Error!

  • -€0.90
  • New
VHM Aluminum End Mill - Prisma-Line | Rinaldi-Tools
VHM Aluminum End Mill - Prisma-Line | Rinaldi-Tools
    VHM Aluminum End Mill - Prisma-Line | Rinaldi-Tools
    VHM Aluminum End Mill - Prisma-Line | Rinaldi-Tools

Solid Carbide End Mill for Aluminum - 10% Discount Promotion

€9.90
€9.00 Save €0.90
Tax excluded
Diameter
Quantity

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 35°
Workpiece Material NF-Materials
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 3
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen    

 

- 3-Flute Solid Carbide End Mill 
- Centre Cutting

  D d H L Z Version
AF-P-Z3-D3.0 RT30K 3 4 9 50 3 A
AF-P-Z3-D4.0 RT30K 4 6 10 50 3 A
AF-P-Z3-D5.0 RT30K 5 6 13 50 3 A
AF-P-Z3-D8.0 RT30K 8 8 20 60 3 B
AF-P-Z3-D10.0 RT30K 10 10 25 75 3 B
AF-P-Z3-D20.0 RT30K 20 20 45 100 3 B

 Eckfräsen    

 

- 3-Flute Solid Carbide End Mill 
- Centre Cutting

  Item Nr.:
Single cutter		 D d H L Z Version
AF-P-Z3-D3.0 RT30K P2552398 3 4 9 50 3 A
AF-P-Z3-D4.0 RT30K P2552399 4 6 10 50 3 A
AF-P-Z3-D5.0 RT30K P2552400 5 6 13 50 3 A
AF-P-Z3-D8.0 RT30K P2552402 8 8 20 60 3 B
AF-P-Z3-D10.0 RT30K P2552403 10 10 25 75 3 B
AF-P-Z3-D20.0 RT30K P2552406 20 20 45 100 3 B

Cutting Data

Workpiece Material Tensile Strenth Cutting Speed Feed fz (mm/z)
(N/mm²) Ae Vc (m/min) Ø 3-5 Ø 6-8 Ø 10 Ø 12-16 Ø 20
Aluminum/Aluminum-alloys (<12% Si.) <600 1/1 300-450 0,04 0,05 0,08 0,11 0,18
1/2 400-600 0,05 0,07 0,1 0,14 0,23
1/10 450-750 0,08 0,11 0,16 0,23 0,36

Copper/Brass

 <850

 1/1 150-230 0,04 0,05 0,08 0,11 0,23
1/2 150-250 0,05 0,07 0,1 0,14 0,23
1/10 200-300 0,08 0,11 0,16 0,23 0,36
Non-metallic materials - 1/1 300-500 0,04 0,05 0,08 0,11 0,18
1/2 400-550 0,05 0,07 0,08 0,14 0,23
1/10 450-700 0,08 0,11 0,16 0,23 0,36

Rinaldi-Tools GmbH
P2552398

Data sheet

Materials
NF-Metals
Solid carbide Mills
End Mill

16 other products in the same category:

HM HPC End Mill Extra Long Shank - Prisma-Line | Rinaldi-Tools
  • -€1.50
  • New
Rinaldi-Tools GmbH

Solid Carbide HPC-End Mill - Extra Long Shank - 10% Discount Promotion

Regular price €16.00 Price ab €14.50 -€1.50
Availability: 10000 In Stock

Mill Type Solid Carbide End Mill 
Helix Angle 35°/38°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Roughing and Finish
Lenght Extra Long Shank
Shank Cylindrical Shank
Flutes 4
Grade RT405: PVD-TiAlN-coated high-performance grade
for solid carbide milling cutters
Packaging unit 1 Pc 

 Eckfräsen    

   

- 4-Flute Solid Carbide High Performance Cutter 
- Centre Cutting
- TiAlN-coated
- Roughing/Finishing

