| Grooving Insert | RTGN... RT300 |
| Workpiece Materials | Steel |
| Grade | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| d | L | r | |
| RTGN 2202-C RT300 | 2,2 | 19,8 | 0,2 |
| Item Nr. | d | L | r | |
| RTGN 2202-C RT300 | 1331030 | 2,2 | 19,8 | 0,2 |
| Steel | ||
| Vc (m/min) | fz (mm) | |
| RTGN 2202-C RT300 | 80-140 | 0,05-0,22 |
Data sheet
| Grooving Insert | RTGN... RT300 |
| Workpiece Materials | Steel |
| Grade | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| d | L | r | |
| RTGN 2202-C RT300 | 2,2 | 19,8 | 0,2 |
| Grooving Insert | TDN |
| Workpiece Materials | Steel/Cast Iron |
| Grade | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and cast iron |
| Packaging unit | 10 Pc. |
Stable cutting edge, grooving even with interrupted cuts
| B | r | L | S | |
| TDN-2002 RT300 | 2 | 0,2 | 20 | 4,0 |
| TDN-3002 RT300 | 3 | 0,2 | 20 | 4,1 |
| Grooving Insert | TDP |
| Workpiece Materials | Steel/Stainless Steel |
| Grade | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
Soft-cutting geometry, grooving and parting off
| B | R | L | S | |
| TDP-2002 RT300 | 2 | 0,2 | 20 | 3,9 |
| TDP-3002 RT300 | 3 | 0,2 | 20 | 4,0 |
| Grooving Insert | TDY |
| Workpiece Materials | Steel/Stainless Steel |
| Grade | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| B | R | L | S | |
| TDY-2E-R1.0 RT300 |
2 | 1 | 16 | 3,5 |
| TDY-3E-R1.5 RT300 |
3 | 1,5 | 21 | 4,8 |
| Grooving Insert | N151-UN |
| Workpiece Materials | Steel and Stainless Steel |
| Grooving System | N151-System |
| Coating | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| W | b | r | |
| N151-300-UN RT300 | 3,0 | 2,5 | 0,25 |
| N151-400-UN RT300 | 4,0 | 3,3 | 0,25 |
| Grooving Insert | TDPL |
| Workpiece Materials | Steel & Stainless Steel |
| Grade | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
Soft-cutting geometry for parting off
| B | R | L | S | α° | |
| TDPL-2002-6 RT300 | 2 | 0,2 | 20 | 3,5 | 6° |
| TDPL-2002-15 RT300 | 2 | 0,2 | 20 | 3,5 | 15° |
| TDPL-3002-8 RT300 | 3 | 0,2 | 20 | 4,8 | 8° |
| Grooving Insert | RTGN... RT300 |
| Workpiece Materials | Steel |
| Grade | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| d | L | r | |
| RTGN 3102-C RT300 | 3,10 | 20,00 | 0,20 |
| Grooving Insert | TDPR |
| Workpiece Materials | Steel & Stainless Steel |
| Grade | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
Soft-cutting geometry for parting off
| B | r | L | S | α | |
| TDPR-2002-6 RT300 | 2 | 0,2 | 20 | 3,9 | 6° |
| TDPR-2002-15 RT300 | 2 | 0,2 | 20 | 3,9 | 15° |
| TDPR-3002-8 RT300 | 3 | 0,2 | 20 | 4,1 | 8° |
Deutsch
English