Es gibt 92 Produkte.
| Plattenform | SPMR |
| Bearbeitung | Mittlere Bearbeitung |
| Werkstoff | Stahl |
| Sorte | RT250: CVD-Beschichtetes P25-TIN Hartmetall für die allg. Stahlbearbeitung |
| VPE | 10 Stück |
| r | L | I.C. | S | |
| SPMR 110408-PM RT250 | 0,8 | 11,5 | 11,5 | 4,76 |
| Fräserart | VHM-Kugelfräser |
| Spiralwinkel | 35° |
| Werkstoff | Stahl, Edelstahl, Guss |
| Anwendungen | Mittlere Bearbeitung, Schlichten |
| Ausführung | Standardlänge |
| Schaft | Zylinderschaft |
| Schneiden | 2 |
| Sorte | RT405: PVD-TiAlN-Beschichtete High-Performance-Sorte für VHM-Fräser |
| VPE | 1 Stück |
- 2-Schneidiger VHM-Kugelfräser
- über Mitte schneidend
- Spiralwinkel 35°
| D | r | d | H | L | Z | |
| KFS-Z2-D0.3 RT405 | 0,3 | 0,15 | 4 | 0,5 | 50 | 2 |
| KFS-Z2-D0.4 RT405 | 0,4 | 0,2 | 4 | 0,6 | 50 | 2 |
| KFS-Z2-D0.5 RT405 | 0,5 | 0,25 | 4 | 0,8 | 50 | 2 |
| KFS-Z2-D0.6 RT405 | 0,6 | 0,3 | 4 | 0,9 | 50 | 2 |
| KFS-Z2-D0.7 RT405 | 0,7 | 0,35 | 4 | 1 | 50 | 2 |
| KFS-Z2-D0.8 RT405 | 0,8 | 0,4 | 4 | 1,2 | 50 | 2 |
| KFS-Z2-D0.9 RT405 | 0,9 | 0,45 | 4 | 1,3 | 50 | 2 |
| KFS-Z2-D1.0 RT405 | 1 | 0,5 | 4 | 1,5 | 50 | 2 |
| KFS-Z2-D1.2 RT405 | 1,2 | 0,6 | 4 | 1,8 | 50 | 2 |
| KFS-Z2-D1.4 RT405 | 1,4 | 0,7 | 4 | 2 | 50 | 2 |
| KFS-Z2-D1.5 RT405 | 1,5 | 0,75 | 4 | 2,3 | 50 | 2 |
| KFS-Z2-D1.6 RT405 | 1,6 | 0,8 | 4 | 2,5 | 50 | 2 |
| KFS-Z2-D1.8 RT405 | 1,8 | 0,9 | 4 | 2,7 | 50 | 2 |
| KFS-Z2-D2.0 RT405 | 2 | 1 | 4 | 3 | 50 | 2 |
| KFS-Z2-D2.5 RT405 | 2,5 | 1,25 | 4 | 3,7 | 50 | 2 |
| KFS-Z2-D3.0 RT405 | 3 | 1,5 | 4 | 4,5 | 50 | 2 |
| Plattenform | SNHX |
| Werkstoff | Stahl und Edelstahl |
| Sorte | RT302: PVD-Beschichtetes P15-P30 & M25-M40 Hartmetallsorte für mittlere bis Schruppbearbeitung von nichtrostendem Stahl und Stahl (Fräsen) |
| VPE | 10 Stück |
| d | L | I.C. | S | |
| SNHX 1202 RT302 | 5 | 12,7 | 12,7 | 2,3 |
| SNHX 1203 RT302 | 5 | 12,7 | 12,7 | 3 |
| SNHX 12T3 RT302 | 5 | 12,7 | 12,7 | 3,5 |
| Fräserart | VHM Alu-Schaftfräser |
| Spiralwinkel | 30° |
| Werkstoff | NE-Metalle |
| Ausführung | Standardlänge |
| Schaft | Zylinder Schaft |
| Schneiden | 1 |
| Beschichtung | RT30K: Unbeschichtetes K30 Hartmetallsubstrat für die Bearbeitung von NE-Metallen |
| VPE | 1 Stück |
- 1-Schneidiger VHM Alu-Schaftfräser
