Error!

Filter By

Materials

Materials

Solid carbide Mills

Solid carbide Mills

Solid Carbide Mills

The Solid carbide mills offered are all made with the latest technology, using ultrafine carbide and the highest quality coatings on the market. Whether for steel, stainless steel, hard materials, or non-ferrous metals, there is something for everyone here.

Active filters

  • Materials: NF-Metals
  • Materials: Special Materials
  • Solid carbide Mills: Chamfer Cutter
  • Solid carbide Mills: End Mill
VHM-Fasfräser 60°
Rinaldi-Tools GmbH

VHM-Fasfräser 60°

Price ab €11.50
Availability: 214748364 In Stock

Mill Type Solid Carbide Chamfer Mill 
Angle 60°
Workpiece Materials Steel, Stainless Steel,  Cast Iron, NF-Materials
Grade RT303: PVD-coated fine-grain carbide
for general Application in milling (VHM)
Packaging unit 1 Pc.

   

  d(h6) L D Shank X Z
FF-Z3-60-D3.0 RT303 3 48 0,2 Cylindrical 60° 3
FF-Z4-60-D4.0 RT303 4 48 0,2 Cylindrical 60° 4
FF-Z4-60-D6.0 RT303 6 55 0,2
 Weldon
 60° 4
FF-Z4-60-D8.0 RT303 8 58 0,5
 Weldon
 60°
 4
FF-Z4-60-D10.0 RT303 10 65 0,5
 Weldon
 60°
 4
FF-Z6-60-D10.0 RT303 10 65 0,7
 Weldon
 60°
 6
FF-Z4-60-D12.0 RT303 12 75 0,5
 Weldon
 60° 4
FF-Z6-60-D12.0 RT303 12 75 0,7 Weldon 60° 6
FF-Z4-60-D16.0 RT303 16 85 0,7 Weldon 60° 4
FF-Z6-60-D16.0 RT303 16 85 0,7 Weldon 60° 6

Solide Carbide Chamfer Mills 90°
Rinaldi-Tools GmbH

Solide Carbide Chamfer Mills 90°

Price ab €13.50
Availability: 2147483316 In Stock

Mill Type Solid Carbide Chamfer Mill 
Angle 90°
Workpiece Material Steel, Stainless Steel,  Cast Iron, NF-Materials
Shank Weldon/Cylinder Shaft
Grade RT303: PVD-coated fine-grain carbide
for general Application in milling (VHM)
Packaging unit 1 Pc.

   

Cylindrical Shank

d(h6) L D X Z
FF-Z3-90-D3.0-Z RT303 3 48 0,2 90° 3
FF-Z4-90-D4.0-Z RT303 4 48 0,2 90° 4
FF-Z4-90-D6.0-Z RT303 6 55 0,2 90° 4
FF-Z4-90-D8.0-Z RT303 8 58 0,5 90° 4
FF-Z4-90-D10.0-Z RT303 10 65 0,5 90° 4
FF-Z4-90-D12.0-Z RT303 12 75 0,5 90° 4
FF-Z4-90-D16.0-Z RT303  16 85 0,7 90° 4

Weldon-Shank

d(h6) L D X Z
FF-Z4-90-D6.0-W RT303 6 55 0,2 90° 4
FF-Z4-90-D8.0-W RT303 8 58 0,5 90° 4
FF-Z4-90-D10.0-W RT303 10 65 0,5 90° 4
FF-Z4-90-D12.0-W RT303 12 75 0,5 90° 4
FF-Z4-90-D16.0-W RT303 16 85 0,7 90° 4

Solide Carbide Chamfer Mill 120°
Rinaldi-Tools GmbH

Solide Carbide Chamfer Mill 120°

Price ab €11.50
Availability: 214748364 In Stock

Mill Type Solid Carbide Chamfer Mill 
Angle 120°
Workpiece Material Steel, Stainless Steel,  Cast Iron, NF-Materials
Grade RT303: PVD-coated fine-grain carbide
for general Application in milling (VHM)
Packaging unit 1 Pc.

