Error!

PCD-Inserts

PKD (polycrystalline diamond) turning inserts are made with a cutting edge from polycrystalline diamond. Polycrystalline diamond is synthesized in a high-pressure, high-temperature process, where small diamond crystals are bonded to form a strong, wear-resistant material.

PKD is one of the hardest materials overall, comparable to natural diamond. As a result, our PKD turning inserts are extremely wear-resistant and ideal for machining non-ferrous metals like fiberglass composites and aluminum.

PCD Insert C-CCGW RTD10 for Aluminum Turning | Rinaldi-Tools
Rinaldi-Tools GmbH

PCD-Insert - C-CCGW ...-1N RTD10

Price ab €31.90
Availability: 214748352 In Stock

Technical data

Shape C-CCGW
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic 
Packaging unit 2 Pc.

Dimensions

r L I.C S d
C-CCGW 060202-1N RTD10 0,2 2,5 6,35 2,38 2,8
C-CCGW 09T304-1N RTD10 0,4 2,5 9,525 3,97 4,4

High-performance PCD insert for excellent surface finishes

The PCD insert C-CCGW ...-1N RTD10 is specifically developed for the high-speed turning of aluminum alloys (up to 12% silicon), non-ferrous metals, and plastics. Its extremely hard cutting material made of polycrystalline diamond provides exceptional wear resistance, even in demanding abrasive machining tasks. The sturdy basic geometry ensures reliable and highly precise manufacturing processes, allowing you to consistently benefit from superior surface qualities and efficient machining cycles.

Advantages of PCD-Insert - C-CCGW ...-1N RTD10

  • Extremely high wear resistance due to polycrystalline diamond (PCD)
  • Convinces in high-speed aluminum turning with reliable cutting speeds
  • Creates favorable conditions for outstanding, dimensionally accurate surface finishes
  • Highly suitable for abrasive non-ferrous materials and various plastics
  • Supplied in a practical packaging unit of 2 pieces
CCGT 1N RTD10 PCD Insert for Aluminum Turning | Rinaldi-Tools
Rinaldi-Tools GmbH

PCD-Insert - CCGT ...-1N RTD10

Price ab €22.95
Availability: 222222216 In Stock

Technical data

Shape CCGT
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic
Packaging unit 2 Pc.

Dimensions

r L I.C S d
CCGT 060202-1N RTD10 0,2 2,5 6,35 2,38 2,8
CCGT 060204-1N RTD10 0,4 2,5 6,35 2,38 2,8
CCGT 09T302-1N RTD10 0,2 2,5 9,525 3,97 4,4
CCGT 09T304-1N RTD10 0,4 2,5 9,525 3,97 4,4
CCGT 09T308-1N RTD10 0,8 2,5 9,525 3,97 4,4

High-Precision PCD Insert CCGT ...-1N RTD10

The PCD insert CCGT ...-1N RTD10 is engineered for the high-speed turning of aluminum with up to 12% silicon content, non-ferrous metals, and plastics. Polycrystalline diamond (PCD) is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix, delivering exceptional wear resistance. ATTENTION! For aluminum with a low silicon content and soft materials with long chip formation, you must use this CCGT insert with a positive rake angle. ATTENTION! For abrasive materials such as aluminum with high silicon content, brass, brass alloys, brittle plastics, and glass-fiber reinforced materials, you need the CCGW insert.

Advantages of PCD-Insert CCGT ...-1N RTD10

  • Extremely hard PCD material ensures outstanding wear resistance
  • Positive rake angle supports efficient chip evacuation in soft materials
  • Creates excellent conditions for high-speed machining of non-ferrous metals
  • Supplied in a practical 2-piece packaging unit for professional applications
PCD-Insert CCGW ...-1N RTD10 Aluminum | Rinaldi-Tools
Rinaldi-Tools GmbH

PCD-Insert - CCGW ...-1N RTD10

Price ab €22.95
Availability: 214748364 In Stock

Technical data

Plate Shape CCGW
Processing High Speed Alu Turning
Material Aluminum, NF-Materials
Coating RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic 
Packaging unit 2 Pc.

Dimensions

r L I.C S d
CCGW 060202-1N RTD10 0,2 2,5 6,35 2,38 2,8
CCGW 060204-1N RTD10 0,4 2,5 6,35 2,38 2,8
CCGW 09T302-1N RTD10 0,2 2,5 9,525 3,97 4,4
CCGW 09T304-1N RTD10 0,4 2,5 9,525 3,97 4,4
CCGW 09T308-1N RTD10 0,8 2,5 9,525 3,97 4,4

High-performance PCD insert for demanding machining

The PCD-Insert CCGW ...-1N RTD10 is engineered for high-speed aluminum turning. PCD (Polycrystalline diamond) is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix. This structure provides exceptional wear resistance.

ATTENTION! For abrasive materials such as aluminum with a high silicon content, brass and brass alloys, as well as brittle plastics and glass-fiber reinforced materials, you need the CCGW insert.

ATTENTION! For aluminum with a low silicon content and soft materials with long chip formation, you need the CCGT insert with a positive rake angle.