- über Mitte schneidend
| D | d | H |
L | Z | |
| AF-Z1-D2.0 RT30K | 2,0 | 3 | 8 | 50 | 1 |
| AF-Z1-D3.0 RT30K | 3,0 | 3 | 12 | 50 | 1 |
| AF-Z1-D4.0 RT30K | 4,0 | 4 | 15 | 60 | 1 |
| AF-Z1-D5.0 RT30K | 5,0 | 5 | 17 | 60 | 1 |
| AF-Z1-D6.0 RT30K | 6,0 | 6 | 20 | 65 | 1 |
| AF-Z1-D8.0 RT30K | 8,0 | 8 | 22 | 65 | 1 |
| AF-Z1-D10.0 RT30K | 10,0 | 10 | 25 | 75 | 1 |
| AF-Z1-D12.0 RT30K | 12,0 | 12 | 30 | 80 | 1 |
| Fräserart | VHM Alu-Schaftfräser |
| Spiralwinkel | 55° |
| Werkstoff | NE-Metalle |
| Ausführung | Standardlänge |
| Schaft | Zylinderschaft |
| Schneiden | 2 |
| Sorte | RT30K: Unbeschichtetes K30 Hartmetallsubstrat für die Bearbeitung von NE-Metallen |
| VPE | 1 Stück |
- 2-Schneidiger VHM Alu-Schaftfräser
- über Mitte schneidend
| D | d(h6) | H | L | Z | Version | |
| AF-Z2-D1.0 RT30K | 1 | 4 | 3 | 50 | 2 | A |
| AF-Z2-D1.5 RT30K | 1,5 | 4 | 4 | 50 | 2 | A |
| AF-Z2-D2.0 RT30K | 2 | 4 | 6 | 50 | 2 | A |
| AF-Z2-D2.5 RT30K | 2,5 | 4 | 7 | 50 | 2 | A |
| AF-Z2-D3.0 RT30K | 3 | 6 | 9 | 50 | 2 | A |
| AF-Z2-D4.0 RT30K | 4 | 6 | 12 | 50 | 2 | A |
| AF-Z2-D5.0 RT30K | 5 | 6 | 15 | 50 | 2 | A |
| AF-Z2-D6.0 RT30K | 6 | 6 | 18 | 60 | 2 | B |
| AF-Z2-D8.0 RT30K | 8 | 8 | 20 | 60 | 2 | B |
| AF-Z2-D10.0 RT30K | 10 | 10 | 30 | 75 | 2 | B |
| AF-Z2-D12.0 RT30K | 12 | 12 | 32 | 75 | 2 | B |
| AF-Z2-D16.0 RT30K | 16 | 16 | 45 | 100 | 2 | B |
| AF-Z2-D20.0 RT30K | 20 | 20 | 45 | 100 | 2 | B |
| Fräserart | VHM Alu-Schaftfräser |
| Spiralwinkel | 55° |
| Werkstoff | NE-Metalle |
| Ausführung | Langversion |
| Schaft | Zylinderschaft |
| Schneiden | 2 |
| Sorte | RT30K: Unbeschichtetes K30 Hartmetallsubstrat für die Bearbeitung von NE-Metallen |
| VPE | 1 Stück |
- 2-Schneidiger VHM Alu-Schaftfräser
- über Mitte schneidend
| D | d(h6) | H | L | Z | Version | |
| AFL-Z2-D3.0 RT30K | 3 | 6 | 12 | 60 | 2 | A |
| AFL-Z2-D4.0 RT30K | 4 | 6 | 16 | 60 | 2 | A |
| AFL-Z2-D5.0 RT30K | 5 | 6 | 20 | 60 | 2 | A |
| AFL-Z2-D6.0 RT30K | 6 | 6 | 25 | 75 | 2 | B |
| AFL-Z2-D8.0 RT30K | 8 | 8 | 32 | 75 | 2 | B |
| AFL-Z2-D10.0 RT30K | 10 | 10 | 45 | 100 | 2 | B |
| AFL-Z2-D12.0 RT30K | 12 | 12 | 45 | 100 | 2 | B |
| AFL-Z2-D16.0 RT30K | 16 | 16 | 65 | 150 | 2 | B |
| AFL-Z2-D20.0 RT30K | 20 | 20 | 75 | 150 | 2 | B |
| Fräserart | VHM Alu-Schaftfräser |