D d H L Z
HPCEL-P-Z4-D6.0 RT405
 6 6 16
 100 4
HPCEL-P-Z4-D8.0 RT405
 8 8 20 100 4
HPCEL-P-Z4-D12.0 RT405
 12 12 30 150 4

Solid Carbide End Mill for Aluminum - Extra Long Shank - 10% Discount Promotion
  • -€1.70
  • New
Rinaldi-Tools GmbH

Solid Carbide End Mill for Aluminum - Extra Long Shank - 10% Discount Promotion

Regular price €18.20 Price ab €16.50 -€1.70
Availability: 10000 In Stock

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 35°
Workpiece Material NF-Materials
Lenght Extra Long Shank
Shank Cylindrical Shank
Flutes 3
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc 

  Eckfräsen    

 

- 3-Flute Solid Carbide Milling Cutter 
- Centre Cutting
- For Aluminum and NF-Materials

D d(h6) H L Z
AFEL-P-Z3-D6.0 RT30K
 6 6 16 100 3
AFEL-P-Z3-D8.0 RT30K
 8 8 20 100 3
AFEL-P-Z3-D10.0 RT30K
 10 10 25 150 3
AFEL-P-Z3-D12.0 RT30K
 12 12 30 150 3

VHM Hard End Mill 68 HRC Long Version - Prisma-Line | Rinaldi-Tools
  • -€1.80
  • New
Rinaldi-Tools GmbH

Solid Carbide Ball Nose Hard Cutter up to 68 HRC - Long Version - 10% Discount Promotion

Regular price €19.70 Price ab €17.90 -€1.80
Availability: 10000 In Stock

Mill Type Solid Carbide Ball Nose Hard Cutter
Helix Angle 35°
Workpiece Material Hard Materials up to 68 HRC
Lenght Long Version
Shank Cylindrical Shank
Flutes 2
Grade RT555: PVD-coated carbide substrate for the
Hard machining of steel (up to HRC 55-68).
Highest wear resistance and toughness
Packaging unit 1 Pc.

 Eckfräsen    

 

- 2-Flute Solid Carbide Ball Nose Cutter 
- Centre Cutting
- PVD-coated 

D r d(h6) H L Z Version
HKFL-P-Z2-D2.0 RT555 2 1 6 4 75 2 A
HKFL-P-Z2-D2.5 RT555
 2,5 1,25 6 6 75 2 A
HKFL-P-Z2-D3.0 RT555
 3 1,5 6 6 75 2 A
HKFL-P-Z2-D3.5 RT555
 3,5 1,75 6 8 75 2 A
HKFL-P-Z2-D4.0 RT555
 4 2 6 8 75 2 A
HKFL-P-Z2-D5.0 RT555
 5 2,5 6 10 75 2 A
HKFL-P-Z2-D6.0 RT555
 6 3 6 12 75 2 B
HKFL-P-Z2-D8.0 RT555
 8 4 8 16 75 2 B
HKFL-P-Z2-D10.0 RT555
 10 5 10 20 100 2 B
HKFL-P-Z2-D12.0 RT555
 12 6 12 24 100 2 B
HKFL-P-Z2-D16.0 RT555
 16 8 16 32 150 2 B
HKFL-P-Z2-D20.0 RT555
 20 10 20 40 150 2 B

VHM Aluminum End Mill DLC - Prisma-Line | Rinaldi-Tools
  • -€1.10
  • New
Rinaldi-Tools GmbH

Solid Carbide End Mill for Aluminum (DLC) - 10% Discount Promotion

Regular price €12.10 Price ab €11.00 -€1.10
Availability: 10000 In Stock

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 35°
Workpiece Material Non-Ferrous Metals
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 3
Grade RT107: The DLC coating (Diamond-Like Carbon) ensures higher wear resistance.
Packaging unit 1 Pc 

 Eckfräsen    

 