   

  d(h6) L D Shank X Teeth
FF-Z3-120-D3.0 RT303 3 48 0,2 Cylindrical 120° 3
FF-Z4-120-D4.0 RT303 4 48 0,2 Cylindrical 120° 4
FF-Z4-120-D6.0 RT303 6 55 0,2
 Weldon
 120° 4
FF-Z4-120-D8.0 RT303 8 58 0,5
 Weldon
 120°
 4
FF-Z4-120-D10.0 RT303 10 65 0,5
 Weldon
 120°
 4
FF-Z4-120-D12.0 RT303 12 75 0,5
 Weldon
 120°
 4
FF-Z4-120-D16.0 RT303 16 85 0,7
 Weldon
 120° 4

Solid Carbide End Mill for NF-Materials - 1 Flute
Rinaldi-Tools GmbH

Solid Carbide End Mill for NF-Materials - 1 Flute

Price ab €9.90
Availability: 2147483584 In Stock

Mill Type Solid Carbide End Mill 
Helix Angle 30°
Workpiece Material NF-Materials
Lenght Standard Lenght
Shank Cylindrical Shaft
Flutes 1
Grade RT30K: Uncoated K30 carbide substrate
for processing non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen    

- 1-Flute Solid Carbide Milling Cutter
- Centre Cutting 

  D d H
 L Z
AF-Z1-D2.0 RT30K 2,0 3 8 50 1
AF-Z1-D3.0 RT30K 3,0 3 12 50 1
AF-Z1-D4.0 RT30K 4,0 4 15 60 1
AF-Z1-D5.0 RT30K 5,0 5 17 60 1
AF-Z1-D6.0 RT30K 6,0 6 20 65 1
AF-Z1-D8.0 RT30K 8,0 8 22 65 1
AF-Z1-D10.0 RT30K 10,0 10 25 75 1
AF-Z1-D12.0 RT30K 12,0 12 30 80 1

Solid Carbide End Mill for NF-Materials - 2 Flutes
Rinaldi-Tools GmbH

Solid Carbide End Mill for NF-Materials - 2 Flutes

Price ab €8.90
Availability: 214748361 In Stock

Mill Type Solid Carbide End Mill  
Helix Angle 55°
Workpiece Material NF-Materials
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 2
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen        

 

- 2-Flute Solid Carbide End Mill
- Centre Cutting

  D d(h6) H L Z
AF-Z2-D1.0 RT30K 1 4 3 50 2
AF-Z2-D1.5 RT30K 1,5 4 4 50 2
AF-Z2-D2.0 RT30K 2 4 6 50 2
AF-Z2-D2.5 RT30K 2,5 4 7 50 2
AF-Z2-D3.0 RT30K 3 6 9 50 2
AF-Z2-D4.0 RT30K 4 6 12 50 2
AF-Z2-D5.0 RT30K 5 6 15 50 2
AF-Z2-D6.0 RT30K 6 6 18 60 2
AF-Z2-D8.0 RT30K 8 8 20 60 2
AF-Z2-D10.0 RT30K 10 10 30 75 2
AF-Z2-D12.0 RT30K 12 12 32 75 2
AF-Z2-D16.0 RT30K 16 16 45 100 2
AF-Z2-D20.0 RT30K 20 20 45 100 2

Solid Carbide End Mill for NF-Materials - 2 Flutes - Long Version
Rinaldi-Tools GmbH

Solid Carbide End Mill for NF-Materials - 2 Flutes - Long Version

Price ab €12.50
Availability: 214748354 In Stock

Mill Type Solid Carbide End Mill 
Helix Angle 55°
Workpiece Material NF-Materials
Lenght Long Version
Shank Cylindrical Shank
Flutes 2
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen        

 

- 2-Flute Solid Carbide End Mill 
- Centre Cutting

  D d(h6) H L Z Version
AFL-Z2-D3.0 RT30K 3 6 12 60 2 A
AFL-Z2-D4.0 RT30K 4 6 16 60 2 A
AFL-Z2-D5.0 RT30K 5 6 20 60 2 A
AFL-Z2-D6.0 RT30K 6 6 25 75 2 B
AFL-Z2-D8.0 RT30K 8 8 32 75 2 B
AFL-Z2-D10.0 RT30K 10 10 45 100 2 B
AFL-Z2-D12.0 RT30K 12 12 45 100 2 B
AFL-Z2-D16.0 RT30K 16 16 65 150 2 B
AFL-Z2-D20.0 RT30K 20 20 75 150 2 B