| Spiralwinkel | 30° |
| Werkstoff | NE-Metalle |
| Ausführung | Standardlänge |
| Schaft | Zylinderschaft |
| Schneiden | 3 |
| Sorte | RT30K: Unbeschichtetes K30 Hartmetallsubstrat für die Bearbeitung von NE-Metallen |
| VPE | 1 Stück |
- 3-Schneidiger VHM Alu-Schaftfräser
- über Mitte schneidend
| D | d(h6) | H | L | Z | Version | |
| AF-Z3-D2.0 RT30K | 2 | 4 | 6 | 50 | 3 | A |
| AF-Z3-D3.0 RT30K | 3 | 6 | 9 | 50 | 3 | A |
| AF-Z3-D4.0 RT30K | 4 | 6 | 12 | 50 | 3 | A |
| AF-Z3-D5.0 RT30K | 5 | 6 | 15 | 50 | 3 | A |
| AF-Z3-D6.0 RT30K | 6 | 6 | 18 | 60 |
3 | B |
| AF-Z3-D8.0 RT30K | 8 | 8 | 20 | 60 | 3 |
B |
| AF-Z3-D10.0 RT30K | 10 | 10 | 30 | 75 |
3 |
B |
| AF-Z3-D12.0 RT30K | 12 | 12 | 30 | 75 |
3 |
B |
| AF-Z3-D16.0 RT30K | 16 | 16 | 45 | 100 |
3 |
B |
| AF-Z3-D20.0 RT30K | 20 | 20 | 45 | 100 | 3 | B |
| Fräserart | VHM Alu-Schaftfräser |
| Spiralwinkel | 45° |
| Werkstoff | NE-Metalle |
| Ausführung | Langversion |
| Schaft | Zylinderschaft |
| Schneiden | 3 |
| Sorte | RT30K: Unbeschichtetes K30 Hartmetallsubstrat für die Bearbeitung von NE-Metallen |
| VPE | 1 Stück |
- 3-Schneidiger VHM Alu-Schaftfräser
- über Mitte schneidend
| D | d(h6) | H | L | Z | Version | |
| AFL-Z3-D3.0 RT30K | 3 | 6 | 12 | 60 | 3 | A |
| AFL-Z3-D4.0 RT30K | 4 | 6 | 16 | 60 | 3 | A |
| AFL-Z3-D5.0 RT30K | 5 | 6 | 20 | 60 | 3 | A |
| AFL-Z3-D6.0 RT30K | 6 | 6 | 25 | 75 | 3 | B |
| AFL-Z3-D8.0 RT30K | 8 | 8 | 32 | 75 |
3 |
B |
| AFL-Z3-D10.0 RT30K | 10 | 10 | 45 | 100 |
3 |
B |
| AFL-Z3-D12.0 RT30K | 12 | 12 | 45 | 100 |
3 |
B |
| AFL-Z3-D16.0 RT30K | 16 | 16 | 65 | 150 |
3 |
B |
| AFL-Z3-D20.0 RT30K | 20 | 20 | 75 | 150 | 3 | B |
| Fräserart | VHM Alu-Schaftfräser |
| Spiralwinkel | 35° |
| Werkstoff | NE-Metalle |
| Ausführung | Standardlänge |
| Schaft | Zylinderschaft |
| Schneiden | 3 |
| Sorte | RT30K: Unbeschichtetes K30 Hartmetallsubstrat für die Bearbeitung von NE-Metallen |
| VPE | 1 Stück / Set 5 St. |
- 3-Schneidiger VHM Alu-Schaftfräser
- über Mitte schneidend
| D | d | H | L | Z | Version | |
| AF-P-Z3-D3.0 RT30K | 3 | 6 | 9 | 50 | 3 | A |
| AF-P-Z3-D4.0 RT30K | 4 | 6 | 10 | 50 | 3 | A |
| AF-P-Z3-D5.0 RT30K | 5 | 6 | 13 | 50 | 3 | A |
| AF-P-Z3-D6.0 RT30K | 6 | 6 | 16 | 50 | 3 | B |
| AF-P-Z3-D8.0 RT30K | 8 | 8 | 20 | 60 | 3 | B |
