There are 22 products.
| Boring Bar | CKUNR |
| Setting Angle | 93° |
| Insert | KNUX L |
| Main application | Longitudinal turning |
| Clamping | Claw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| S25S CKUNR 16 | 25 | 23 | 250 | 21,5 | ≥34 | KNUX 1604.. L |
| S32T CKUNR 16 | 32 | 30 | 300 | 24 | ≥40 | KNUX 1604.. L |
| S40U CKUNR 16 | 40 | 37 | 350 | 30 | ≥50 | KNUX 1604.. L |
| Boring Bar | SCLCR/L |
| Cutting Angle | 95° |
| Insert | CC.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Screw Clamping |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| A08H SCLCR/L 06 with cooling holes | 8 | 7 | 100 | 07 | ≥11 | CCG./CCM. 06.. |
| A10H SCLCR/L 06 with cooling holes | 10 | 9 | 100 | 08 | ≥13 | CCG./CCM. 06.. |
| A12H SCLCR/L 06 with cooling holes | 12 | 11 | 100 | 10 | ≥16 | CCG./CCM. 06.. |
| A16M SCLCR/L 09 with cooling holes | 16 | 15 | 150 | 13 | ≥21 | CCG./CCM. 09.. |
| A20P SCLCR/L 09 with cooling holes | 20 | 18 | 170 | 15 | ≥25 | CCG./CCM. 09.. |
| A25R SCLCR/L 09 with cooling holes | 25 | 23 | 200 | 19,5 | ≥32 | CCG./CCM. 09.. |
| Boring Bar | SDQCR/L |
| Cutting Angle | 107,5° |
| Insert | DC.. |
| Main application | Profiling |
| Clamping | Screw Clamping |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| A10H SDQCR/L-07 with cooling holes | 10 | 09 | 100 | 08 | ≥13 | DCG./DCM. 07.. |
| A12H SDQCR/L-07 with cooling holes | 12 | 11 | 100 | 10 | ≥16 | DCG./DCM. 07.. |
| A16M SDQCR/L-07 with cooling holes | 16 | 15 | 150 | 13 | ≥21 | DCG./DCM. 07.. |
| A16M SDQCR/L-11 with cooling holes |
16 | 15 | 150 | 13 | ≥21 | DCG./DCM. 11.. |
| A20P SDQCR/L-11 with cooling holes |
20 | 18 | 170 | 15 | ≥25 | DCG./DCM. 11.. |
| A25R SDQCR/L-11 with cooling holes |
25 | 23 | 200 | 19,5 | ≥32 | DCG./DCM. 11.. |
| A32S SDQCR/L-11 with cooling holes | 32 | 30 | 250 | 24 | ≥40 | DCG./DCM. 11.. |
| Boring Bar | SDUCR/L |
| Cutting Angle | 93° |
| Insert | DC.. |
| Clamping | Screw Clamping |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| A10H SDUCR/L-07 mit IK | 10 | 09 | 100 | 08 | ≥13 | DCG./DCM. 07.. |
| A12H SDUCR/L-07 mit IK | 12 | 11 | 100 | 10 | ≥16 | DCG./DCM. 07.. |
| A16M SDUCR/L-07 mit IK | 16 | 15 | 150 | 13 | ≥21 | DCG./DCM. 07.. |
| A16M SDUCR/L-11 mit IK | 16 | 15 | 150 | 13 | ≥21 | DCG./DCM. 11.. |
| A20P SDUCR/L-11 mit IK | 20 | 18 | 170 | 15 | ≥25 | DCG./DCM. 11.. |
| A25R SDUCR/L-11 mit IK | 25 | 23 | 200 | 19,5 | ≥32 | DCG./DCM. 11.. |
| A32S SDUCR/L-11 mit IK | 32 | 30 | 250 | 24 | ≥40 | DCG./DCM. 11.. |
| Boring Bar | STFCR/L |
| Cutting Angle | 90° |