Advantages of PCD-Insert - CCGW ...-1N RTD10

  • Extremely hard cutting edge due to specialized PCD structure
  • Optimized for high-speed machining of aluminum up to 12% Si
  • Delivers precise results when turning non-ferrous metals and plastics
  • Reliably handles abrasive and glass-fiber reinforced materials
  • Supplied in a practical 2-piece packaging unit for professional use
PCD-Insert DCGT ...-1N RTD10 for Aluminum | Rinaldi-Tools
Rinaldi-Tools GmbH

PCD-Insert - DCGT ...-1N RTD10

Price ab €22.95
Availability: 2147483635 In Stock

Technical data

Shape DCGT
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic 
Packaging unit 2 Pc.

Dimensions

r L I.C S d
DCGT 070202-1N RTD10 0,2 2,5 6,35 2,38 2,8
DCGT 070204-1N RTD10 0,4 2,5 6,35 2,38 2,8
DCGT 11T302-1N RTD10 0,2 2,5 9,525 3,97 4,4
DCGT 11T304-1N RTD10 0,4 2,5 9,525 3,97 4,4
DCGT 11T308-1N RTD10 0,8 2,5 9,525 3,97 4,4

High-Precision PCD Machining for Aluminum and NF-Materials

The PCD insert DCGT ...-1N RTD10 is specifically engineered for high-speed aluminum turning. Polycrystalline diamond (PCD) is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix. Attention: For aluminum with a low silicon content and soft materials with long chip formation, you need this DCGT insert with a positive rake angle. For abrasive materials such as aluminum with a high silicon content, brass and brass alloys, as well as brittle plastics and fiberglass-reinforced materials, you absolutely need the DCGW insert!

Advantages of PCD-Insert DCGT

  • Convinces with high wear resistance during high-speed turning
  • Extremely hard PCD material for economical machining processes
  • Positive rake angle ideally supports the processing of soft materials
  • Practical solution for clean surface finishes on aluminum up to 12% Si
  • Supplied in a convenient 2-piece packaging unit for secure stocking
DCGW ...-1N RTD10 PCD-Insert for Aluminum | Rinaldi-Tools
Rinaldi-Tools GmbH

PCD-Insert - DCGW ...-1N RTD10

Price ab €22.95
Availability: 214748356 In Stock

Technical data

Shape DCGW
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic
Packaging unit 2 Pc.

Dimensions

r L I.C S d
DCGW 070202-1N RTD10 0,2 2,5 6,35 2,38 2,8
DCGW 070204-1N RTD10 0,4 2,5 6,35 2,38 2,8
DCGW 11T302-1N RTD10 0,2 2,5 9,525 3,97 4,4
DCGW 11T304-1N RTD10 0,4 2,5 9,525 3,97 4,4
DCGW 11T308-1N RTD10 0,8 2,5 9,525 3,97 4,4

High-speed turning for abrasive materials

The PCD-Insert DCGW ...-1N RTD10 provides an excellent foundation for demanding turning operations. Polycrystalline diamond (PCD) is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix. This specific DCGW shape is highly recommended for abrasive workpiece materials such as aluminum with high silicon content (up to 12% Si), brass, brittle plastics, and glass-fiber reinforced materials. For non-abrasive aluminum with low silicon content or soft materials producing long chips, a DCGT insert with a positive rake angle is required. The tools are supplied in a convenient packaging unit of 2 pieces.

Advantages of the PCD-Insert

  • Extremely hard cutting edge based on randomly oriented polycrystalline diamond
  • Designed for highly efficient high-speed aluminum turning
  • Provides a reliable solution for abrasive non-ferrous metals and plastics
  • Practical packaging unit of 2 pieces to support professional workflows
VBGT 1N RTD10 – PCD Insert for Aluminum Machining | Rinaldi-Tools
Rinaldi-Tools GmbH

PCD-Insert - VBGT ...-1N RTD10

Price ab €22.95
Availability: 214748358 In Stock

Technical data

Shape VBGT
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic
Packaging unit 2 Pc.

Dimensions

r L I.C S d
VBGT 160402-1N RTD10 0,2 2,5 9,525 4,76 4,4
VBGT 160404-1N RTD10 0,4 2,5 9,525 4,76 4,4
VBGT 160408-1N RTD10 0,8 2,5 9,525 4,76 4,4

PCD Insert for Aluminum and Non-Ferrous Metals

The VBGT ...-1N RTD10 is a turning insert equipped with polycrystalline diamond (PCD), specifically designed for high-speed machining. PCD is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix, providing exceptional wear resistance.

ATTENTION! For aluminum with a low silicon content (up to 12% Si) and soft materials with long chip formation, you require this specific VBGT insert with a positive rake angle.
ATTENTION! For abrasive materials such as high-silicon aluminum, brass, brass alloys, brittle plastics, and fiberglass-reinforced materials, you must use the VBGW insert instead.