- 3-Flute Solid Carbide End Mill 
- Centre Cutting

  D d H L Z Version
AF-P-Z3-D4.0 RT107 4 6 10 50 3 A
AF-P-Z3-D5.0 RT107 5 6 13 50 3 A
AF-P-Z3-D6.0 RT107 6 6 16 50 3 B
AF-P-Z3-D8.0 RT107 8 8 20 60 3 B
AF-P-Z3-D10.0 RT107 10 10 25 75 3 B
AF-P-Z3-D12.0 RT107 12 12 30 75 3 B

VHM Hard Ball Nose End Mill 68 HRC - Prisma-Line | Rinaldi-Tools
  • -€1.50
  • New
Rinaldi-Tools GmbH

Solid Carbide Ball Nose Hard Milling Cutter up to 68 HRC - 10% Discount Promotion

Regular price €16.40 Price ab €14.90 -€1.50
Availability: 10000 In Stock

Mill Type Solid Carbide Ball Nose Hard Milling Cutter
Helix Angle 35°
Workpiece Material Hard Materials up to 68 HRC
Lenght Standard Length
Shank Cylindrical Shank
Flutes 2
Grade RT555: PVD-coated carbide substrate for the
Hard machining of steel (up to HRC 55-68).
Highest wear resistance and toughness
Packaging unit 1 Pc. 

 Eckfräsen    

 

- 2-Flute Solid Carbide Ball Nose Hard Milling Cutter  
- Centre Cutting
- PVD-Coated 

r D d(h6) H L Z Version
HKF-P-Z2-D1.5 RT555 0,75 1,5 4 3 50 2 A
HKF-P-Z2-D2.0 RT555 1 2 6 4 50 2 A
HKF-P-Z2-D2.5 RT555
 1,25 2,5 6 5 50 2 A
HKF-P-Z2-D3.0 RT555
 1,5 3 6 6 50 2 A
HKF-P-Z2-D3.5 RT555 1,75 3,5 6 8 50 2 A
HKF-P-Z2-D4.0 RT555
 2 4,0 6 8 50 2 A
HKF-P-Z2-D5.0 RT555
 2,5 5,0 6 10 50 2 A
HKF-P-Z2-D6.0 RT555
 3 6 6 12 50 2 B
HKF-P-Z2-D8.0 RT555
 4 8 8 16 60 2 B
HKF-P-Z2-D10.0 RT555
 5 10 10 20 75 2 B
HKF-P-Z2-D12.0 RT555
 6 12 12 24 75 2 B
HKF-P-Z2-D16.0 RT555
 8 16 16 32 100 2 B
HKF-P-Z2-D20.0 RT555
 10 20 20 40 100 2 B

Solid Carbide End Mill - Weldon - 10% Discount Promotion
  • -€1.00
  • New
Rinaldi-Tools GmbH

Solid Carbide End Mill - Weldon - 10% Discount Promotion

Regular price €10.50 Price ab €9.50 -€1.00
Availability: 10000 In Stock

Mill Type Solid Carbide End Mill 
Helix Angle 38°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Finish
Lenght Standard Length
Shank Weldon-Shank
Flutes 4
Grade RT405: PVD-TIALN-coated high-performance grade
for solid carbide milling cutters
Packaging unit 1 Pc. 

  Eckfräsen    

  

- 4 flute solid carbide cutter 
- Centre Cutting
- TIALN-coated

D d(h6) H L Z Version
SF-P-Z4-D3.0-W RT405
 3 6 8 50 4 A
SF-P-Z4-D4.0-W RT405
 4 6 11 50 4 A
SF-P-Z4-D5.0-W RT405
 5 6 13 50 4 A
SF-P-Z4-D10.0-W RT405
 10 10 25 75 4 B
VHM HPC End Mill Stainless Steel - Prisma-Line | Rinaldi Tools
  • -€1.30
  • New
Rinaldi-Tools GmbH

Solid Carbide HPC End Mill for Stainless Steel - 10% Discount Promotion

Regular price €14.30 Price ab €13.00 -€1.30
Availability: 9997 In Stock

Mill Type Solid Carbide HPC End Mill
Helix Angle 36/38°
Workpiece Material Stainless Steel
Lenght Standard Lenght
Shank Weldon Shank
Flutes 4
Grade RT350: PVD-coated M15-M30 and S15-S30 solid carbide for roughing and finishing of stainless steel.
Packaging unit 1 Pc 