| Insert | TC.. |
| Main application | Longitudinal turning |
| Clamping | Screw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| S10K STFCR 11 | 10 | 9 | 125 | 10 | ≥13 | TCG./TCM. 11.. |
| S10K STFCL 11 | 10 | 9 | 125 | 10 | ≥13 | TCG./TCM. 11.. |
| S12K STFCR 11 | 12 | 11 | 125 | 10 | ≥17 | TCG./TCM. 11.. |
| S12K STFCL 11 | 12 | 11 | 125 | 10 | ≥17 | TCG./TCM. 11.. |
| S16P STFCR 11 | 16 | 15 | 170 | 13 | ≥21 | TCG./TCM. 11.. |
| S16P STFCL 11 | 16 | 15 | 170 | 13 | ≥21 | TCG./TCM. 11.. |
| Boring Bar | SVUBR/L |
| Cutting Angle | 93° |
| Insert | VB.. |
| Main Application | Profiling |
| Clamping | Screw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| S16P SVUBR-11 | 16 | 15 | 170 | 13 | ≥21 | VBM. 1103.. |
| S16P SVUBL-11 | 16 | 15 | 170 | 13 | ≥21 | VBM. 1103.. |
| S20R SVUBR-11 | 20 | 18 | 200 | 15 | ≥25 | VBM. 1103.. |
| S20R SVUBL-11 | 20 | 18 | 200 | 15 | ≥25 | VBM. 1103.. |
| S25S SVUBR-16 | 25 | 23 | 250 | 19,5 | ≥32 | VBM. 1604.. |
| S25S SVUBL-16 | 25 | 23 | 250 | 19,5 | ≥32 | VBM. 1604.. |
| S32T SVUBR-16 | 32 | 30 | 300 | 24 | ≥40 | VBM. 1604.. |
| S32T SVUBL-16 | 32 | 30 | 300 | 24 | ≥40 | VBM. 1604.. |
| S40U SVUBR-16 | 40 | 37 | 350 | 30 | ≥50 | VBM. 1604.. |
| S40U SVUBL-16 | 40 | 37 | 350 | 30 | ≥50 | VBM. 1604.. |
| Boring Bar | SVUCR/L |
| Cutting Angle | 93° |
| Insert | VC.. |
| Main application | Profile turning |
| Clamping | Screw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| S16P SVUCR/L-11 | 16 | 15 | 170 | 13 | ≥21 | VCM./VCG. 1103.. |
| S20R SVUCR/L-11 | 20 | 18 | 200 | 15 | ≥25 | VCM./VCG. 1103.. |
| S25S SVUCR/L-16 | 25 | 23 | 250 | 19,5 | ≥32 | VCM./VCG. 1604.. |
| S32T SVUCR/L-16 | 32 | 30 | 300 | 24 | ≥40 | VCM./VCG. 1604.. |
| S40U SVUCR/L-16 | 40 | 37 | 350 | 30 | ≥50 | VCM./VCG. 1604.. |
| Tool Typ | Multifunction Tool |
| Angle | 90° |
| Applications | Longitudinal turning - Facing- Drilling |
| Insert | XC.. |
| Packaging Unit | 1 Pc. |
| d | d1 | d2 | L1 | L2 | L3 | F | |
| SMCR/L 10x2,5 XC..05... | 10 | 12 | 16 | 25 | 32 | 42 | 5 |
| SMCR/L 12x2,5 XC..06... |
12 | 16 | 20 | 30 | 40 | 45 | 6 |
| SMCR/L 16x2,5 XC..08... |
16 | 20 | 25 | 40 | 53 | 50 | 8 |
| SMCR/L 20x2,5 XC..10... |
20 | 25 | 34 | 50 | 66 | 55 | 10 |
| SMCR/L 25x2,5 XC..13.. |
25 | 25 | 34 | 62,5 | 80 | 55 | 12,5 |
| SMCR/L 32x2,5 XC..17... |
32 | 32 |
44 |
80 | 95 |
60 |
16 |
| Boring Bar | SDXCR/L |
| Cutting Angle | 93° |
| Insert | DC.. |
| Hauptanwendung | Back Boring |
| Clamping | Screw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
93° boring bar for Back Boring.