Solid Carbide End Mill for Aluminum
Rinaldi-Tools GmbH

Solid Carbide End Mill for Aluminum

Price ab €12.70
Availability: 2147483616 In Stock

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 30°
Workpiece Material NF-Materials
Lenght Standard Lenght
Shank Cylindrical Shaft
Flutes 3
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen        

 

- 3-Flute Solid Carbide End Mill for Aluminum
- Centre Cutting

  D d(h6) H L Z Version
AF-Z3-D2.0 RT30K 2 4 6 50 3 A
AF-Z3-D3.0 RT30K 3 4 8 50 3 A
AF-Z3-D4.0 RT30K 4 6 11 50 3 A
AF-Z3-D5.0 RT30K 5 6 13 50 3 A
AF-Z3-D6.0 RT30K 6 6 16 50 3 B
AF-Z3-D8.0 RT30K 8 8 20 60 3 B
AF-Z3-D10.0 RT30K 10 10 25 75 3 B
AF-Z3-D12.0 RT30K 12 12 30 75 3 B
AF-Z3-D16.0 RT30K 16 16 45 100 3 B
AF-Z3-D20.0 RT30K 20 20 45 100 3 B

VHM Aluminum End Mill - Prisma-Line | Rinaldi-Tools
Rinaldi-Tools GmbH

Solid Carbide End Mill for Aluminum - Prisma-Line

Price ab €9.00
Availability: 2147483608 In Stock

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 35°
Workpiece Material NF-Materials
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 3
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc / Set 5 Pc.

 Eckfräsen    

 

- 3-Flute Solid Carbide End Mill 
- Centre Cutting

  D d H L Z Version
AF-P-Z3-D3.0 RT30K 3 4 9 50 3 A
AF-P-Z3-D4.0 RT30K 4 6 10 50 3 A
AF-P-Z3-D5.0 RT30K 5 6 13 50 3 A
AF-P-Z3-D6.0 RT30K 6 6 16 50 3 B
AF-P-Z3-D8.0 RT30K 8 8 20 60 3 B
AF-P-Z3-D10.0 RT30K 10 10 25 75 3 B
AF-P-Z3-D12.0 RT30K 12 12 30 75 3 B
AF-P-Z3-D16.0 RT30K 16 16 36 100 3 B
AF-P-Z3-D20.0 RT30K 20 20 45 100 3 B
Solid Carbide End Mill for Aluminum - Long Version - Prisma-Line
Rinaldi-Tools GmbH

Solid Carbide End Mill for Aluminum - Long Version - Prisma-Line

Price ab €9.80
Availability: 2147483615 In Stock

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 35°
Workpiece Material Non-Ferrous Metals
Lenght Long Version
Shank Cylindrical Shank
Flutes 3
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc. / Set 5 Pc.

 Eckfräsen    

 

- 3-Flute Solid Carbide End Mill 
- Centre Cutting

D d H L Z Version
AFL-P-Z3-D3.0 RT30K 3 6 12 75 3 A
AFL-P-Z3-D4.0 RT30K 4 6 15 75 3 A
AFL-P-Z3-D5.0 RT30K 5 6 20 75 3 A
AFL-P-Z3-D6.0 RT30K 6 6 25 75 3 B
AFL-P-Z3-D8.0 RT30K 8 8 32 75 3 B
AFL-P-Z3-D10.0 RT30K 10 10 45 100 3 B
AFL-P-Z3-D12.0 RT30K 12 12 45 100 3 B
AFL-P-Z3-D16.0 RT30K 16 16 65 150 3 B
AFL-P-Z3-D20.0 RT30K 20 20 75 150 3 B

Solid Carbide End Mill for Aluminum - Extra Long Shank - Prisma-Line
Rinaldi-Tools GmbH

Solid Carbide End Mill for Aluminum - Extra Long Shank - Prisma-Line

Price ab €16.50
Availability: 214748355 In Stock

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 35°
Workpiece Material NF-Materials
Lenght Extra Long Shank
Shank Cylindrical Shank
Flutes 3
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc / Set 5 Pc

  Eckfräsen    

 

