Error!

Solide Carbide Chamfer Mill 120°
Solide Carbide Chamfer Mill 120°
    Solide Carbide Chamfer Mill 120°
    Solide Carbide Chamfer Mill 120°

Solide Carbide Chamfer Mill 120°

€11.50
Tax excluded
Diameter
Quantity

Mill Type Solid Carbide Chamfer Mill 
Angle 120°
Workpiece Material Steel, Stainless Steel,  Cast Iron, NF-Materials
Grade RT303: PVD-coated fine-grain carbide
for general Application in milling (VHM)
Packaging unit 1 Pc.

   

  d(h6) L D Shank X Teeth
FF-Z3-120-D3.0 RT303 3 48 0,2 Cylindrical 120° 3
FF-Z4-120-D4.0 RT303 4 48 0,2 Cylindrical 120° 4
FF-Z4-120-D6.0 RT303 6 55 0,2
 Weldon
 120° 4
FF-Z4-120-D8.0 RT303 8 58 0,5
 Weldon
 120°
 4
FF-Z4-120-D10.0 RT303 10 65 0,5
 Weldon
 120°
 4
FF-Z4-120-D12.0 RT303 12 75 0,5
 Weldon
 120°
 4
FF-Z4-120-D16.0 RT303 16 85 0,7
 Weldon
 120° 4

Mill Type Solid Carbide Chamfer Mill 
Angle 120°
Workpiece Material Steel, Stainless Steel,  Cast Iron, NF-Materials
Grade RT303: PVD-coated fine-grain carbide
for general Application in milling (VHM)
Packaging unit 1 Pc.

   

Item Designation Item Nr. d(h6) L D Shank X Z
FF-Z3-120-D3.0 RT303 2551101 3 48 0,2 Cylindrical 120° 3
FF-Z4-120-D4.0 RT303 2551102 4 48 0,2 Cylindrical 120° 4
FF-Z4-120-D6.0 RT303 2551103 6 55 0,2
 Weldon
 120° 4
FF-Z4-120-D8.0 RT303 2551104 8 58 0,5
 Weldon
 120°
 4
FF-Z4-120-D10.0 RT303 2551105 10 65 0,5
 Weldon
 120°
 4
FF-Z4-120-D12.0 RT303 2551106 12 75 0,5
 Weldon
 120°
 4
FF-Z4-120-D16.0 RT303 2551107 16 85 0,7
 Weldon
 120° 4

Cutting Data

Workpiece Material Tensile Strenth Cutting Speed Feed fz (mm/z)
(N/mm²) Ae Vc (m/min) Ø 3-5 Ø 6-8 Ø 10 Ø 12-16 Ø 20

Structural Steel

 <450 1/10 160-230 0,02-0,03 0,03-0,04 0,06 0,07-0,08 0,09

Tempered Steel

 450-700 1/10 130-170 0,02-0,03 0,03-0,04 0,06 0,07-0,08 0,09

Tooling Steel

 >700 1/10 120-160 0,02-0,03 0,03-0,04 0,06 0,07-0,08 0,09

Stainless Steel

 <1100 1/10 60-80 0,02 0,02-0,03 0,05 0,06 0,07

Cast Iron

 1/10 150-230 0,02-0,03 0,03-0,04 0,06 0,07-0,08 0,09

Aluminum/Aluminum-alloys (<12% Si.)

 <600 1/10 500-1200 0,03-0,05 0,05-0,06 0,09 0,11-0,12 0,14

Copper/Brass

 <600 1/10 250-500 0,03-0,05 0,05-0,06 0,09 0,11-0,12 0,14

Rinaldi-Tools GmbH
2551101

Data sheet

Materials
Cast Iron
NF-Metals
Stainless Steel
Steel
Solid carbide Mills
Chamfer Cutter

16 other products in the same category:

Solid carbide milling cutter for Super Alloys with corner radius 5 flutes
Rinaldi-Tools GmbH

Solid carbide milling cutter for Super Alloys with corner radius 5 flutes

Price ab €24.90
Availability: 214748364 In Stock

Mill Typ Solid carbide milling cutter for Super Alloys with corner radius
Material Heat resistant super alloys
Processing Medium and finish
Lenght Standard
Shaft Cylindrical Shank
Flutes 5
Coating RT520: Modern coating technology
for high temperature resistance
Packaging unit 1 Pc.

