For chamfer mills, the various diameters and angles are always compatible with ISO inserts.
The standard program is extensive, ensuring that there is something for every application.
on orders over €150
Tel.: +49 (0)208 - 848 67 82
There are 9 products.
| Mill typ | Chamfer Mill |
| Insert | TC... |
| Winkel | 25° |
| Packaging unit | 1 Pc. |
D1°/D2° = 25°
| D1 | D2 | Z | L | l | d | Insert | |
| HF25 TCMT16.. D17~30 W16 L100 Z01 | 30 | 17 | 1 | 100 | 30 | 16 | TC 16... |
| Mill typ | Chamfer Mill |
| Insert | TC... |
| Winkel | 45° |
| Packaging unit | 1 Pc. |
D1°/D2° = 45°
| D1 | D2 | Z | L | l | d | Insert | |
| HF45 TC11.. D4~15 W16 L100 Z01 | 15 | 4 | 1 | 100 | 30 | 16 | TC. 11... |
| HF45 TC16.. D5~26 W16 L100 Z01 | 26 | 5 | 1 | 100 | 30 | 16 | TC. 16... |
| HF45 TC16.. D10~31 W20 L100 Z02 | 31 | 10 | 2 | 100 | 35 | 20 | TC. 16... |
| HF45 TC16.. D14~35 W20 L100 Z02 | 35 | 14 | 2 | 100 | 40 | 20 | TC. 16... |
| HF45 TC16.. D22~43 W25 L100 Z03 | 43 | 22 | 3 | 100 | 40 | 25 | TC. 16... |
| Mill typ | Chamfer Mill |
| Insert | TC... |
| Winkel | 62° |
| Packaging unit | 1 Pc. |
D1°/D2° = 62°
| D1 | D2 | Z | L | l | d | Insert | |
| HF62 TC16.. D14-40 W20 L100 Z03 | 40 | 14 | 3 | 100 | 40 | 20 | TC. 16... |
| Mill typ | Chamfer Mill |
| Insert | SPMG.. |
| Packaging unit | 1 Pc. |
D1°/D2° = 45°
| D2 | D1 | Z | L | l | d | |
| HF45 SP09 D11-25 W20 L150 Z01 | 11 | 25 | 1 | 150 | 30 | 20 |
| HF45 SP11 D24-38 W25 L150 Z02 | 24 | 38 | 2 | 150 | 35 | 25 |
| HF45 SP11 D31-45 W32 L150 Z03 | 31 | 45 | 3 | 150 | 40 | 32 |
| Mill Type | Solid Carbide Chamfer Mill |
| Angle | 60° |
| Workpiece Materials | Steel, Stainless Steel, Cast Iron, NF-Materials |
| Grade | RT303: PVD-coated fine-grain carbide for general Application in milling (VHM) |
| Packaging unit | 1 Pc. |
| d(h6) | L | D | Shank | X | Z | |
| FF-Z3-60-D3.0 RT303 | 3 | 48 | 0,2 | Cylindrical | 60° | 3 |
| FF-Z4-60-D4.0 RT303 | 4 | 48 | 0,2 | Cylindrical | 60° | 4 |
| FF-Z4-60-D6.0 RT303 | 6 | 55 | 0,2 |
Weldon |
60° | 4 |
| FF-Z4-60-D8.0 RT303 | 8 | 58 | 0,5 |
Weldon |
60° |
4 |
| FF-Z4-60-D10.0 RT303 | 10 | 65 | 0,5 |
Weldon |
60° |
4 |
| FF-Z6-60-D10.0 RT303 | 10 | 65 | 0,7 |
Weldon |
60° |
6 |
| FF-Z4-60-D12.0 RT303 | 12 | 75 | 0,5 |
Weldon |
60° | 4 |
| FF-Z6-60-D12.0 RT303 | 12 | 75 | 0,7 | Weldon | 60° | 6 |