| AF-P-Z3-D10.0 RT30K | 10 | 10 | 25 | 75 | 3 | B |
| AF-P-Z3-D12.0 RT30K | 12 | 12 | 30 | 75 | 3 | B |
| AF-P-Z3-D16.0 RT30K | 16 | 16 | 36 | 100 | 3 | B |
| AF-P-Z3-D20.0 RT30K | 20 | 20 | 45 | 100 | 3 | B |
| Fräserart | VHM Alu-Schaftfräser |
| Spiralwinkel | 35° |
| Werkstoff | NE-Metalle |
| Ausführung | Langversion |
| Schaft | Zylinderschaft |
| Schneiden | 3 |
| Sorte | RT30K: Unbeschichtetes K30 Hartmetallsubstrat für die Bearbeitung von NE-Metallen |
| VPE | 1 Stück / Set 5 St. |
- 3-Schneidiger VHM Alu-Schaftfräser
- über Mitte schneidend
| D | d(h6) | H | L | Z | Version | |
| AFL-P-Z3-D3.0 RT30K | 3 | 6 | 12 | 75 | 3 | A |
| AFL-P-Z3-D4.0 RT30K | 4 | 6 | 15 | 75 | 3 | A |
| AFL-P-Z3-D5.0 RT30K | 5 | 6 | 20 | 75 | 3 | A |
| AFL-P-Z3-D6.0 RT30K | 6 | 6 | 25 | 75 | 3 | B |
| AFL-P-Z3-D8.0 RT30K | 8 | 8 | 32 | 75 |
3 |
B |
| AFL-P-Z3-D10.0 RT30K | 10 | 10 | 45 | 100 |
3 |
B |
| AFL-P-Z3-D12.0 RT30K | 12 | 12 | 45 | 100 |
3 |
B |
| AFL-P-Z3-D16.0 RT30K | 16 | 16 | 65 | 150 |
3 |
B |
| AFL-P-Z3-D20.0 RT30K | 20 | 20 | 75 | 150 | 3 | B |
| Fräserart | VHM Alu-Schaftfräser |
| Spiralwinkel | 35° |
| Werkstoff | NE-Metalle |
| Ausführung | Extra langer Schaft |
| Schaft | Zylinderschaft |
| Schneiden | 3 |
| Sorte | RT30K: Unbeschichtetes K30 Hartmetallsubstrat für die Bearbeitung von NE-Metallen |
| VPE | 1 Stück / Set 5 St. |
- 3-Schneidiger VHM Alu-Schaftfräser
- über Mitte schneidend
| D | d(h6) | H | L | Z | |
| AFEL-P-Z3-D6.0 RT30K | 6 | 6 | 16 | 100 | 3 |
| AFEL-P-Z3-D8.0 RT30K |
8 | 8 | 20 | 100 | 3 |
| AFEL-P-Z3-D10.0 RT30K |
10 | 10 | 25 | 150 |
3 |
| AFEL-P-Z3-D12.0 RT30K |
12 | 12 | 30 | 150 |
3 |
| Fräserart | VHM Alu-Kugelfräser |
| Spiralwinkel | 30° |
| Werkstoff | NE-Metalle |
| Ausführung | Standardlänge |
| Schaft | Zylinderschaft |
| Schneiden | 2 |
| Beschichtung | RT30K: Unbeschichtetes K30 Hartmetallsubstrat für die Bearbeitung von NE-Metallen |
| VPE | 1 Stück |
- 2-Schneidiger VHM Alu-Schaftfräser
- über Mitte schneidend
| D | r | d2(h6) | d1 | H | M | L | Z | |
| AKF-Z2-D3.0 RT30K | 3 | 1,5 | 6 | 2,8 | 6 | 9 | 57 | 2 |
| AKF-Z2-D4.0 RT30K | 4 | 2 | 6 | 3,7 | 8 | 12 | 57 | 2 |
| AKF-Z2-D5.0 RT30K | 5 | 2,5 | 6 | 4,6 | 10 | 15 | 57 | 2 |
| AKF-Z2-D6.0 RT30K | 6 | 3 | 6 | 5,5 | 12 | 20 | 57 | 2 |