End mills for titanium and titanium alloys, Inconel, Hastelloy, Waspaloy, Nimonic, nickel-based alloys, and austenitic stainless steels

 Eckfräsen    

- Centre Cutting

D d H L Z Radius (r)
TIFR-Z5-D6.0-R0,5 RT520 6 6 10 54 5 0,5
TIFR-Z5-D8.0-R0,5 RT520 8 8 12 58 5 0,5
TIFR-Z5-D10.0-R0,5 RT520 10 10 14 66 5 0,5
TIFR-Z5-D12.0-R0,5 RT520 12 12 16 73 5 0,5
TIFR-Z5-D16.0-R1,0 RT520 16 16 22 82 5 1,0
TIFR-Z5-D20.0-R1,0 RT520 20 20 26 92 5 1,0
TIFR-Z5-D25.0-R1,0 RT520 25 25 29 100 5 1,0

Solid Carbide End Mill for Aluminum - Extra Long Shank - Prisma-Line
Rinaldi-Tools GmbH

Solid Carbide End Mill for Aluminum - Extra Long Shank - Prisma-Line

Price ab €16.50
Availability: 214748355 In Stock

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 35°
Workpiece Material NF-Materials
Lenght Extra Long Shank
Shank Cylindrical Shank
Flutes 3
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc / Set 5 Pc

  Eckfräsen    

 

- 3-Flute Solid Carbide Milling Cutter 
- Centre Cutting
- For Aluminum and NF-Materials

D d(h6) H L Z
AFEL-P-Z3-D6.0 RT30K
 6 6 16 100 3
AFEL-P-Z3-D8.0 RT30K
 8 8 20 100 3
AFEL-P-Z3-D10.0 RT30K
 10 10 25 150 3
AFEL-P-Z3-D12.0 RT30K
 12 12 30 150 3

Solid Carbide Ball Nose Cutter - 4 Flutes - Long Version
Rinaldi-Tools GmbH

Solid Carbide Ball Nose Cutter - 4 Flutes - Long Version

Price ab €17.50
Availability: 2147483635 In Stock

Mill Type Solid Carbide Ball Nose Cutter
Helix Angle 30°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Medium and Finish
Lenght Long Version
Shank Cylindrical Shank
Flutes 4
Grade RT405: PVD-TIALN-coated high-performance
grade for solid carbide milling cutters
Packaging unit 1 Pc

 Eckfräsen    

   

- 4-Flute Solid Carbide Ball Nose Cutter 
- Centre Cutting
- PVD-TiALN-Coated

D r d(h6) H L Z
KFL-Z4-D3.0 RT405 3 1,5 6 6 75 4
KFL-Z4-D4.0 RT405 4 2 6 8 75 4
KFL-Z4-D5.0 RT405 5 2,5 6 10 75 4
KFL-Z4-D6.0 RT405 6 3 6 12 75 4
KFL-Z4-D8.0 RT405 8 4 8 16 100 4
KFL-Z4-D10.0 RT405 10 5 10 20 100 4
KFL-Z4-D12.0 RT405 12 6 12 24 100 4
KFL-Z4-D14.0 RT405 14 7 14 28 100 4
KFL-Z4-D16.0 RT405 16 8 16 32 150 4
KFL-Z4-D20.0 RT405 20 10 20 40 150 4

VHM End Mill Extra Long Cutting Edge - Prisma-Line | Rinaldi-Tools
Rinaldi-Tools GmbH

Solid Carbide End Mill - Extra long cutting Edge - Prisma-Line

Price ab €12.80
Availability: 214748346 In Stock

Mill Type Solid Carbide End mill 
Helix Angle 38°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Finish
Lenght Extra long cutting Edge
Shank Cylindrical Shank
Flutes 4
Grade RT405: PVD-TIALN-coated high-performance grade
for solid carbide milling cutters
Packaging unit 1 Pc. / Set 5 Pc.