| d | h | L | f | Dmin | Insert | |
| S12K SDXCR-07 | 12 | 11 | 125 | 11 | ≥17 | DCM./DCG. 0702.. |
| S12K SDXCL-07 | 12 | 11 | 125 | 11 | ≥17 | DCM./DCG. 0702.. |
| S16P SDXCR-11 | 16 | 15 | 170 | 13 | ≥21 | DCM./DCG. 11T3.. |
| S16P SDXCL-11 | 16 | 15 | 170 | 13 | ≥21 | DCM./DCG. 11T3.. |
| S20R SDXCR-11 | 20 | 18 | 200 | 15 | ≥25 | DCM./DCG. 11T3.. |
| S20R SDXCL-11 | 20 | 18 | 200 | 15 | ≥25 | DCM./DCG. 11T3.. |
| Boring Bar | TCLNR/L |
| Cutting Angle | 95° |
| Insert | CN.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Claw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
Particularly suitable for roughing due to stable claw clamping.
| d | h | L | f | Dmin | Insert | |
| S20R TCLNR-12 | 20 | 18 | 200 | 15 | ≥26 | CN.. 1204.. |
| S20R TCLNL-12 | 20 | 18 | 200 | 15 | ≥26 | CN.. 1204.. |
| S25S TCLNR-12 | 25 | 23 | 250 | 19,5 | ≥38 | CN.. 1204.. |
| S25S TCLNL-12 | 25 | 23 | 250 | 19,5 | ≥38 | CN.. 1204.. |
| S32T TCLNR-12 | 32 | 30 | 300 | 24 | ≥40 |
CN.. 1204.. |
| S32T TCLNL-12 | 32 | 30 | 300 | 24 | ≥40 | CN.. 1204.. |
| S40U TCLNR-12 | 40 | 37 | 350 | 30 | ≥50 | CN.. 1204.. |
| S40U TCLNL-12 | 40 | 37 | 350 | 30 | ≥50 | CN.. 1204.. |
| S40U TCLNR-16 | 40 | 37 | 350 | 30 | ≥44 | CN.. 1606.. |
| S40U TCLNL-16 | 40 | 37 | 350 | 30 | ≥44 | CN.. 1606.. |
| S50V TCLNR-12 | 50 | 47 | 400 | 38 | ≥63 | CN.. 1204.. |
| S50V TCLNL-12 | 50 | 47 | 400 | 38 | ≥63 | CN.. 1204.. |
| Boring Bar | TDUNR/L |
| Cutting Angle | 93° |
| Insert | DN.. |
| Main application | Profiling |
| Clamping | Claw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
Particularly suitable for roughing due to stable claw clamping.
| d | h | L | f | Dmin | Insert | |
| S25S TDUNR-11 | 25 | 23 | 250 | 19,5 | ≥33 | DNM. 1104.. |
| S25S TDUNL-11 | 25 | 23 | 250 | 19,5 | ≥33 | DNM. 1104.. |
| S32T TDUNR-11 | 32 | 30 | 300 | 24 | ≥40 |
DNM. 1104.. |
| S32T TDUNL-11 | 32 | 30 | 300 | 24 | ≥40 | DNM. 1104.. |
| S25S TDUNR-15 | 25 | 23 | 250 | 19,5 | ≥39 | DNM. 1506.. |
| S25S TDUNL-15 | 25 | 23 | 250 | 19,5 | ≥39 | DNM. 1506.. |
| S32T TDUNR-15 | 32 | 30 | 300 | 24 | ≥40 | DNM. 1506.. |
| S32T TDUNL-15 | 32 | 30 | 300 | 24 | ≥40 | DNM. 1506.. |
| S40U TDUNR-15 | 40 | 37 | 350 | 30 | ≥50 | DNM. 1506.. |
| S40U TDUNL-15 | 40 | 37 | 350 | 30 | ≥50 | DNM. 1506.. |
| Boring Bar | TWLNR/L |
| Cutting Angle | 95° |
| Insert | WN.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Claw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
Particularly suitable for roughing due to stable claw clamping.