- 3-Flute Solid Carbide Milling Cutter 
- Centre Cutting
- For Aluminum and NF-Materials

D d(h6) H L Z
AFEL-P-Z3-D6.0 RT30K
 6 6 16 100 3
AFEL-P-Z3-D8.0 RT30K
 8 8 20 100 3
AFEL-P-Z3-D10.0 RT30K
 10 10 25 150 3
AFEL-P-Z3-D12.0 RT30K
 12 12 30 150 3

Solid Carbide End Mill for Aluminum - Long Version
Rinaldi-Tools GmbH

Solid Carbide End Mill for Aluminum - Long Version

Price ab €12.90
Availability: 2147483624 In Stock

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 45°
Workpiece Material NF-Materials
Lenght Long Version
Shank Cylindrical Shank
Flutes 3
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen        

 

- 3-Flute Solid Carbide End Mill
- Centre Cutting

  D d(h6) H L Z Version
AFL-Z3-D3.0 RT30K 3 6 12 60 3 A
AFL-Z3-D4.0 RT30K 4 6 16 60 3 A
AFL-Z3-D5.0 RT30K 5 6 20 60 3 A
AFL-Z3-D6.0 RT30K 6 6 25 75 3 B
AFL-Z3-D8.0 RT30K 8 8 32 75
 3
 B
AFL-Z3-D10.0 RT30K 10 10 45 100
 3
 B
AFL-Z3-D12.0 RT30K 12 12 45 100
 3
 B
AFL-Z3-D16.0 RT30K 16 16 65 150
 3
 B
AFL-Z3-D20.0 RT30K 20 20 75 150 3 B

Solid Carbide End Mill ALU - 3 Flutes (DLC)
Rinaldi-Tools GmbH

Solid Carbide End Mill ALU - 3 Flutes (DLC)

Price ab €15.60
Availability: 214748364 In Stock

Mill Type Solid Carbide End Mill (DLC)
Helix Angle 37°
Workpiece Material NF-Materials
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 3
Grade RT107: The DLC coating (Diamond-Like Carbon) made of diamond-like carbon ensures lower wear.
Packaging unit 1 Pc

 Eckfräsen    

 

- Centre Cutting

D d H L Z
AF-Z3-D3.0 RT107 3,0 6 8 52 3
AF-Z3-D4.0 RT107 4,0 6 11 55 3
AF-Z3-D5.0 RT107 5,0 6 13 57 3
AF-Z3-D6.0 RT107 6,0 6 13 57 3
AF-Z3-D8.0 RT107 8,0 8 19
 63 3
AF-Z3-D10.0 RT107 10,0 10 22
 72
 3
AF-Z3-D12.0 RT107 12,0 12 26
 83
 3
AF-Z3-D16.0 RT107 16,0 16 32
 92
 3
AF-Z3-D20.0 RT107 20,0 20 38 104 3

Solid Carbide End Mill for NF-Materials - 3 Flutes - Long Version (DLC)
Rinaldi-Tools GmbH

Solid Carbide End Mill for NF-Materials - 3 Flutes - Long Version (DLC)

Price ab €27.60
Availability: 214748364 In Stock

Mill Type Solid Carbide End Mill (DLC)
Helix Angle 37°
Workpiece Material NF-Materials
Lenght Long Version
Shank Cylindrical Shank
Flutes 3
Grade RT107: The DLC coating (Diamond-Like Carbon) made of diamond-like carbon ensures lower wear.
Packaging unit 1 Pc

 Eckfräsen    

 

- Centre Cutting

D d H L Z
AFL-Z3-D6.0 RT107 6,0 6 24 75 3
AFL-Z3-D8.0 RT107 8,0 8 32 75 3
AFL-Z3-D10.0 RT107 10,0 10 40 100 3
AFL-Z3-D12.0 RT107 12,0 12 48
 100 3
AFL-Z3-D16.0 RT107 16,0 16 64 125
 3
AFL-Z3-D20.0 RT107 20,0 20 80
 150
 3
AFL-Z3-D25.0 RT107 25,0 25 50 125 3

Solid Carbide End Mill Corner Radius (DLC)
Rinaldi-Tools GmbH

Solid Carbide End Mill Corner Radius (DLC)