 Eckfräsen    

  

- 4 flute solid carbide cutter 
- Centre Cutting
- TIALN-coated

  D d H L Z Version
SFX-P-Z4-D3.0 RT405
 3 6 20 75 4 A
SFX-P-Z4-D4.0 RT405
 4 6 25 75 4 A
SFX-P-Z4-D5.0 RT405
 5 6 30 75 4 A
SFX-P-Z4-D6.0 RT405
 6 6 30 75 4 B
SFX-P-Z4-D8.0 RT405
 8 8 40 100 4 B
SFX-P-Z4-D10.0 RT405
 10 10 50 110 4 B
SFX-P-Z4-D12.0 RT405
 12 12 50 110 4 B
SFX-P-Z4-D16.0 RT405
 16 16 70 150 4 B
SFX-P-Z4-D20.0 RT405
 20 20 75 150 4 B

VHM HPC End Mill Weldon Shank - Prisma-Line | Rinaldi-Tools
Rinaldi-Tools GmbH

Solid Carbide HPC Mill - Weldon Shank - Prisma-Line

Price ab €9.90
Availability: 2147483618 In Stock

Mill Type Solid Carbide End mill 
Helix Angle 35°/38°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Roughing and Finish
Length Standard Length
Shank Weldon Shank
Flutes 4
Grade RT405: PVD-TiAlN-coated high-performance grade
for solid carbide milling cutters
Packaging unit 1 Pc / Set 5 Pc.

 Eckfräsen    

   

- 4 flute solid carbide cutter 
- Cutting across the middle
- TiAlN-coated
- Roughing/finishing

D d(h6) H L Z Version
HPC-P-Z4-D3.0-W RT405 3 6 8 50 4 A
HPC-P-Z4-D4.0-W RT405 4 6 11 50 4 A
HPC-P-Z4-D5.0-W RT405 5 6 13 50 4 A
HPC-P-Z4-D6.0-W RT405 6 6 16 50 4 B
HPC-P-Z4-D8.0-W RT405 8 8 20 60 4 B
HPC-P-Z4-D10.0-W RT405 8 8 20 60 4 B
HPC-P-Z4-D12.0-W RT405 12 12 30 75 4 B
HPC-P-Z4-D16.0-W RT405 16 16 45 100 4 B

Solid Carbide End Mill for NF-Materials - 2 Flutes
Rinaldi-Tools GmbH

Solid Carbide End Mill for NF-Materials - 2 Flutes

Price ab €8.90
Availability: 214748361 In Stock

Mill Type Solid Carbide End Mill  
Helix Angle 55°
Workpiece Material NF-Materials
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 2
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen        

 

- 2-Flute Solid Carbide End Mill
- Centre Cutting

  D d(h6) H L Z
AF-Z2-D1.0 RT30K 1 4 3 50 2
AF-Z2-D1.5 RT30K 1,5 4 4 50 2
AF-Z2-D2.0 RT30K 2 4 6 50 2
AF-Z2-D2.5 RT30K 2,5 4 7 50 2
AF-Z2-D3.0 RT30K 3 6 9 50 2
AF-Z2-D4.0 RT30K 4 6 12 50 2
AF-Z2-D5.0 RT30K 5 6 15 50 2
AF-Z2-D6.0 RT30K 6 6 18 60 2
AF-Z2-D8.0 RT30K 8 8 20 60 2
AF-Z2-D10.0 RT30K 10 10 30 75 2
AF-Z2-D12.0 RT30K 12 12 32 75 2
AF-Z2-D16.0 RT30K 16 16 45 100 2
AF-Z2-D20.0 RT30K 20 20 45 100 2

HM HPC End Mill Extra Long Shank - Prisma-Line | Rinaldi-Tools
Rinaldi-Tools GmbH

Solid Carbide HPC-End Mill - Extra Long Shank - Prisma-Line

Price ab €14.50
Availability: 2147483606 In Stock

Mill Type Solid Carbide End Mill 
Helix Angle 35°/38°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Roughing and Finish
Lenght Extra Long Shank
Shank Cylindrical Shank
Flutes 4
Grade RT405: PVD-TiAlN-coated high-performance grade
for solid carbide milling cutters
Packaging unit 1 Pc / Set 5 Pc.

 Eckfräsen    

   

- 4-Flute Solid Carbide High Performance Cutter 
- Centre Cutting
- TiAlN-coated
- Roughing/Finishing

D d H L Z
HPCEL-P-Z4-D6.0 RT405
 6 6 16
 100 4
HPCEL-P-Z4-D8.0 RT405
 8 8 20 100 4
HPCEL-P-Z4-D10.0 RT405
 10 10 25
 150 4
HPCEL-P-Z4-D12.0 RT405
 12 12 30 150 4

Solid Carbide HPC Mill with neck relief - Short Version
Rinaldi-Tools GmbH

Solid Carbide HPC Mill with neck relief - Short Version

Price ab €13.50
Availability: 2147483538 In Stock

Mill Type Solid Carbide End mill 
Helix Angle 35°/38°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Roughing and Finish
Length Short version
Shank Weldon Shank
Flutes 4
Grade RT405: PVD-TiAlN-coated high-performance grade
for solid carbide milling cutters
Packaging unit 1 Pc