Advantages of VBGT ...-1N RTD10

  • Optimized for high-speed turning of aluminum up to 12% Si and NF-materials
  • Extremely hard PCD cutting material promotes very long tool life
  • Positive rake angle supports controlled chip formation in soft materials
  • Creates excellent conditions for demanding surface finishes
PCD Turning Insert VBGW RTD10 | Rinaldi-Tools
Rinaldi-Tools GmbH

VBGW ...-1N RTD10 PCD-Insert

Price ab €22.95
Availability: 214748364 In Stock

Technical data

Plate Shape VBGW
Processing High Speed Alu Turning
Material Aluminum, NF-Materials
Coating RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic 
Packaging unit 2 Pc.

Dimensions

r L I.C S d
VBGW 160402-1N RTD10 0,2 2,5 9,525 4,76 4,4
VBGW 160404-1N RTD10 0,4 2,5 9,525 4,76 4,4
VBGW 160408-1N RTD10 0,8 2,5 9,525 4,76 4,4

PCD turning insert VBGW for high-speed machining

The VBGW ...-1N RTD10 PCD-Insert is a specialized solution designed for high-speed aluminum turning. Polycrystalline diamond (PCD) is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix. This provides excellent wear resistance when machining non-ferrous materials and plastics. Important application note: For abrasive materials such as aluminum with a high silicon content, brass and brass alloys as well as brittle plastics and glass-fiber reinforced materials, you need this VBGW turning insert. For aluminum with a low silicon content and soft materials with long chip formation, you need the VBGT turning insert with a positive rake angle.

Advantages of the VBGW ...-1N RTD10 PCD-Insert

  • Extremely hard PCD cutting edge for high dimensional accuracy
  • Optimized for high-speed turning of aluminum (up to 12% silicon)
  • Specifically designed for abrasive materials, GRP and brass
  • Reliable performance for non-ferrous metals and various plastics
  • Supplied in a convenient packaging unit of 2 pieces
PCD-Insert VCGT 1N RTD10 for Aluminum | Rinaldi-Tools
Rinaldi-Tools GmbH

PCD-Insert - VCGT ...-1N RTD10

Price ab €22.95
Availability: 2147483596 In Stock

Technical data

Shape VCGT
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic 
Packaging unit 2 Pc.

Dimensions

r L I.C S d
VCGT 110302-1N RTD10 0,2 2,5 6,35 3,18 2,8
VCGT 110304-1N RTD10 0,4 2,5 6,35 3,18 2,8
VCGT 160402-1N RTD10 0,2 2,5 9,525 4,76 4,4
VCGT 160404-1N RTD10 0,4 2,5 9,525 4,76 4,4
VCGT 160408-1N RTD10 0,8 2,5 9,525 4,76 4,4

High-precision PCD insert for aluminum machining

The PCD-Insert VCGT ...-1N RTD10 by Rinaldi-Tools is a highly specialized solution for high-speed turning of aluminum (up to 12% Si), non-ferrous metals, and plastics. The cutting edge made of polycrystalline diamond (PCD) provides extreme hardness and wear resistance. ATTENTION: For aluminum with a low silicon content and soft materials with long chip formation, you must use this VCGT insert with a positive rake angle. For abrasive materials like aluminum with a high silicon content, brass, or glass-fiber reinforced plastics, you need the VCGW insert instead.

Advantages of PCD-Insert VCGT ...-1N RTD10

  • Specifically optimized for high-speed aluminum turning to support efficient workflows
  • Positive rake angle aids the reliable machining of soft, long-chipping materials
  • High wear resistance due to the synthetically produced PCD cutting edge
  • Provides a solid foundation for achieving excellent surface finishes on complex contours
PCD-Insert VCGW 1N RTD10 for Aluminum Turning | Rinaldi-Tools
Rinaldi-Tools GmbH

PCD-Insert - VCGW ...-1N RTD10

Price ab €22.95
Availability: 222222216 In Stock

Technical data

Shape VCGW
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic 
Packaging unit 2 Pc.

Dimensions

r L I.C S d
VCGW 110302-1N RTD10 0,2 2,5 6,35 3,18 2,8
VCGW 110304-1N RTD10 0,4 2,5 6,35 3,18 2,8
VCGW 160401-1N RTD10 0,1 2,5 9,525 4,76 4,4
VCGW 160402-1N RTD10 0,2 2,5 9,525 4,76 4,4
VCGW 160404-1N RTD10 0,4 2,5 9,525 4,76 4,4
VCGW 160408-1N RTD10 0,8 2,5 9,525 4,76 4,4

Designed for demanding high-speed aluminum turning

The PCD-Insert VCGW ...-1N RTD10 is specifically engineered for machining abrasive materials. Polycrystalline diamond (PCD) offers outstanding wear resistance when turning high-silicon aluminum, brass, and fiber-reinforced plastics. Please note: This VCGW version is the right choice for abrasive workpieces. For low-silicon aluminum or soft materials producing long chips, we recommend using the VCGT geometry.

Advantages of PCD-Insert - VCGW ...-1N RTD10

  • Extremely hard PCD material ensures prolonged tool life
  • Delivers efficient performance in high-speed turning applications
  • Practical solution for high-silicon aluminum and fiberglass reinforced plastics
  • Supports reliable processes when machining abrasive non-ferrous metals