| d | h | L | f | Dmin | Insert | |
| S20R TWLNR-06 | 20 | 18 | 200 | 15 | ≥26 | WNM. 0604.. |
| S20R TWLNL-06 | 20 | 18 | 200 | 15 | ≥26 | WNM. 0604.. |
| S25S TWLNR-06 | 25 | 23 | 250 | 19,5 | ≥36 | WNM. 0604.. |
| S25S TWLNL-06 | 25 | 23 | 250 | 19,5 | ≥36 | WNM. 0604.. |
| S232T TWLNR-06 | 32 | 30 | 300 | 24 | ≥44 | WNM. 0604.. |
| S232T TWLNL-06 | 32 | 30 | 300 | 24 | ≥44 | WNM. 0604.. |
| S25S TWLNR-08 | 25 | 23 | 250 | 19,5 | ≥38 | WNM. 0804.. |
| S25S TWLNL-08 | 25 | 23 | 250 | 19,5 | ≥38 | WNM. 0804.. |
| S32T TWLNR-08 | 32 | 30 | 300 | 24 | ≥44 |
WNM. 0804.. |
| S32T TWLNL-08 | 32 | 30 | 300 | 24 | ≥44 | WNM. 0804.. |
| S40U TWLNR-08 | 40 | 37 | 350 | 30 | ≥50 | WNM. 0804.. |
| S40U TWLNL-08 | 40 | 37 | 350 | 30 | ≥50 | WNM. 0804.. |
| Boring Bar | SDUCR/L |
| Cutting Angle | 93° |
| Insert | DC.. |
| Main application | Profiling |
| Clamping | Screw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | |
| S10K SDUCR/L 07 | 10 | 9 | 125 | 8 | ≥13 |
| S12K SDUCR/L 07 | 12 | 11 | 125 | 10 | ≥16 |
| S16x10M SDUCR/L 07 | 16 | 15 | 150 | 8 | ≥13 |
| S16x12M SDUCR/L 07 | 16 | 15 | 150 | 10 | ≥16 |
| S16P SDUCR/L 07 | 16 | 15 | 170 | 13 | ≥21 |
| S20R SDUCR/L 07 | 20 | 18 | 200 | 15 | ≥25 |
| S16P SDUCR/L 11 | 16 | 15 | 170 | 13 | ≥21 |
| S20R SDUCR/L 11 | 20 | 18 | 200 | 15 | ≥25 |
| S25S SDUCR/L 11 | 25 | 23 | 250 | 19,5 | ≥32 |
| S32T SDUCR/L 11 | 32 | 30 | 300 | 24 | ≥40 |
| Boring Bar | SDQCR/L |
| Cutting Angle | 107,5° |
| Insert | DC.. |
| Main application | Profiling |
| Clamping | Screw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| S12K SDQCR/L-07 | 12 | 11 | 125 | 10 | ≥16 | DCG./DCM. 07.. |
| S16P SDQCR/L-07 | 16 | 15 | 170 | 13 | ≥21 | DCG./DCM. 07.. |
| S16P SDQCR/L-11 |
16 | 15 | 170 | 13 | ≥21 | DCG./DCM. 11.. |
| S20R SDQCR/L-11 |
20 | 18 | 200 | 15 | ≥25 | DCG./DCM. 11.. |
| S25S SDQCR/L-11 |
25 | 23 | 250 | 19,5 | ≥32 | DCG./DCM. 11.. |
| Boring Bar | SCLCR/L |
| Cutting Angle | 95° |
| Insert | CC.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Screw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | L1 | f | Dmin | |
| S0608H SCLCR/L 06 | 8 | 7 | 100 | 25 | 05 | ≥8 |
| S08H SCLCR/L 06 | 8 | 7 | 100 | - | 07 | ≥11 |
| S10K SCLCR/L 06 | 10 | 9 | 125 | - | 08 | ≥13 |
| S12K SCLCR/L 06 | 12 | 11 | 125 | - | 10 | ≥16 |
| S16x10M SCLCR/L 06 | 16 | 15 | 150 | 35 | 10 | ≥16 |
| S16x12M SCLCR/L 06 | 16 | 15 | 150 | 35 | 10 | ≥16 |
| S12K SCLCR/L 09 | 12 | 11 | 125 | - | 10 | ≥16 |
| S16P SCLCR/L 09 | 16 | 15 | 170 | - | 13 | ≥21 |
| S20R SCLCR/L 09 | 20 | 18 | 200 | - | 15 | ≥25 |
| S25S SCLCR/L 09 | 25 | 23 | 250 | - | 19,5 | ≥32 |
| S32T SCLCR/L 09 | 32 | 30 | 300 | - | 24 | ≥40 |
| Boring Bar | SVQBR/L |
| Cutting Angle | 107,5° |
| Insert | VBMT 1103.../1604... |
| Main application | Profiling |