 Eckfräsen    

 

- 4-Flute Solid Carbide End Mill
- Centre Cutting

  D d H L Z Version
SFVA-P-Z4-D4.0-W RT350
 4 6 11 50 4 A
SFVA-P-Z4-D5.0-W RT350
 5 6 13 50 4 A
SFVA-P-Z4-D6.0-W RT350
 6 6 16 50 4 B
SFVA-P-Z4-D8.0-W RT350
 8 8 20 60 4 B
SFVA-P-Z4-D10.0-W RT350
 10 10 25 75 4 B
SFVA-P-Z4-D12.0-W RT350
 12 12 26 75 4 B
SFVA-P-Z4-D16.0-W RT350
 16 16 40 100 4 B

VHM Ball Nose End Mill 4 Flutes - Prisma-Line | Rinaldi-Tools
  • -€1.30
  • New
Rinaldi-Tools GmbH

Solid Carbide Ball Nose Cutter - 4 Flutes - 10% Discount Promotion

Regular price €12.90 Price ab €11.60 -€1.30
Availability: 10000 In Stock

Mill Type Solid Carbide Ball Nose Cutter
Helix Angle 30°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Finish
Lenght Standard Length
Shank Cylindrical Shank
Flutes 4
Grade RT303: PVD-coated fine-grain carbide for general Application in milling (VHM)
Packaging unit 1 Pc.

 Eckfräsen    

   

- 4-Flute Solid Carbide Ball Nose Cutter 
- Centre Cutting
- PVD-Coated

D r d(h6) H L Z Version
KF-P-Z4-D4.0 RT303
 4 2 6 8 50 4 A
KF-P-Z4-D5.0 RT303
 5 2,5 6 10 50 4 A
KF-P-Z4-D6.0 RT303
 6 3 6 12 50 4 B
KF-P-Z4-D8.0 RT303
 8 4 8 16 60 4 B
KF-P-Z4-D10.0 RT303
 10 5 10 20 75 4 B
KF-P-Z4-D12.0 RT303
 12 6 12 24 75 4 B

VHM Hard End Mill 68 HRC - Prisma-Line | Rinaldi-Tools
  • -€1.50
  • New
Rinaldi-Tools GmbH

Solid Carbide Hard Milling Cutter up to 68 HRC - 10% Discount Promotion

Regular price €14.90 Price ab €13.40 -€1.50
Availability: 10000 In Stock
Mill Type Solid Carbide Hard Milling Cutter
Helix Angle 45°
Workpiece Material Hard Materials up to 68 HRC
Lenght Standard Length
Shank Cylindrical Shank
Flutes 4
Grade RT555: PVD-coated carbide substrate for the
Hard machining of steel (up to HRC 55-68).
Highest wear resistance and toughness
Packaging unit 1 Pc

 Eckfräsen 

 

- 4-Flute Solid Carbide Hard Milling Cutter 
- Centre Cutting
- PVD-Coated

D d(h6) H L Z Version
HF-P-Z4-D1.0 RT555 1 6 3 50 4 A
HF-P-Z4-D2.0 RT555
 2 6 6 50 4 A
HF-P-Z4-D3.0 RT555
 3 6 8 50 4 A
HF-P-Z4-D3.5 RT555 3,5 6 10 50 4 A
HF-P-Z4-D4.0 RT555
 4 6 11 50 4 A
HF-P-Z4-D5.0 RT555
 5 6 13 50 4 A
HF-P-Z4-D6.0 RT555
 6 6 16 50 4 B
HF-P-Z4-D8.0 RT555
 8 8 20 60 4 B
HF-P-Z4-D10.0 RT555
 10 10 25 75 4 B
HF-P-Z4-D12.0 RT555
 12 12 30 75 4 B
HF-P-Z4-D14.0 RT555
 14 14 32 75 4 B
HF-P-Z4-D16.0 RT555
 16 16 45 100 4 B
HF-P-Z4-D20.0 RT555
 20 20 45 100 4 B