Price ab €23.90
Availability: 214748362 In Stock

Mill Type Solid Carbide End mill with Corner radius (DLC)
Helix Angle 37°
Workpiece Material NF-Materials
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 3
Grade RT107: The DLC coating (Diamond-Like Carbon) made of diamond-like carbon ensures lower wear.
Packaging unit 1 Pc

 Eckfräsen     

 

- Centre Cutting

D r d H L Z
AF-Z3-D6.0-R0,5 RT107 6 R0,5 6 13 57 3
AF-Z3-D6.0-R1,0 RT107 6 R1,0 6 13 57 3
AF-Z3-D6.0-R1,5 RT107 6 R1,5 6 13 57 3
AF-Z3-D8.0-R0,3 RT107 8 R0,3 8 19 63 3
AF-Z3-D8.0-R0,5 RT107 8 R0,5 8 19
 63 3
AF-Z3-D8.0-R1,0 RT107 8 R1,0 8 19 63 3
AF-Z3-D8.0-R1,5 RT107 8 R1,5 8 19
 63
 3
AF-Z3-D10.0-R0,3 RT107 10 R0,3 10 22
 72
 3
AF-Z3-D10.0-R0,5 RT107 10 R0,5 10 22
 72
 3
AF-Z3-D10.0-R1,0 RT107 10 R1,0 10 22 72 3
AF-Z3-D10.0-R1,5 RT107 10 R1,5 10 22 72 3
AF-Z3-D12.0-R1,5 RT107 12 R1,5 12 26 83 3
AF-Z3-D12.0-R2,0 RT107 12 R2,0 12 26 83 3
AF-Z3-D12.0-R2,5 RT107 12 R2,5 12 26 83 3
AF-Z3-D12.0-R3,0 RT107 12 R3,0 12 26 83 3
AF-Z3-D16.0-R1,5 RT107 16 R1,5 16 32 92 3
AF-Z3-D16.0-R2,0 RT107 16 R2,0 16 32 92 3
AF-Z3-D16.0-R2,5 RT107 16 R2,5 16 32 92 3
AF-Z3-D16.0-R3,0 RT107 16 R3,0 16 32 92 3
AF-Z3-D16.0-R4,0 RT107 16 R4,0 16 32 92 3
AF-Z3-D20.0-R2,0 RT107 20 R2,0 20 38 104 3
AF-Z3-D20.0-R2,5 RT107 20 R2,5 20 38 104 3
AF-Z3-D20.0-R3,0 RT107 20 R3,0 20 38 104 3
AF-Z3-D20.0-R4,0 RT107 20 R4,0 20 38 104 3

VHM Aluminum End Mill DLC - Prisma-Line | Rinaldi-Tools
Rinaldi-Tools GmbH

Solid Carbide End Mill for Aluminum (DLC) - Prisma -Line

Price ab €11.00
Availability: 214748349 In Stock

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 35°
Workpiece Material Non-Ferrous Metals
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 3
Grade RT107: The DLC coating (Diamond-Like Carbon) ensures higher wear resistance.
Packaging unit 1 Pc / Set 5 Pc

 Eckfräsen    

 

- 3-Flute Solid Carbide End Mill 
- Centre Cutting

  D d H L Z Version
AF-P-Z3-D4.0 RT107 4 6 10 50 3 A
AF-P-Z3-D5.0 RT107 5 6 13 50 3 A
AF-P-Z3-D6.0 RT107 6 6 16 50 3 B
AF-P-Z3-D8.0 RT107 8 8 20 60 3 B
AF-P-Z3-D10.0 RT107 10 10 25 75 3 B
AF-P-Z3-D12.0 RT107 12 12 30 75 3 B
AF-P-Z3-D16.0 RT107 16 16 36 100 3 B
AF-P-Z3-D20.0 RT107 20 20 45 100 3 B

VHM Aluminum End Mill DLC Long Version - Prisma-Line | Rinaldi-Tools
Rinaldi-Tools GmbH

Solid Carbide End Mill for Aluminum (DLC) - Long Version - Prisma-Line

Price ab €12.80
Availability: 2147483608 In Stock

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 35°
Workpiece Material Non-Ferrous Metals
Lenght Long Version
Shank Cylindrical Shank
Flutes 3
Grade RT107: The DLC coating (Diamond-Like Carbon) ensures higher wear resistance.
Packaging unit 1 Pc / Set 5 Pc.

