Negative turning inserts have a cutting angle smaller than zero. The cutting angle required for machining results from the positioning of the insert in the tool holder.
Our range of negative turning inserts includes a wide variety of grades, geometries, and applications.
Here, you will find the right insert for every material.
on orders over €150
Tel.: +49 (0)208 - 848 67 82
There are 4 products.
| Shape | CNGG |
| Processing | Finish |
| Workpiece Material | Heat resistant super alloys |
| Grade | RT110S: PVD-TialSin coated S10 carbide for heat resistant super alloys |
| Packaging unit | 10 Pc. |
| r | L | I.C. | S | d | |
| CNGG 120404-SF RT110S | 0,4 | 12 | 12,7 | 4,76 | 5,16 |
| CNGG 120408-SF RT110S | 0,8 | 12 | 12,7 | 4,76 | 5,16 |
| Shape | CNMG |
| Processing | Mittel |
| Workpiece Material | Heat resistant super alloys |
| Grade | RT110S: PVD-TialSin coated S10 carbide for special materials |
| Packaging unit | 10 Pc. |
| r | L | I.C. | S | d | |
| CNMG 120408-SM RT110S | 0,8 | 12 | 12,7 | 4,76 | 5,16 |
| CNMG 120412-SM RT110S | 1,2 | 12 | 12,7 | 4,76 | 5,16 |
| Shape | CNMG |
| Processing | Roughing |
| Workpiece Material | Heat resistant super alloys |
| Grade | RT110S: PVD-TialSin coated S10 carbide for special materials |
| Packaging unit | 10 Pc. |
| r | L | I.C. | S | d | |
| CNMG 120408-SR RT110S | 0,8 | 12 | 12,7 | 4,76 | 5,16 |
| CNMG 120412-SR RT110S | 1,2 | 12 | 12,7 | 4,76 | 5,16 |
| Shape | CNMG |
| Processing | Roughing |
| Workpiece Material | Heat resistant super alloys |
| Grade | RT130S: PVD-High Performance Insert for nickel-based alloys such as heat-resistant and titanium alloys |
| Packaging unit | 10 Pc. |
PVD-High Performance Insert for nickel-based alloys such as heat-resistant and titanium alloys
| L | I.C | S | d | r | |
| CNMG 120408-RSN RT130S | 12,9 | 12,7 | 4,76 | 5,16 | 0,8 |
Deutsch
English