| AKF-Z2-D8.0 RT30K | 8 | 4 | 8 | 7,4 | 16 | 26 | 63 | 2 |
| AKF-Z2-D10.0 RT30K | 10 | 5 | 10 | 9,2 | 20 | 31 | 72 | 2 |
| AKF-Z2-D12.0 RT30K | 12 | 6 | 12 | 11 | 24 | 37 | 83 | 2 |
| AKF-Z2-D16.0 RT30K | 16 | 8 | 16 | 15 | 32 | 43 | 92 | 2 |
| Fräserart | VHM Alu-Kugelfräser |
| Spiralwinkel | 30° |
| Werkstoff | NE-Metalle |
| Ausführung | Langversion |
| Schaft | Zylinderschaft |
| Schneiden | 2 |
| Sorte | RT30K: Unbeschichtetes K30 Hartmetallsubstrat für die Bearbeitung von NE-Metallen |
| VPE | 1 Stück |
- 2-Schneidiger VHM Alu-Schaftfräser
- über Mitte schneidend
| D | r | d2(h6) | d1 | H | M | L | Z | |
| AKFL-Z2-D3.0 RT30K | 3 | 1,5 | 6 | 2,8 | 6 | 9 | 75 | 2 |
| AKFL-Z2-D4.0 RT30K | 4 | 2 | 6 | 3,7 | 8 | 12 | 75 | 2 |
| AKFL-Z2-D5.0 RT30K | 5 | 2,5 | 6 | 4,6 | 10 | 15 | 80 | 2 |
| AKFL-Z2-D6.0 RT30K | 6 | 3 | 6 | 5,5 | 12 | 20 | 80 | 2 |
| AKFL-Z2-D8.0 RT30K | 8 | 4 | 8 | 7,4 | 16 | 26 | 90 | 2 |
| AKFL-Z2-D10.0 RT30K | 10 | 5 | 10 | 9,2 | 20 | 31 | 100 | 2 |
| AKFL-Z2-D12.0 RT30K | 12 | 6 | 12 | 11 | 24 | 37 | 120 | 2 |
| AKFL-Z2-D16.0 RT30K | 16 | 8 | 16 | 15 | 32 | 43 | 140 | 2 |
| Fräserart | VHM Alu-Schruppfräser |
| Spiralwinkel | 30° |
| Werkstoff | NE-Metalle |
| Anwendung | Schruppen |
| Ausführung | Standardlänge |
| Schaft | Zylinderschaft |
| Schneiden | 3 |
| Sorte | RT30K: Unbeschichtetes K30 Hartmetallsubstrat für die Bearbeitung von NE-Metallen |
| VPE | 1 Stück |
- über Mitte schneidend
| D | d | H | L | Eckfase | |
| AFR-Z3-D6.0 RT30K | 6,0 | 6 | 16 | 57 | 0,60 |
| AFR-Z3-D7.0 RT30K | 7,0 | 8 | 16 | 63 | 0,60 |
| AFR-Z3-D8.0 RT30K | 8,0 | 8 | 16 | 63 | 0,60 |
| AFR-Z3-D9.0 RT30K |
9,0 | 10 | 19 | 72 | 0,60 |
| AFR-Z3-D10.0 RT30K | 10,0 | 10 | 22 | 72 | 0,60 |
| AFR-Z3-D12.0 RT30K |
12,0 | 12 | 26 | 83 | 0,60 |
| AFR-Z3-D14.0 RT30K | 14,0 | 14 | 26 | 83 | 0,91 |
| AFR-Z3-D16.0 RT30K | 16,0 | 16 | 32 | 92 | 0,91 |
| AFR-Z3-D18.0 RT30K | 18,0 | 18 | 32 | 92 | 0,91 |
| AFR-Z3-D20.0 RT30K | 20,0 | 20 | 38 | 104 | 0,91 |
| AFR-Z3-D25.0 RT30K | 25,0 | 25 | 45 | 121 | 0,91 |
| Fräserart | VHM Alu-Schaftfräser (DLC) |
| Spiralwinkel | 37° |
| Werkstoff | NE-Metalle |
| Ausführung | Standardlänge |
| Schaft | Zylinderschaft |
| Schneiden | 3 |
