| Tap Typ | HSS-PM |
| Hole | Trough Hole |
| Thread | Metric |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-PM |
| Hole | Trough Hole |
| Thread | Metric |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Item Nr.: | Thread/D | P | L2 | L | L4 | d | Z | K | Kl | Core Hole | |
| GB-D-M2-HSS-PM-TiALN | 3301151 | M2 | 0,4 | 8 | 45 | 13 | 2,8 | 2 | 2,1 | 5 | 1,6 |
| GB-D-M2,5-HSS-PM-TiALN | 3301152 | M2,5 | 0,45 | 9 | 50 | 15 | 2,8 | 2 | 2,1 | 5 | 2,1 |
| GB-D-M3-HSS-PM-TiALN | 3301153 | M3 | 0,5 | 11 | 56 | 18 | 3,5 | 3 | 2,7 | 6 | 2,5 |
| GB-D-M3,5-HSS-PM-TiALN | 3301154 | M3,5 | 0,6 | 12 | 56 | 20 | 4 | 3 | 3 | 6 | 2,9 |
| GB-D-M4-HSS-PM-TiALN | 3301155 | M4 | 0,7 | 13 | 63 | 21 | 4,5 | 3 | 3,4 | 6 | 3,3 |
| GB-D-M5-HSS-PM-TiALN | 3301156 | M5 | 0,8 | 15 | 70 | 25 | 6 | 3 | 4,9 | 8 | 4,2 |
| GB-D-M6-HSS-PM-TiALN | 3301157 | M6 | 1 | 17 | 80 | 30 | 6 | 3 | 4,9 | 8 | 5 |
| GB-D-M8-HSS-PM-TiALN | 3301158 | M8 | 1,25 | 20 | 90 | 35 | 8 | 3 | 6,2 | 9 | 6,8 |
| GB-D-M10-HSS-PM-TiALN | 3301159 | M10 | 1,5 | 22 | 100 | 39 | 10 | 3 | 8 | 11 | 8,5 |
| GB-D-M12-HSS-PM-TiALN | 3301160 | M12 | 1,75 | 24 | 110 | 44 | 9 | 3 | 7 | 10 | 10,2 |
| GB-D-M14-HSS-PM-TiALN | 3301161 | M14 | 2 | 26 | 110 | 44 | 11 | 3 | 9 | 12 | 12 |
| GB-D-M16-HSS-PM-TiALN | 3301162 | M16 | 2 | 27 | 110 | 44 | 12 | 3 | 9 | 12 | 14 |
| GB-D-M18-HSS-PM-TiALN | 3301163 | M18 | 2,5 | 30 | 125 | 50 | 14 | 3 | 11 | 14 | 15,5 |
| GB-D-M20-HSS-PM-TiALN | 3301164 | M20 | 2,5 | 32 | 140 | 54 | 16 | 3 | 12 | 15 | 17,5 |
| GB-D-M22-HSS-PM-TiALN | 3301165 | M22 | 2,5 | 32 | 140 | 54 | 18 | 3 | 14,5 | 17 | 19,5 |
| GB-D-M24-HSS-PM-TiALN | 3301166 | M24 | 3 | 34 | 160 | 60 | 18 | 3 | 14,5 | 17 | 21 |
| Workpiece Material | Tensile strength | Cutting Speed |
| (N/mm²) | Vc (m/min) | |
| Structural Steel | <450 | 10-55 |
| Tempered Steel | 450-700 | 8-30 |
| Tooling Steel | >700 | 8-30 |
| Stainless Steel | <1100 | 8-20 |
| Cast Iron | 15-35 | |
| Aluminum cast alloys (<12% Si.) | <600 | 15-35 |
| Copper/Brass | <850 | 15-35 |
Data sheet
| Tap Typ | HSS-PM |
| Hole | Trough Hole |
| Thread | Metric |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-E |
| Hole | Blind Hole |
| Thread | Imperial |
| Materials | Steel and Stainless Steel |
| Flank Angle | 55° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-PM |
| Hole | Trough Hole |
| Thread | Metric, Fine Thread |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Type | HSS-PM |
| Hole | Blind Hole |
| Thread | Metric |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-E |
| Hole | Blind hole |
| Thread | Metric |
| Materials | NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-E-TiN |
| Hole | Blind Hole |
| Thread | Metric |
| Length | Jobber |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-E |
| Hole | Trough Hole |
| Thread | Imperial |
| Materials | Steel, Cast Iron and NF-Materials |
| Flank Angle | 55° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-E |
| Hole | Through hole |
| Thread | Metric |
| Materials | NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Type | HSS-E |
| Hole | Blind Hole |
| Thread | Metric |
| Workpiece Materials | Steel, Stainless Steel, Cast Iron, NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| D | P | L2 | L | L4 | d | K | Kl | Z | |
| GB-S-ISO-M3-HSS-E-TIN | M3 | 0,5 | 6 | 56 | 18 | 3,5 | 2,7 | 6 | 3 |
| GB-S-ISO-M4-HSS-E-TIN | M4 | 0,7 | 7 | 63 | 21 | 4,5 | 3,4 | 6 | 3 |
| GB-S-ISO-M5-HSS-E-TIN | M5 | 0,8 | 8 | 70 | 25 | 6 | 4,9 | 8 | 3 |
| GB-S-ISO-M6-HSS-E-TIN | M6 | 1 | 10 | 80 | 30 | 6 | 4,9 | 8 | 3 |
| GB-S-ISO-M8-HSS-E-TIN | M8 | 1,25 | 13 | 90 | 35 | 8 | 6,2 | 9 | 3 |
| GB-S-ISO-M10-HSS-E-TIN | M10 | 1,5 | 15 | 100 | 39 | 10 | 8 | 11 | 3 |
| GB-S-ISO-M12-HSS-E-TIN | M12 | 1,75 | 18 | 110 | 44 | 9 | 7 | 10 | 3 |
| GB-S-ISO-M16-HSS-E-TIN | M16 | 2 | 20 | 110 | 44 | 12 | 9 | 12 | 3 |
| GB-S-ISO-M20-HSS-E-TIN | M20 | 2,5 | 25 | 140 | 54 | 16 | 12 | 15 | 4 |
| GB-S-ISO-M24-HSS-E-TIN | M24 | 3 | 30 | 160 | 60 | 18 | 14.5 | 17 | 4 |
| GB-S-ISO-M30-HSS-E-TIN | M30 | 3,5 | 35 | 180 | 70 | 22 | 18 | 21 | 4 |
| Tap Typ | HSS-E-TiN |
| Hole | Trough Hole |
| Thread | Metric |
| Length | Jobber |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-PM |
| Hole | Blind Hole |
| Thread | Metric, Fine thread |
| Materials | Steel, Stainless Steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Type | HSS-E |
| Hole | Blind Hole |
| Thread | Metric, Fine Thread |
| Materials | Steel, Stainless steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc |
| Tap Typ | HSS-E |
| Hole | Trough Hole |
| Thread | Metric, Fine Thread |
| Materials | Steel, Stainless steel, Cast Iron and NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
| Tap Typ | HSS-E |
| Hole | Trough Hole |
| Thread | Metric |
| Materials | Steel, Stainless Steel, Cast Iron, NF-Materials |
| Flank Angle | 60° |
| Packaging unit | 1 Pc. |
Deutsch
English