VHM Hart-Torusfräser bis 68 HRC
Fräserart | VHM Hart-Torusfräser |
Spiralwinkel | 35° |
Werkstoff | Harte Werkstoffe bis 68 HRC |
Ausführung | Standardlänge |
Schaft | Zylinderschaft |
Schneiden | 4 |
Sorte | RT555: PVD-beschichtetes Hartmetallsubstrat für die Hartbearbeitung von Stahl (bis HRC 55-68). Höchste Verschleißfestigkeit und Zähigkeit |
VPE | 1 Stück |
- 4-Schneidiger VHM-Hart-Torusfräser
- über Mitte schneidend
- PVD-Beschichtet
D | r | d(h6) | H | L | Z | |
HTFR-Z4-D3.0-R0.2 RT555 | 3 | 0,2 | 4 | 8 | 50 | 4 |
HTFR-Z4-D4.0-R0.3 RT555 | 4 | 0,3 | 4 | 10 | 50 | 4 |
HTFR-Z4-D4.0-R0.5 RT555 | 4 | 0,5 | 4 | 10 | 50 |
4 |
HTFR-Z4-D5.0-R0.5 RT555 | 5 | 0,5 | 6 | 13 | 50 |
4 |
HTFR-Z4-D5.0-R1.0 RT555 | 5 | 1 | 6 | 13 | 50 |
4 |
HTFR-Z4-D6.0-R0.5 RT555 | 6 | 0,5 | 6 | 16 | 50 |
4 |
HTFR-Z4-D6.0-R1,0 RT555 | 6 | 1 | 6 | 16 | 50 |
4 |
HTFR-Z4-D8.0-R0,5 RT555 | 8 | 0,5 | 8 | 20 | 60 | 4 |
HTFR-Z4-D8.0-R1,0 RT555 | 8 | 1 | 8 | 20 | 60 | 4 |
HTFR-Z4-D10.0-R0.5 RT555 | 10 | 0,5 | 10 | 25 | 75 | 4 |
HTFR-Z4-D10.0-R1.0 RT555 | 10 | 1 | 10 | 25 | 75 | 4 |
HTFR-Z4-D10.0-R2.0 RT555 | 10 | 2 | 10 | 25 | 75 | 4 |
HTFR-Z4-D10.0-R3.0 RT555 | 10 | 3 | 10 | 25 | 75 | 4 |
HTFR-Z4-D12.0-R0,5 RT555 | 12 | 0,5 | 12 | 30 | 75 | 4 |
HTFR-Z4-D12.0-R1.0 RT555 | 12 | 1 | 12 | 30 | 75 | 4 |
HTFR-Z4-D12.0-R2.0 RT555 | 12 | 2 | 12 | 30 | 75 | 4 |
HTFR-Z4-D12.0-R3.0 RT555 | 12 | 3 | 12 | 30 | 75 | 4 |