| Sorte | RT107: Die DLC-Beschichtung (Diamond-Like-Carbon) aus diamantähnlichem Kohlenstoff sorgt für einen niedrigeren Verschleiß. |
| VPE | 1 Stück |
- über Mitte schneidend
| D | d | H | L | Z | |
| AF-Z3-D3.0 RT107 | 3,0 | 6 | 8 | 52 | 3 |
| AF-Z3-D4.0 RT107 | 4,0 | 6 | 11 | 55 | 3 |
| AF-Z3-D5.0 RT107 | 5,0 | 6 | 13 | 57 | 3 |
| AF-Z3-D6.0 RT107 | 6,0 | 6 | 13 | 57 | 3 |
| AF-Z3-D8.0 RT107 | 8,0 | 8 | 19 |
63 | 3 |
| AF-Z3-D10.0 RT107 | 10,0 | 10 | 22 |
72 |
3 |
| AF-Z3-D12.0 RT107 | 12,0 | 12 | 26 |
83 |
3 |
| AF-Z3-D16.0 RT107 | 16,0 | 16 | 32 |
92 |
3 |
| AF-Z3-D20.0 RT107 | 20,0 | 20 | 38 | 104 | 3 |
| Fräserart | VHM Alu-Schaftfräser (DLC) |
| Spiralwinkel | 37° |
| Werkstoff | NE-Metalle |
| Ausführung | Langversion |
| Schaft | Zylinderschaft |
| Zähne | 3 |
| Beschichtung | RT107: Die DLC-Beschichtung (Diamond-Like-Carbon) aus diamantähnlichem Kohlenstoff sorgt für einen niedrigeren Verschleiß. |
| VPE | 1 Stück |
- über Mitte schneidend
| D | d | H | L | Z | |
| AFL-Z3-D6.0 RT107 | 6,0 | 6 | 24 | 75 | 3 |
| AFL-Z3-D8.0 RT107 | 8,0 | 8 | 32 | 75 | 3 |
| AFL-Z3-D10.0 RT107 | 10,0 | 10 | 40 | 100 | 3 |
| AFL-Z3-D12.0 RT107 | 12,0 | 12 | 48 |
100 | 3 |
| AFL-Z3-D16.0 RT107 | 16,0 | 16 | 64 | 125 |
3 |
| AFL-Z3-D20.0 RT107 | 20,0 | 20 | 80 |
150 |
3 |
| AFL-Z3-D25.0 RT107 | 25,0 | 25 | 50 | 125 | 3 |
| Fräserart | VHM Alu-Schaftfräser mit Eckenradius (DLC) |
| Spiralwinkel | 37° |
| Werkstoff | NE-Metalle |
| Ausführung | Standardlänge |
| Schaft | Zylinderschaft |
| Schneiden | 3 |
| Beschichtung | RT107: Die DLC-Beschichtung (Diamond-Like-Carbon) aus diamantähnlichem Kohlenstoff sorgt für einen niedrigeren Verschleiß. |
| VPE | 1 Stück |
- über Mitte schneidend
| D | r | d | H | L | Z | |
| AF-Z3-D6.0-R0,5 RT107 | 6 | R0,5 | 6 | 13 | 57 | 3 |
| AF-Z3-D6.0-R1,0 RT107 | 6 | R1,0 | 6 | 13 | 57 | 3 |
| AF-Z3-D6.0-R1,5 RT107 | 6 | R1,5 | 6 | 13 | 57 | 3 |
| AF-Z3-D8.0-R0,3 RT107 | 8 | R0,3 | 8 | 19 | 63 | 3 |
| AF-Z3-D8.0-R0,5 RT107 | 8 | R0,5 | 8 | 19 |
63 | 3 |
| AF-Z3-D8.0-R1,0 RT107 | 8 | R1,0 | 8 | 19 | 63 | 3 |
| AF-Z3-D8.0-R1,5 RT107 | 8 | R1,5 | 8 | 19 |
63 |
3 |
| AF-Z3-D10.0-R0,3 RT107 | 10 | R0,3 | 10 | 22 |
72 |
3 |
| AF-Z3-D10.0-R0,5 RT107 | 10 | R0,5 | 10 | 22 |
72 |
3 |
| AF-Z3-D10.0-R1,0 RT107 | 10 | R1,0 | 10 | 22 | 72 | 3 |
| AF-Z3-D10.0-R1,5 RT107 | 10 | R1,5 | 10 | 22 | 72 | 3 |
