| Tap Typ | HSS-E |
| Hole | Trough Hole |
| Thread | Imperial |
| Materials | Steel, Cast Iron and NF-Materials |
| Flank Angle | 55° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-E |
| Hole | Trough Hole |
| Thread | Imperial |
| Materials | Steel, Cast Iron and NF-Materials |
| Flank Angle | 55° |
| Packaging unit | 1 Pc. |
| Art. Nr.: | Thread/D | L2 | L | L4 | d | Z | K | Kl | Core Ø | |
| GB-D-G1/8-HSS-E | 3301261 | G1/8 | 20,0 | 90 | 36 | 7,0 | 3 | 5,5 | 8 | 8,8 |
| GB-D-G1/4-HSS-E | 3301262 | G1/4 | 22,0 | 100 | 40 | 11,0 | 3 | 9 | 12 | 11,8 |
| GB-D-G3/8-HSS-E | 3301263 | G3/8 | 22,0 | 100 | 40 | 12,0 | 3 | 9 | 12 | 15,25 |
| GB-D-G1/2-HSS-E | 3301264 | G1/2 | 25,0 | 125 | 50 | 16,0 | 4 | 12 | 15 | 19 |
| GB-D-G3/4-HSS-E | 3301265 | G3/4 | 28,0 | 140 | 54 | 20,0 | 4 | 16 | 19 | 24,5 |
| GB-D-G1-HSS-E | 3301266 | G1 | 30,0 | 160 | 60 | 25,0 | 4 | 20 | 23 | 30,75 |
| Workpiece Material | Tensile strength | Cutting Speed |
| (N/mm²) | Vc (m/min) | |
| Structural Steel | <450 | 10-20 |
| Tempered Steel | 450-700 | 10-15 |
| Cast Iron | <1100 | 5-15 |
| Aluminum wrought alloys | - | 10-15 |
| Aluminum cast alloys (<12% Si.) | <600 | 10-20 |
| Copper/Brass | <850 | 8-35 |
Data sheet
| Tap Typ | HSS-E |
| Hole | Trough Hole |
| Thread | Imperial |
| Materials | Steel, Cast Iron and NF-Materials |
| Flank Angle | 55° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-E-TiN |
| Hole | Blind Hole |
| Thread | Metric |
| Length | Jobber |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Type | HSS-E |
| Hole | Blind Hole |
| Thread | Metric, Fine Thread |
| Materials | Steel, Stainless steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc |
| Tap Typ | HSS-E |
| Hole | Trough Hole |
| Thread | Metric, Fine Thread |
| Materials | Steel, Stainless steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-PM |
| Hole | Trough Hole |
| Thread | Metric |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Type | HSS-E |
| Hole | Blind Hole |
| Thread | Metric |
| Workpiece Materials | Steel, Stainless Steel, Cast Iron, NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| D | P | L2 | L | L4 | d | K | Kl | Z | |
| GB-S-ISO-M3-HSS-E-TIN | M3 | 0,5 | 6 | 56 | 18 | 3,5 | 2,7 | 6 | 3 |
| GB-S-ISO-M4-HSS-E-TIN | M4 | 0,7 | 7 | 63 | 21 | 4,5 | 3,4 | 6 | 3 |
| GB-S-ISO-M5-HSS-E-TIN | M5 | 0,8 | 8 | 70 | 25 | 6 | 4,9 | 8 | 3 |
| GB-S-ISO-M6-HSS-E-TIN | M6 | 1 | 10 | 80 | 30 | 6 | 4,9 | 8 | 3 |
| GB-S-ISO-M8-HSS-E-TIN | M8 | 1,25 | 13 | 90 | 35 | 8 | 6,2 | 9 | 3 |
| GB-S-ISO-M10-HSS-E-TIN | M10 | 1,5 | 15 | 100 | 39 | 10 | 8 | 11 | 3 |
| GB-S-ISO-M12-HSS-E-TIN | M12 | 1,75 | 18 | 110 | 44 | 9 | 7 | 10 | 3 |
| GB-S-ISO-M16-HSS-E-TIN | M16 | 2 | 20 | 110 | 44 | 12 | 9 | 12 | 3 |
| GB-S-ISO-M20-HSS-E-TIN | M20 | 2,5 | 25 | 140 | 54 | 16 | 12 | 15 | 4 |
| GB-S-ISO-M24-HSS-E-TIN | M24 | 3 | 30 | 160 | 60 | 18 | 14.5 | 17 | 4 |
| GB-S-ISO-M30-HSS-E-TIN | M30 | 3,5 | 35 | 180 | 70 | 22 | 18 | 21 | 4 |
| Tap Typ | HSS-E |
| Hole | Blind hole |
| Thread | Metric |
| Materials | NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-PM |
| Hole | Trough Hole |
| Thread | Metric, Fine Thread |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Type | HSS-PM |
| Hole | Blind Hole |
| Thread | Metric |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-E-TiN |
| Hole | Trough Hole |
| Thread | Metric |
| Length | Jobber |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-E |
| Hole | Trough Hole |
| Thread | Metric |
| Materials | Steel, Stainless Steel, Cast Iron, NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-E |
| Hole | Through hole |
| Thread | Metric |
| Materials | NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-PM |
| Hole | Blind Hole |
| Thread | Metric, Fine thread |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-E |
| Hole | Blind Hole |
| Thread | Imperial |
| Materials | Steel and Stainless Steel |
| Flank Angle | 55° |
| Packaging unit | 1 Pc. |
Deutsch
English