 Eckfräsen    

   

- 4-Flute Solid Carbide Cutter 
- Centre Cutting
- TiAlN-coated
- Roughing/finishing

 D d(h6) d1 H M L Z
4.0  6 3,7 8 16 54 4
5.0  6 4,7 9 17 54 4
6.0  6 5,7 10 18 54 4
8.0  8 7,7 12 22 58 4
10.0  10 9,5 14 26 66 4
12.0  12 11,5 16 28 73 4
16.0  16 15,5 22 34 82 4
20.0  20 19,5 26 42 92 4

Solid Carbide Ball Nose Cutter for NF-Materials - Long Version
Rinaldi-Tools GmbH

Solid Carbide Ball Nose Cutter for NF-Materials - Long Version

Price ab €19.90
Availability: 2147483637 In Stock

Mill Type Solid Carbide Ball Nosed Cutter 
Helix Angle 30°
Workpiece Material NF-Materials
Lenght Long Version
Shank Cylindrical Shaft
Flutes 2
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc

  Eckfräsen      

 

- 2-Flute Solid Carbide Ball Nosed Cutter
- Centre Cutting


 		 D R d2(h6) d1 H M L Z
AKFL-Z2-D3.0 RT30K 3 1,5 6 2,8 6 9 75 2
AKFL-Z2-D4.0 RT30K 4 2 6 3,7 8 12 75 2
AKFL-Z2-D5.0 RT30K 5 2,5 6 4,6 10 15 80 2
AKFL-Z2-D6.0 RT30K 6 3 6 5,5 12 20 80 2
AKFL-Z2-D8.0 RT30K 8 4 8 7,4 16 26 90 2
AKFL-Z2-D10.0 RT30K 10 5 10 9,2 20 31 100 2
AKFL-Z2-D12.0 RT30K 12 6 12 11 24 37 120 2
AKFL-Z2-D16.0 RT30K 16 8 16 15 32 43 140 2

Solid Carbide End Mill for NF-Materials - 2 Flutes - Long Version
Rinaldi-Tools GmbH

Solid Carbide End Mill for NF-Materials - 2 Flutes - Long Version

Price ab €12.50
Availability: 214748354 In Stock

Mill Type Solid Carbide End Mill 
Helix Angle 55°
Workpiece Material NF-Materials
Lenght Long Version
Shank Cylindrical Shank
Flutes 2
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen        

 

- 2-Flute Solid Carbide End Mill 
- Centre Cutting

  D d(h6) H L Z Version
AFL-Z2-D3.0 RT30K 3 6 12 60 2 A
AFL-Z2-D4.0 RT30K 4 6 16 60 2 A
AFL-Z2-D5.0 RT30K 5 6 20 60 2 A
AFL-Z2-D6.0 RT30K 6 6 25 75 2 B
AFL-Z2-D8.0 RT30K 8 8 32 75 2 B
AFL-Z2-D10.0 RT30K 10 10 45 100 2 B
AFL-Z2-D12.0 RT30K 12 12 45 100 2 B
AFL-Z2-D16.0 RT30K 16 16 65 150 2 B
AFL-Z2-D20.0 RT30K 20 20 75 150 2 B

VHM Ball Nose End Mill Standard - Prisma-Line | Rinaldi-Tools
Rinaldi-Tools GmbH

Solid Carbide Ball Nose Cutter - Prisma-Line

Price ab €9.80
Availability: 214748364 In Stock

Mill Type Solid Carbide Ball Nose Cutter
Helix Angle 30°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Finish
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 2
Grade RT303: PVD-coated fine-grain carbide for general Application in milling (VHM)
Packaging unit 1 Pc / Set 5 Pc

 Eckfräsen    

   

- 2-Flute Solid Carbide Ball Nose Cutter 
- Centre Cutting
- PVD-Coated

D r d(h6) H L Z Version
KF-P-Z2-D1.0 RT303 1 0,5 6 2 50 2 A
KF-P-Z2-D2.0 RT303 2 1 6 4 50 2 A
KF-P-Z2-D3.0 RT303
 3 1,5 6 6 50 2 A
KF-P-Z2-D4.0 RT303
 4 2 6 8 50 2 A
KF-P-Z2-D5.0 RT303
 5 2,5 6 10 50 2 A
KF-P-Z2-D6.0 RT303
 6 3 6 12 50 2 B
KF-P-Z2-D8.0 RT303
 8 4 8 16 60 2 B
KF-P-Z2-D10.0 RT303
 10 5 10 20 75 2 B
KF-P-Z2-D12.0 RT303
 12 6 12 24 75 2 B
KF-P-Z2-D16.0 RT303
 16 8 16 32 100 2 B