| AF-Z3-D12.0-R1,5 RT107 | 12 | R1,5 | 12 | 26 | 83 | 3 |
| AF-Z3-D12.0-R2,0 RT107 | 12 | R2,0 | 12 | 26 | 83 | 3 |
| AF-Z3-D12.0-R2,5 RT107 | 12 | R2,5 | 12 | 26 | 83 | 3 |
| AF-Z3-D12.0-R3,0 RT107 | 12 | R3,0 | 12 | 26 | 83 | 3 |
| AF-Z3-D16.0-R1,5 RT107 | 16 | R1,5 | 16 | 32 | 92 | 3 |
| AF-Z3-D16.0-R2,0 RT107 | 16 | R2,0 | 16 | 32 | 92 | 3 |
| AF-Z3-D16.0-R2,5 RT107 | 16 | R2,5 | 16 | 32 | 92 | 3 |
| AF-Z3-D16.0-R3,0 RT107 | 16 | R3,0 | 16 | 32 | 92 | 3 |
| AF-Z3-D16.0-R4,0 RT107 | 16 | R4,0 | 16 | 32 | 92 | 3 |
| AF-Z3-D20.0-R2,0 RT107 | 20 | R2,0 | 20 | 38 | 104 | 3 |
| AF-Z3-D20.0-R2,5 RT107 | 20 | R2,5 | 20 | 38 | 104 | 3 |
| AF-Z3-D20.0-R3,0 RT107 | 20 | R3,0 | 20 | 38 | 104 | 3 |
| AF-Z3-D20.0-R4,0 RT107 | 20 | R4,0 | 20 | 38 | 104 | 3 |
| Fräserart | VHM Alu-Schaftfräser mit Eckenradius (DLC) |
| Spiralwinkel | 37° |
| Werkstoff | NE-Metalle |
| Ausführung | Langversion |
| Schaft | Zylinderschaft |
| Schneiden | 3 |
| Sorte | RT107: Die DLC-Beschichtung (Diamond-Like-Carbon) aus diamantähnlichem Kohlenstoff sorgt für einen niedrigeren Verschleiß. |
| VPE | 1 Stück |
- über Mitte schneidend
| D | r | d | H | L | Z | |
| AFL-Z3-D6.0-R0,5 RT107 | 6 | R0,5 | 6 | 24 | 75 | 3 |
| AFL-Z3-D6.0-R1,0 RT107 | 6 | R1,0 | 6 | 24 | 75 | 3 |
| AFL-Z3-D8.0-R0,5 RT107 | 8 | R0,5 | 8 | 32 | 75 | 3 |
| AFL-Z3-D8.0-R1,0 RT107 | 8 | R1,0 | 8 | 32 | 75 | 3 |
| AFL-Z3-D8.0-R1,5 RT107 | 8 | R1,5 | 8 | 32 | 75 | 3 |
| AFL-Z3-D8.0-R2,0 RT107 | 8 | R2,0 | 8 | 32 | 75 | 3 |
| AFL-Z3-D10.0-R0,5 RT107 | 10 | R0,5 | 10 | 40 | 100 | 3 |
| AFL-Z3-D10.0-R1,0 RT107 | 10 | R1,0 | 10 | 40 | 100 | 3 |
| AFL-Z3-D10.0-R1,5 RT107 | 10 | R1,5 | 10 | 40 | 100 | 3 |
| AFL-Z3-D10.0-R2,0 RT107 | 10 | R2,0 | 10 | 40 | 100 | 3 |
| AFL-Z3-D12.0-R0,5 RT107 | 12 | R0,5 | 12 | 48 | 100 | 3 |
| AFL-Z3-D12.0-R1,0 RT107 | 12 | R1,0 | 12 | 48 | 100 | 3 |
| AFL-Z3-D12.0-R1,5 RT107 | 12 | R1,5 | 12 | 48 | 100 | 3 |
| AFL-Z3-D12.0-R2,0 RT107 | 12 | R2,0 | 12 | 48 | 100 | 3 |
| AFL-Z3-D12.0-R2,5 RT107 | 12 | R2,5 | 12 | 48 | 100 | 3 |
| AFL-Z3-D12.0-R3,0 RT107 | 12 | R3,0 | 12 | 48 | 100 | 3 |
| AFL-Z3-D16.0-R0,5 RT107 | 16 | R0,5 | 16 | 64 | 125 | 3 |
| AFL-Z3-D16.0-R1,0 RT107 | 16 | R1,0 | 16 | 64 | 125 | 3 |
| AFL-Z3-D16.0-R1,5 RT107 | 16 | R1,5 | 16 | 64 | 125 | 3 |