VHM End Mill Extra Long Cutting Edge - Prisma-Line | Rinaldi-Tools
  • -€1.40
  • New
Rinaldi-Tools GmbH

Solid Carbide End Mill - Extra long cutting Edge - 10% Discount Promotion

Regular price €19.50 Price ab €18.10 -€1.40
Availability: 10000 In Stock

Mill Type Solid Carbide End mill 
Helix Angle 38°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Finish
Lenght Extra long cutting Edge
Shank Cylindrical Shank
Flutes 4
Grade RT405: PVD-TIALN-coated high-performance grade
for solid carbide milling cutters
Packaging unit 1 Pc. 

 Eckfräsen    

  

- 4 flute solid carbide cutter 
- Centre Cutting
- TIALN-coated

  D d H L Z Version
SFX-P-Z4-D3.0 RT405
 3 6 20 75 4 A
SFX-P-Z4-D4.0 RT405
 4 6 25 75 4 A
SFX-P-Z4-D5.0 RT405
 5 6 30 75 4 A
SFX-P-Z4-D6.0 RT405
 6 6 30 75 4 B
SFX-P-Z4-D8.0 RT405
 8 8 40 100 4 B
SFX-P-Z4-D10.0 RT405
 10 10 50 110 4 B
SFX-P-Z4-D12.0 RT405
 12 12 50 110 4 B
SFX-P-Z4-D16.0 RT405
 16 16 70 150 4 B
SFX-P-Z4-D20.0 RT405
 20 20 75 150 4 B

VHM Ball Nose End Mill Long Version - Prisma-Line | Rinaldi-Tools
  • -€1.10
  • New
Rinaldi-Tools GmbH

Solid Carbide Ball Nose Cutter - Long Version - 10% Discount Promotion

Regular price €11.50 Price ab €10.40 -€1.10
Availability: 10000 In Stock

Mill Type Solid Carbide Ball Nose Cutter
Helix Angle 30°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Finish
Lenght Long Version
Shank Cylindrical Shank
Flutes 2
Grade RT303: PVD-coated fine-grain carbide for general Application in milling (VHM)
Packaging unit 1 Pc 

 Eckfräsen    

   

- 2-Flute Solid Carbide Ball Nose Cutter 
- Centre Cutting
- PVD-Coated

D r d(h6) H L Z Version
KFL-P-Z2-D2.0 RT303 2 1 6 4 75 2 A
KFL-P-Z2-D2.5 RT303 2,5 1,25 6 5 75 2 A
KFL-P-Z2-D3.0 RT303
 3 1,5 6 6 75 2 A
KFL-P-Z2-D3.5 RT303 3,5 1,75 6 8 75 2 A
KFL-P-Z2-D4.0 RT303
 4 2 6 8 75 2 A
KFL-P-Z2-D5.0 RT303
 5 2,5 6 10 75 2 A
KFL-P-Z2-D6.0 RT303
 6 3 6 12 75 2 B
KFL-P-Z2-D8.0 RT303
 8 4 8 16 75 2 B
KFL-P-Z2-D10.0 RT303
 10 5 10 20 100 2 B
KFL-P-Z2-D12.0 RT303
 12 6 12 24 100 2 B
KFL-P-Z2-D16.0 RT303 16 8 16 32 150 2 B

VHM Torus End Mill - Prisma-Line | Rinaldi-Tools
  • -€1.30
  • New
Rinaldi-Tools GmbH

Solid Carbide Torus Cutter- 10% Discount Promotion

Regular price €13.80 Price ab €12.50 -€1.30
Availability: 10000 In Stock

Mill Type Solid Carbide Torus Cutter
Helix Angle 38°
Workpiece Materials Steel, Stainless Steel, Cast Iron
Lenght Standard Length
Shank Cylindrical Shank
Flutes 4
Grade RT405: PVD-TIALN-coated high-performance grade
for solid carbide milling cutters
Packaging unit 1 Pc 