 Eckfräsen    

 

- 3-Flute Solid Carbide End Mill 
- Centre Cutting

  D d H L Z Version
AFL-P-Z3-D4.0 RT107 4 6 15 75 3 A
AFL-P-Z3-D5.0 RT107 5 6 20 75 3 A
AFL-P-Z3-D6.0 RT107 6 6 25 75 3 B
AFL-P-Z3-D8.0 RT107 8 8 32 75 3 B
AFL-P-Z3-D10.0 RT107 10 10 45 100 3 B
AFL-P-Z3-D12.0 RT107 12 12 45 100 3 B

Solid Carbide End Mill ALU 3-Flute Helix Corner Radius Long Version (DLC)
Rinaldi-Tools GmbH

Solid Carbide End Mill ALU 3-Flute Helix Corner Radius Long Version (DLC)

Price ab €31.10
Availability: 214748364 In Stock

Mill Type  Solid Carbide End Mill with Corner radius (DLC)
Helix Angle 37°
Workpiece Material NF-Materials
Lenght Long Version
Shank Cylindrical Shaft
Flutes 3
Grade RT107: The DLC coating (Diamond-Like Carbon) made of diamond-like carbon ensures lower wear.
Packaging unit 1 Pc

 Eckfräsen     

 

- Centre Cutting

D r d H L Z
AFL-Z3-D6.0-R0,5 RT107 6 R0,5 6 24 75 3
AFL-Z3-D6.0-R1,0 RT107 6 R1,0 6 24 75 3
AFL-Z3-D8.0-R0,5 RT107 8 R0,5 8 32
 75 3
AFL-Z3-D8.0-R1,0 RT107 8 R1,0 8 32 75
 3
AFL-Z3-D8.0-R1,5 RT107 8 R1,5 8 32
 75
 3
AFL-Z3-D8.0-R2,0 RT107 8 R2,0 8 32 75 3
AFL-Z3-D10.0-R0,5 RT107 10 R0,5 10 40
 100
 3
AFL-Z3-D10.0-R1,0 RT107 10 R1,0 10 40 100 3
AFL-Z3-D10.0-R1,5 RT107 10 R1,5 10 40 100 3
AFL-Z3-D10.0-R2,0 RT107 10 R2,0 10 40 100 3
AFL-Z3-D12.0-R0,5 RT107 12 R0,5 12 48 100 3
AFL-Z3-D12.0-R1,0 RT107 12 R1,0 12 48 100 3
AFL-Z3-D12.0-R1,5 RT107 12 R1,5 12 48 100 3
AFL-Z3-D12.0-R2,0 RT107 12 R2,0 12 48 100 3
AFL-Z3-D12.0-R2,5 RT107 12 R2,5 12 48 100 3
AFL-Z3-D12.0-R3,0 RT107 12 R3,0 12 48 100 3
AFL-Z3-D16.0-R0,5 RT107 16 R0,5 16 64 125 3
AFL-Z3-D16.0-R1,0 RT107 16 R1,0 16 64 125 3
AFL-Z3-D16.0-R1,5 RT107 16 R1,5 16 64 125 3
AFL-Z3-D16.0-R2,0 RT107 16 R2,0 16 64 125 3
AFL-Z3-D16.0-R2,5 RT107 16 R2,5 16 64 125 3
AFL-Z3-D16.0-R3,0 RT107 16 R3,0 16 64 125 3
AFL-Z3-D16.0-R4,0 RT107 16 R4,0 16 64 125 3
AFL-Z3-D20.0-R0,5 RT107 20 R0,5 20 80 150 3
AFL-Z3-D20.0-R1,0 RT107 20 R1,0 20 80 150 3
AFL-Z3-D20.0-R1,5 RT107 20 R1,5 20 80 150 3
AFL-Z3-D20.0-R2,0 RT107 20 R2,0 20 80 150 3
AFL-Z3-D20.0-R2,5 RT107 20 R2,5 20 80 150 3
AFL-Z3-D20.0-R3,0 RT107 20 R3,0 20 80 150 3
AFL-Z3-D20.0-R4,0 RT107 20 R4,0 20 80 150 3