| AFL-Z3-D16.0-R2,0 RT107 | 16 | R2,0 | 16 | 64 | 125 | 3 |
| AFL-Z3-D16.0-R2,5 RT107 | 16 | R2,5 | 16 | 64 | 125 | 3 |
| AFL-Z3-D16.0-R3,0 RT107 | 16 | R3,0 | 16 | 64 | 125 | 3 |
| AFL-Z3-D16.0-R4,0 RT107 | 16 | R4,0 | 16 | 64 | 125 | 3 |
| AFL-Z3-D20.0-R0,5 RT107 | 20 | R0,5 | 20 | 80 | 150 | 3 |
| AFL-Z3-D20.0-R1,0 RT107 | 20 | R1,0 | 20 | 80 | 150 | 3 |
| AFL-Z3-D20.0-R1,5 RT107 | 20 | R1,5 | 20 | 80 | 150 | 3 |
| AFL-Z3-D20.0-R2,0 RT107 | 20 | R2,0 | 20 | 80 | 150 | 3 |
| AFL-Z3-D20.0-R2,5 RT107 | 20 | R2,5 | 20 | 80 | 150 | 3 |
| AFL-Z3-D20.0-R3,0 RT107 | 20 | R3,0 | 20 | 80 | 150 | 3 |
| AFL-Z3-D20.0-R4,0 RT107 | 20 | R4,0 | 20 | 80 | 150 | 3 |
| Fräserart | VHM Alu-Schaftfräser |
| Spiralwinkel | 35° |
| Werkstoff | NE-Metalle |
| Ausführung | Standardlänge |
| Schaft | Zylinderschaft |
| Schneiden | 3 |
| Sorte | RT107: Die DLC-Beschichtung (Diamond-Like-Carbon) aus diamantähnlichem Kohlenstoff sorgt für einen geringeren Werkzeugverschleiß. |
| VPE | 1 Stück |
- 3-Schneidiger VHM Alu-Schaftfräser
- über Mitte schneidend
| D | d | H | L | Z | Version | |
| AF-P-Z3-D4.0 RT107 | 4 | 6 | 10 | 50 | 3 | A |
| AF-P-Z3-D5.0 RT107 | 5 | 6 | 13 | 50 | 3 | A |
| AF-P-Z3-D6.0 RT107 | 6 | 6 | 16 | 50 | 3 | B |
| AF-P-Z3-D8.0 RT107 | 8 | 8 | 20 | 60 | 3 | B |
| AF-P-Z3-D10.0 RT107 | 10 | 10 | 25 | 75 | 3 | B |
| AF-P-Z3-D12.0 RT107 | 12 | 12 | 30 | 75 | 3 | B |
| AF-P-Z3-D16.0 RT107 | 16 | 16 | 45 | 100 | 3 | B |
| AF-P-Z3-D20.0 RT107 | 20 | 20 | 45 | 100 | 3 | B |
| Fräserart | VHM Alu-Schaftfräser |
| Spiralwinkel | 35° |
| Werkstoff | NE-Metalle |
| Ausführung | Langversion |
| Schaft | Zylinderschaft |
| Schneiden | 3 |
| Sorte | RT107: Die DLC-Beschichtung (Diamond-Like-Carbon) aus diamantähnlichem Kohlenstoff sorgt für einen geringeren Werkzeugverschleiß. |
| VPE | 1 Stück / Set 5 St. |
- 3-Schneidiger VHM Alu-Schaftfräser
- über Mitte schneidend
| D | d | H | L | Z | Version | |
| AFL-P-Z3-D4.0 RT107 | 4 | 6 | 15 | 75 | 3 | A |
| AFL-P-Z3-D5.0 RT107 | 5 | 6 | 20 | 75 | 3 | A |
| AFL-P-Z3-D6.0 RT107 | 6 | 6 | 25 | 75 | 3 | B |
| AFL-P-Z3-D8.0 RT107 | 8 | 8 | 32 | 75 | 3 | B |
| AFL-P-Z3-D10.0 RT107 | 10 | 10 | 45 | 100 | 3 | B |
| AFL-P-Z3-D12.0 RT107 | 12 | 12 | 45 | 100 | 3 | B |
English
Deutsch