 Eckfräsen     

  

- 4-Flute Solid Carbide Torus Cutter 
- Centre Cutting
- PVD-TIALN-Coated

D r d1 H L Z Version
TFR-P-Z4-D4.0-R0.3 RT405 4 0,3 4 10 50 4 B
TFR-P-Z4-D4.0-R0.5 RT405 4 0,5 6 10 50 4 A
TFR-P-Z4-D5.0-R0.5 RT405 5 0,5 6 13 50 4 A
TFR-P-Z4-D6.0-R0.3 RT405 6 0,3 6 16 50 4 B
TFR-P-Z4-D6.0-R0.5 RT405 6 0,5 6 16 50 4 B
TFR-P-Z4-D6.0-R1.0 RT405 6 1,0 6 16 50 4 B
TFR-P-Z4-D8.0-R0.3 RT405 8 0,3 8 20 60 4 B
TFR-P-Z4-D8.0-R0.5 RT405 8 0,5 8 20 60 4 B
TFR-P-Z4-D8.0-R1.0 RT405 8 1,0 8 20 60 4 B
TFR-P-Z4-D10.0-R0.5 RT405 10 0,5 10 25 75 4 B
TFR-P-Z4-D10.0-R1.0 RT405 10 1,0 10 25 75 4 B
TFR-P-Z4-D10.0-R2.0 RT405 10 2,0 10 25 75 4 B
TFR-P-Z4-D10.0-R3.0 RT405 10 3,0 10 25 75 4 B
TFR-P-Z4-D12.0-R0.5 RT405 12 0,5 12 30 75 4 B
TFR-P-Z4-D12.0-R1.0 RT405 12 1,0 12 30 75 4 B
TFR-P-Z4-D12.0-R2.0 RT405 12 2,0 12 30 75 4 B
TFR-P-Z4-D12.0-R3.0 RT405 12 3,0 12 30 75 4 B

VHM Ball Nose End Mill Extra Long Shank - Prisma-Line | Rinaldi Tools
  • -€1.70
  • New
Rinaldi-Tools GmbH

Solid Carbide Ball Nose Cutter - Extra Long Shank - 10% Discount Promotion

Regular price €17.00 Price ab €15.30 -€1.70
Availability: 10000 In Stock

Mill Type Solid Carbide Ball Nose Cutter
Helix Angle 30°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Finish
Lenght Extra Long Shank
Shank Cylindrical Shank
Flutes 2
Grade RT303: PVD-coated fine-grain carbide for general Application in milling (VHM)
Packaging unit 1 Pc 

 Eckfräsen    

   

- 2-Flute Solid Carbide Ball Nose Cutter 
- Centre Cutting
- PVD-Coated

D r d(h6) H L Z
KFEL-P-Z2-D6.0 RT303 6 3 6 12 100 2
KFEL-P-Z2-D8.0 RT303 8 4 8 16 100 2
KFEL-P-Z2-D10.0 RT303 10 5 10 20 150 2
KFEL-P-Z2-D12.0 RT303 12 6 12 24 150 2

VHM Hard End Mill 68 HRC - Prisma-Line | Rinaldi-Tools
  • -€2.60
  • New
Rinaldi-Tools GmbH

Solid Carbide Torus Cutter up to 68 HRC - 10% Discount Promotion

Regular price €26.00 Price ab €23.40 -€2.60
Availability: 10000 In Stock

Mill Type Solid Carbide Hard Torus Milling Cutter
Helix Angle 45°
Workpiece Material Hard Materials up to 68 HRC
Lenght Standard Length
Shank Cylindrical Shank
Flutes 4
Grade RT555: PVD-coated carbide substrate for the
Hard machining of steel (up to HRC 55-68).
Highest wear resistance and toughness
Packaging unit 1 Pc 