VHM End Mill Cylindrical Shank - Prisma-Line | Rinaldi-Tools
Rinaldi-Tools GmbH

Solid Carbide End Mill - Cylindrical Shank - Prisma-Line

Price ab €9.50
Availability: 2147483605 In Stock

Mill Type Solid Carbide End Mill 
Helix Angle 38°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Finish
Lenght Standard Length
Shank Cylindrical Shank
Flutes 4
Grade RT405: PVD-TIALN-coated high-performance grade
for solid carbide milling cutters
Packaging unit 1 Pc. / Set 5 Pc.

  Eckfräsen    

  

- 4 flute solid carbide cutter 
- Centre Cutting
- TIALN-coated

D d(h6) H L Z Version
SF-P-Z4-D2.0-Z RT405
 2 6 6 50 4 A
SF-P-Z4-D3.0-Z RT405
 3 6 8 50 4 A
SF-P-Z4-D4.0-Z RT405
 4 6 11 50 4 A
SF-P-Z4-D5.0-Z RT405
 5 6 13 50 4 A
SF-P-Z4-D6.0-Z RT405
 6 6 16 50 4 B
SF-P-Z4-D8.0-Z RT405
 8 8 20 60 4 B
SF-P-Z4-D10.0-Z RT405
 10 10 25 75 4 B
SF-P-Z4-D12.0-Z RT405
 12 12 30 75 4 B
SF-P-Z4-D16.0-Z RT405     
 16 16 45 100 4 B

VHM Hard Ball Nose End Mill 4 Flutes - Prisma-Line | Rinaldi-Tools
Rinaldi-Tools GmbH

Solid Carbide Ball Nosed Hard Cutter - 4 Flutes - Prisma-Line

Price ab €17.50
Availability: 2147483618 In Stock

Mill Type Solid Carbide Ball Nose Hard Cutter
Helix Angle 30°
Workpiece Material Hard Materials uo to 68 HRC
Lenght Standard Length
Shank Cylindrical Shank
Flutes 4
Grade RT555: PVD-coated carbide substrate for the
Hard machining of steel (up to HRC 55-68).
Highest wear resistance and toughness
Packaging unit 1 Pc. / Set 5 Pc.

 Eckfräsen    

 

- 4-Flute Solid Carbide Ball Nose Cutter
- Centre Cutting
- PVD-coated 

D r d(h6) H L Z Version
HKF-P-Z4-D3.0 RT555
 3 1,5 6 6 50 4 A
HKF-P-Z4-D4.0 RT555
 4 2 6 8 50 4 A
HKF-P-Z4-D5.0 RT555
 5 2,5 6 10 50 4 A
HKF-P-Z4-D6.0 RT555
 6 3 6 12 50 4 B
HKF-P-Z4-D8.0 RT555
 8 4 8 16 60 4 B
HKF-P-Z4-D10.0 RT555
 10 5 10 20 75 4 B
HKF-P-Z4-D12.0 RT555
 12 6 12 24 75 4 B
HKF-P-Z4-D16.0 RT555
 16 8 16 32 100 4 B
HKF-P-Z4-D20.0 RT555 20 10 20 40 100 4 B

Solid Carbide Hard Milling Cutter up to 68 HRC - Long Version - Prisma-Line
Rinaldi-Tools GmbH

Solid Carbide Hard Milling Cutter up to 68 HRC - Long Version - Prisma-Line

Price ab €14.90
Availability: 214748364 In Stock

Mill Type Solid Carbide Hard Milling Cutter
Helix Angle 45°
Workpiece Material Hard Materials up to 68 HRC
Lenght Long Version
Shank Cylindrical Shank
Flutes 4
Grade RT555: PVD-coated carbide substrate for the
Hard machining of steel (up to HRC 55-68).
Highest wear resistance and toughness
Packaging unit 1 Pc / Set 5 Pc

 Eckfräsen 

 