| FF-Z4-60-D16.0 RT303 | 16 | 85 | 0,7 | Weldon | 60° | 4 |
| FF-Z6-60-D16.0 RT303 | 16 | 85 | 0,7 | Weldon | 60° | 6 |
| Mill Type | Solid Carbide Chamfer Mill |
| Angle | 90° |
| Workpiece Material | Steel, Stainless Steel, Cast Iron, NF-Materials |
| Shank | Weldon/Cylinder Shaft |
| Grade | RT303: PVD-coated fine-grain carbide for general Application in milling (VHM) |
| Packaging unit | 1 Pc. |
| d(h6) | L | D | Z | |
| FF-Z3-90-D3.0-Z RT303 | 3 | 48 | 0,2 | 3 |
| FF-Z4-90-D4.0-Z RT303 | 4 | 48 | 0,2 | 4 |
| FF-Z4-90-D6.0-Z RT303 | 6 | 55 | 0,2 | 4 |
| FF-Z4-90-D8.0-Z RT303 | 8 | 58 | 0,5 | 4 |
| FF-Z4-90-D10.0-Z RT303 | 10 | 65 | 0,5 | 4 |
| FF-Z4-90-D12.0-Z RT303 | 12 | 75 | 0,5 | 4 |
| FF-Z4-90-D16.0-Z RT303 | 16 | 85 | 0,7 | 4 |
Weldon-Shank
| d(h6) | L | D | Z | |
| FF-Z3-90-D3.0-W RT303 | 3 | 48 | 0,2 | 3 |
| FF-Z4-90-D4.0-W RT303 | 4 | 48 | 0,2 | 4 |
| FF-Z4-90-D6.0-W RT303 | 6 | 55 | 0,2 | 4 |
| FF-Z4-90-D8.0-W RT303 | 8 | 58 | 0,5 | 4 |
| FF-Z4-90-D10.0-W RT303 | 10 | 65 | 0,5 | 4 |
| FF-Z4-90-D12.0-W RT303 | 12 | 75 | 0,5 | 4 |
| FF-Z4-90-D16.0-W RT303 | 16 | 85 | 0,7 | 4 |
| Mill Type | Solid Carbide Chamfer Mill |
| Angle | 120° |
| Workpiece Material | Steel, Stainless Steel, Cast Iron, NF-Materials |
| Grade | RT303: PVD-coated fine-grain carbide for general Application in milling (VHM) |
| Packaging unit | 1 Pc. |
| d(h6) | L | D | Shank | X | Teeth | |
| FF-Z3-120-D3.0 RT303 | 3 | 48 | 0,2 | Cylindrical | 120° | 3 |
| FF-Z4-120-D4.0 RT303 | 4 | 48 | 0,2 | Cylindrical | 120° | 4 |
| FF-Z4-120-D6.0 RT303 | 6 | 55 | 0,2 |
Weldon |
120° | 4 |
| FF-Z4-120-D8.0 RT303 | 8 | 58 | 0,5 |
Weldon |
120° |
4 |
| FF-Z4-120-D10.0 RT303 | 10 | 65 | 0,5 |
Weldon |
120° |
4 |
| FF-Z4-120-D12.0 RT303 | 12 | 75 | 0,5 |
Weldon |
120° |
4 |
| FF-Z4-120-D16.0 RT303 | 16 | 85 | 0,7 |
Weldon |
120° | 4 |
| Tool Typ | Multifunction Tool |
| Angle | 45° |
| Applications | Spot Drilling - Engraving - Chamfering |
| Insert | SOMT |
| Packaging Unit | 1 Pc. |
| d | L | Dmax | Tmax | Insert | |
| S16H-45-SO11-L100 | 16 | 100 | 13 | 6,5 | SOMT 11... |
| S16H-45-SO11-L150 | 16 | 150 | 13 | 6,5 | SOMT 11... |
| Plate Shape | SOMT |
| Material | Steel, Stainless Steel, Cast Iron |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc |
| L | S | r | |
| SOMT 11T308-PM RT300 | 10,87 | 3,97 | 0,8 |
Deutsch
English