  Eckfräsen 

 

- 4-Flute Solid Carbide Hard Torus Milling Cutter 
- Centre Cutting
- PVD-Coated

D r d(h6) H L Z Version
HTFR-P-Z4-D3.0-R0.2 RT555 3 0,2 4 8 50 4 B
HTFR-P-Z4-D4.0-R0.2 RT555 4 0,2 4 10 50 4 B
HTFR-P-Z4-D4.0-R0.5 RT555
 4 0,5 4 10 50 4 B
HTFR-P-Z4-D5.0-R0.5 RT555
 5 0,5 6 13 50 4 A
HTFR-P-Z4-D8.0-R1.0 RT555
 8 1 8 20 60 4 B
HTFR-P-Z4-D10.0-R0.5 RT555
 10 0,5 10 25 75 4 B
HTFR-P-Z4-D10.0-R1.0 RT555
 10 1 10 25 75 4 B
HTFR-P-Z4-D12.0-R1.0 RT555
 12 1 12 30 75 4 B
HTFR-P-Z4-D12.0-R2.0 RT555
 12 2 12 30 75 4 B

VHM Aluminum End Mill DLC Long Version - Prisma-Line | Rinaldi-Tools
  • -€1.30
  • New
Rinaldi-Tools GmbH

Solid Carbide End Mill for Aluminum (DLC) - Long Version - 10% Discount Promotion

Regular price €14.10 Price ab €12.80 -€1.30
Availability: 10000 In Stock

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 35°
Workpiece Material Non-Ferrous Metals
Lenght Long Version
Shank Cylindrical Shank
Flutes 3
Grade RT107: The DLC coating (Diamond-Like Carbon) ensures higher wear resistance.
Packaging unit 1 Pc 

 Eckfräsen    

 

- 3-Flute Solid Carbide End Mill 
- Centre Cutting

  D d H L Z Version
AFL-P-Z3-D4.0 RT107 4 6 15 75 3 A
AFL-P-Z3-D5.0 RT107 5 6 20 75 3 A
AFL-P-Z3-D6.0 RT107 6 6 25 75 3 B
AFL-P-Z3-D8.0 RT107 8 8 32 75 3 B
AFL-P-Z3-D10.0 RT107 10 10 45 100 3 B
AFL-P-Z3-D12.0 RT107 12 12 45 100 3 B

VHM Hard Ball Nose End Mill 4 Flutes - Prisma-Line | Rinaldi-Tools
  • -€1.80
  • New
Rinaldi-Tools GmbH

Solid Carbide Ball Nosed Hard Cutter - 4 Flutes - 10% Discount Promotion

Regular price €19.30 Price ab €17.50 -€1.80
Availability: 10000 In Stock

Mill Type Solid Carbide Ball Nose Hard Cutter
Helix Angle 30°
Workpiece Material Hard Materials uo to 68 HRC
Lenght Standard Length
Shank Cylindrical Shank
Flutes 4
Grade RT555: PVD-coated carbide substrate for the
Hard machining of steel (up to HRC 55-68).
Highest wear resistance and toughness
Packaging unit 1 Pc.

 Eckfräsen    

 

- 4-Flute Solid Carbide Ball Nose Cutter
- Centre Cutting
- PVD-coated 

D r d(h6) H L Z Version
HKF-P-Z4-D3.0 RT555
 3 1,5 6 6 50 4 A
HKF-P-Z4-D4.0 RT555
 4 2 6 8 50 4 A
HKF-P-Z4-D5.0 RT555
 5 2,5 6 10 50 4 A
HKF-P-Z4-D8.0 RT555
 8 4 8 16 60 4 B
HKF-P-Z4-D10.0 RT555
 10 5 10 20 75 4 B
HKF-P-Z4-D12.0 RT555
 12 6 12 24 75 4 B
HKF-P-Z4-D16.0 RT555
 16 8 16 32 100 4 B
HKF-P-Z4-D20.0 RT555 20 10 20 40 100 4 B