Solid carbide milling cutter for Super Alloys 5 flutes
Rinaldi-Tools GmbH

Solid carbide milling cutter for Super Alloys 5 flutes

Price ab €20.90
Availability: 214748364 In Stock

Mill Type Solid carbide milling cutter for Super Alloys
Workpiece Material Heat resistant super alloys
Processing Medium and finish
Lenght Standard
Shank Cylindrical Shank
Flutes 5
Grade RT520: Modern coating technology
for high temperature resistance
Packaging unit 1 Pc.

End mills for titanium and titanium alloys, Inconel, Hastelloy, Waspaloy, Nimonic, nickel-based alloys, and austenitic stainless steels

 Eckfräsen   

- Centre Cutting

D d H
 L Z Corner Bevel
TIF-Z5-D6.0 RT520 6 6 10 54 5 0,20
TIF-Z5-D8.0 RT520 8 8 12 58 5 0,20
TIF-Z5-D10.0 RT520 10 10 14 66 5 0,30
TIF-Z5-D12.0 RT520 12 12 16 73 5 0,35
TIF-Z5-D16.0 RT520 16 16 22 82 5 0,40
TIF-Z5-D20.0 RT520 20 20 26 92 5 0,50
TIF-Z5-D25.0 RT520 25 25 29 100 5 0,50

Solid carbide milling cutter for Super Alloys 5 flutes, long version
Rinaldi-Tools GmbH

Solid carbide milling cutter for Super Alloys 5 flutes, long version

Price ab €21.90
Availability: 214748364 In Stock

Mill Typ Solid carbide milling cutter for Super Alloys 
Material Heat resistant super alloys
Processing Medium and finish
Lenght Long version
Shaft Cylindrical Shank
Flutes 5
Coating RT520: Modern coating technology
for high temperature resistance
Packaging unit 1 Pc.

End mills for titanium and titanium alloys, Inconel, Hastelloy, Waspaloy, Nimonic, nickel-based alloys, and austenitic stainless steels

 Eckfräsen   

- Centre Cutting

D d H L Z Corner Bevel
TIFL-Z5-D6.0 RT520 6 6 13 57 5 0,20
TIFL-Z5-D8.0 RT520 8 8 19 63 5 0,20
TIFL-Z5-D10.0 RT520 10 10 22 72 5 0,30
TIFL-Z5-D12.0 RT520 12 12 26 83 5 0,35
TIFL-Z5-D16.0 RT520 16 16 36 92 5 0,40
TIFL-Z5-D20.0 RT520 20 20 44 104 5 0,50
TIFL-Z5-D25.0 RT520 25 25 54 121 5 0,50

Solid carbide milling cutter for Super Alloys with corner radius 5 flutes
Rinaldi-Tools GmbH

Solid carbide milling cutter for Super Alloys with corner radius 5 flutes

Price ab €24.90
Availability: 214748364 In Stock

Mill Typ Solid carbide milling cutter for Super Alloys with corner radius
Material Heat resistant super alloys
Processing Medium and finish
Lenght Standard
Shaft Cylindrical Shank
Flutes 5
Coating RT520: Modern coating technology
for high temperature resistance
Packaging unit 1 Pc.

End mills for titanium and titanium alloys, Inconel, Hastelloy, Waspaloy, Nimonic, nickel-based alloys, and austenitic stainless steels

 Eckfräsen    

- Centre Cutting

D d H L Z Radius (r)
TIFR-Z5-D6.0-R0,5 RT520 6 6 10 54 5 0,5
TIFR-Z5-D8.0-R0,5 RT520 8 8 12 58 5 0,5
TIFR-Z5-D10.0-R0,5 RT520 10 10 14 66 5 0,5
TIFR-Z5-D12.0-R0,5 RT520 12 12 16 73 5 0,5
TIFR-Z5-D16.0-R1,0 RT520 16 16 22 82 5 1,0
TIFR-Z5-D20.0-R1,0 RT520 20 20 26 92 5 1,0
TIFR-Z5-D25.0-R1,0 RT520 25 25 29 100 5 1,0