| Clamping | Screw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | |
| S16P SVQBR-11 | 16 | 15 | 170 | 13 | ≥21 |
| S16P SVQBL-11 | 16 | 15 | 170 | 13 | ≥21 |
| S20R SVQBR-11 | 20 | 18 | 200 | 15 | ≥25 |
| S20R SVQBL-11 | 20 | 18 | 200 | 15 | ≥25 |
| S25S SVQBR-16 | 25 | 23 | 250 | 19,5 | ≥32 |
| S25S SVQBL-16 | 25 | 23 | 250 | 19,5 | ≥32 |
| S32T SVQBR-16 | 32 | 30 | 300 | 24 | ≥40 |
| S32T SVQBL-16 | 32 | 30 | 300 | 24 | ≥40 |
| Boring Bar | E-SDQCR/L |
| Setting Angle | 107,5° |
| Insert | DC.. |
| Main application | Profile turning |
| Clamping | Screw Clamp |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
Solid carbide boring bar
Solid carbide tool carriers increase stability considerably.
The carbide boring bar allows a projection length of up to 6xD by reducing vibrations.
Precision and surface quality are also improved.
| d | L | f | D/min | |
| E10M SDQCR/L-07 with cooling holes | 10 | 150 | 8 | ≥13 |
| E12Q SDQCR/L-07 with cooling holes | 12 | 180 | 10 | ≥16 |
| E16R SDQCR/L-11 with cooling holes | 16 | 200 | 13 | ≥21 |
| Boring Bar | E-SCLCR/L |
| Setting Angle | 95° |
| Insert | CC.. |
| Main application | Longitudinal turning, facing |
| Clamping | Screw Clamp |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
Solid carbide boring bar
Solid carbide tool carriers increase stability considerably.
The carbide boring bar allows a projection length of up to 6xD by reducing vibrations.
Precision and surface quality are also improved.
| d | L | f | Dmin | |
| E08K SCLCR/L 06 with cooling holes | 8 | 125 | 06 | ≥11 |
| E10M SCLCR/L 06 with cooling holes | 10 | 150 | 08 | ≥13 |
| E12Q SCLCR/L 06 with cooling holes | 12 | 180 | 10 | ≥16 |
| E16R SCLCR/L 09 with cooling holes | 16 | 200 | 13 | ≥21 |
| Boring Bar | E-SDUCR/L |
| Setting Angle | 93° |
| Insert | DC.. |
| Main application | Profile turning |
| Clamping | Screw Clamp |
| Cooling | With internal coolant feed |
| Packaging unit | 1 Pc. |
Solid carbide boring bar
Solid carbide tool carriers increase stability considerably.
The carbide boring bar allows a projection length of up to 6xD by reducing vibrations.
Precision and surface quality are also improved.
| d | L | f | Dmin | |
| E10M SDUCR/L-07 | 10 | 150 | 8 | ≥13 |
| E12Q SDUCR/L-07 | 12 | 180 | 10 | ≥16 |
| E16R SDUCR/L-11 | 16 | 200 | 13 | ≥21 |
| E20S SDUCR/L-11 | 20 | 250 | 15 | ≥25 |
| Boring Bar | SVJBR/L |
| Cutting Angle | 93° |
| Insert | VBMT 1604... |
| Main application | Profiling |
| Clamping | Screw Clamping |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | |
| S25S SVJBR-16-S | 25 | 23 | 250 | 19,5 | ≥32 |
| S25S SVJBL-16-S | 25 | 23 | 250 | 19,5 | ≥32 |
| S32T SVJBR-16 | 32 | 30 | 300 | 24 | ≥40 |
| S32T SVJBL-16 | 32 | 30 | 300 | 24 | ≥40 |
| S40U SVJBR-16 | 40 | 37 | 350 | 30 | ≥50 |
| S40U SVJBL-16 | 40 | 37 | 350 | 30 | ≥50 |
English
Deutsch