- 4-Flute Solid Carbide Hard Milling Cutter 
- Centre Cutting
- PVD-Coated 

D d(h6) H L Z Version
HFL-P-Z4-D3.0 RT555 3 6 12 75 4 A
HFL-P-Z4-D4.0 RT555
 4 6 15 75 4 A
HFL-P-Z4-D5.0 RT555
 5 6 20 75 4 A
HFL-P-Z4-D6.0 RT555
 6 6 20 75 4 B
HFL-P-Z4-D8.0 RT555
 8 8 25 100 4 B
HFL-P-Z4-D10.0 RT555
 10 10 30 100
 4 B
HFL-P-Z4-D12.0 RT555
 12 12 35 100
 4 B
HFL-P-Z4-D16.0 RT555
 16 16 50 150 4 B
HFL-P-Z4-D20.0 RT555
 20 20 55 150 4 B

Solid Carbide Torus Cutter Long Version
Rinaldi-Tools GmbH

Solid Carbide Torus Cutter Long Version

Price ab €19.90
Availability: 2147483640 In Stock

Mill Type Solid Carbide Torus Cutter
Helix Angle 30°
Workpiece Material Steel, Stainless Steel, Cast Iron
Lenght Long Version
Shank Cylindrical shank
Flutes 4
Grade RT405: PVD-TIALN-coated high-performance grade
for solid carbide milling cutters
Packaging unit 1 Pc

 Eckfräsen     

  

- 4-Flute Solid Carbide Torus Cutter 
- Centre Cutting
- PVD-TIALN-Coated

D r d(h6) H L Z
TFRL-Z4-D6.0-R0.5 RT405 6 0,5 6 16 75 4
TFRL-Z4-D6.0-R1.0 RT405 6 1 6 16 75 4
TFRL-Z4-D8.0-R0.5 RT405 8 0,5 8 20 100 4
TFRL-Z4-D8.0-R1.0 RT405 8 1 8 20 100 4
TFRL-Z4-D10.0-R0.5 RT405 10 0,5 10 25 100 4
TFRL-Z4-D10.0-R1.0 RT405 10 1 10 25 100 4
TFRL-Z4-D10.0-R2.0 RT405 10 2 10 25 100 4
TFRL-Z4-D12.0-R0.5 RT405 12 0,5 12 30 100 4
TFRL-Z4-D12.0-R1.0 RT405 12 1 12 30 100 4
TFRL-Z4-D12.0-R2.0 RT405 12 2 12 30 100 4
TFRL-Z4-D16.0-R1.0 RT405 16 1 16 45 150 4
TFRL-Z4-D16.0-R2.0 RT405 16 2 16 45 150 4

VHM Hard End Mill 68 HRC Long Version - Prisma-Line | Rinaldi-Tools
Rinaldi-Tools GmbH

Solid Carbide Ball Nose Hard Cutter up to 68 HRC - Long Version - Prisma-Line

Price ab €17.90
Availability: 214748361 In Stock

Mill Type Solid Carbide Ball Nose Hard Cutter
Helix Angle 35°
Workpiece Material Hard Materials up to 68 HRC
Lenght Long Version
Shank Cylindrical Shank
Flutes 2
Grade RT555: PVD-coated carbide substrate for the
Hard machining of steel (up to HRC 55-68).
Highest wear resistance and toughness
Packaging unit 1 Pc. / Set 5 Pc.

 Eckfräsen    

 

- 2-Flute Solid Carbide Ball Nose Cutter 
- Centre Cutting
- PVD-coated 

D r d(h6) H L Z Version
HKFL-P-Z2-D2.0 RT555 2 1 6 4 75 2 A
HKFL-P-Z2-D2.5 RT555
 2,5 1,25 6 6 75 2 A
HKFL-P-Z2-D3.0 RT555
 3 1,5 6 6 75 2 A
HKFL-P-Z2-D3.5 RT555
 3,5 1,75 6 8 75 2 A
HKFL-P-Z2-D4.0 RT555
 4 2 6 8 75 2 A
HKFL-P-Z2-D5.0 RT555
 5 2,5 6 10 75 2 A
HKFL-P-Z2-D6.0 RT555
 6 3 6 12 75 2 B
HKFL-P-Z2-D8.0 RT555
 8 4 8 16 75 2 B
HKFL-P-Z2-D10.0 RT555
 10 5 10 20 100 2 B
HKFL-P-Z2-D12.0 RT555
 12 6 12 24 100 2 B
HKFL-P-Z2-D16.0 RT555
 16 8 16 32 150 2 B
HKFL-P-Z2-D20.0 RT555
 20 10 20 40 150 2 B