Error!

VHM-Fasfräser 60°
VHM-Fasfräser 60°
    VHM-Fasfräser 60°
    VHM-Fasfräser 60°

VHM-Fasfräser 60°

€11.50
Tax excluded
Typ
Quantity

Mill Type Solid Carbide Chamfer Mill 
Angle 60°
Workpiece Materials Steel, Stainless Steel,  Cast Iron, NF-Materials
Grade RT303: PVD-coated fine-grain carbide
for general Application in milling (VHM)
Packaging unit 1 Pc.

   

  d(h6) L D Shank X Z
FF-Z3-60-D3.0 RT303 3 48 0,2 Cylindrical 60° 3
FF-Z4-60-D4.0 RT303 4 48 0,2 Cylindrical 60° 4
FF-Z4-60-D6.0 RT303 6 55 0,2
 Weldon
 60° 4
FF-Z4-60-D8.0 RT303 8 58 0,5
 Weldon
 60°
 4
FF-Z4-60-D10.0 RT303 10 65 0,5
 Weldon
 60°
 4
FF-Z6-60-D10.0 RT303 10 65 0,7
 Weldon
 60°
 6
FF-Z4-60-D12.0 RT303 12 75 0,5
 Weldon
 60° 4
FF-Z6-60-D12.0 RT303 12 75 0,7 Weldon 60° 6
FF-Z4-60-D16.0 RT303 16 85 0,7 Weldon 60° 4
FF-Z6-60-D16.0 RT303 16 85 0,7 Weldon 60° 6

Mill Type Solid Carbide Chamfer Mill 
Angle 60°
Workpiece Material Steel, Stainless Steel,  Cast Iron, NF-Materials
Grade RT303: PVD-coated fine-grain carbide
for general Application in milling (VHM)
Packaging unit 1 Pc.

   

  Item Nr. d(h6) L D Shank X Z
FF-Z3-60-D3.0 RT303 2551681 3 48 0,2 Cylindrical 60° 3
FF-Z4-60-D4.0 RT303 2551682 4 48 0,2 Cylindrical 60° 4
FF-Z4-60-D6.0 RT303 2551683 6 55 0,2
 Weldon
 60° 4
FF-Z4-60-D8.0 RT303 2551684 8 58 0,5
 Weldon
 60°
 4
FF-Z4-60-D10.0 RT303 2551685 10 65 0,5
 Weldon
 60°
 4
FF-Z6-60-D10.0 RT303 2551686 10 65 0,7
 Weldon
 60°
 6
FF-Z4-60-D12.0 RT303 2551687 12 75 0,5
 Weldon
 60° 4
FF-Z6-60-D12.0 RT303 2551688 12 75 0,7 Weldon 60° 6
FF-Z4-60-D16.0 RT303 2551689 16 85 0,7 Weldon 60° 4
FF-Z6-60-D16.0 RT303 2551690 16 85 0,7 Weldon 60° 6

Cutting Data

Workpiece Material Tensile Strenth Cutting Speed Feed fz (mm/z)
(N/mm²) Ae Vc (m/min) Ø 3-5 Ø 6-8 Ø 10 Ø 12-16 Ø 20

Structural Steel

 <450 1/10 160-230 0,02-0,03 0,03-0,04 0,06 0,07-0,08 0,09

Tempered Steel

 450-700 1/10 130-170 0,02-0,03 0,03-0,04 0,06 0,07-0,08 0,09

Tooling Steel

 >700 1/10 120-160 0,02-0,03 0,03-0,04 0,06 0,07-0,08 0,09

Stainless Steel

 <1100 1/10 60-80 0,02 0,02-0,03 0,05 0,06 0,07

Cast Iron

 1/10 150-230 0,02-0,03 0,03-0,04 0,06 0,07-0,08 0,09

Aluminum/Aluminum-alloys (<12% Si.)

 <600 1/10 500-1200 0,03-0,05 0,05-0,06 0,09 0,11-0,12 0,14

Copper/Brass

 <600 1/10 250-500 0,03-0,05 0,05-0,06 0,09 0,11-0,12 0,14

Rinaldi-Tools GmbH
2551681

Data sheet

Materials
Cast Iron
NF-Metals
Stainless Steel
Steel
Solid carbide Mills
Chamfer Cutter

16 other products in the same category:

Solide Carbide Chamfer Mill 120°
Rinaldi-Tools GmbH

Solide Carbide Chamfer Mill 120°

Price ab €11.50
Availability: 214748364 In Stock

Mill Type Solid Carbide Chamfer Mill 
Angle 120°
Workpiece Material Steel, Stainless Steel,  Cast Iron, NF-Materials
Grade RT303: PVD-coated fine-grain carbide
for general Application in milling (VHM)
Packaging unit 1 Pc.

   

  d(h6) L D Shank X Teeth
FF-Z3-120-D3.0 RT303 3 48 0,2 Cylindrical 120° 3
FF-Z4-120-D4.0 RT303 4 48 0,2 Cylindrical 120° 4
FF-Z4-120-D6.0 RT303 6 55 0,2
 Weldon
 120° 4
FF-Z4-120-D8.0 RT303 8 58 0,5
 Weldon
 120°
 4
FF-Z4-120-D10.0 RT303 10 65 0,5
 Weldon
 120°
 4
FF-Z4-120-D12.0 RT303 12 75 0,5
 Weldon
 120°
 4
FF-Z4-120-D16.0 RT303 16 85 0,7
 Weldon
 120° 4

Solid Carbide HPC End Mill for Stainless Steel - Prisma-Line
Rinaldi-Tools GmbH

Solid Carbide HPC End Mill for Stainless Steel - Prisma-Line

Price ab €13.00
Availability: 2147483618 In Stock

Mill Type Solid Carbide HPC End Mill
Helix Angle 36/38°
Workpiece Material Stainless Steel
Lenght Standard Lenght
Shank Weldon Shank
Flutes 4
Grade RT350: PVD-coated M15-M30 and S15-S30 solid carbide for roughing and finishing of stainless steel.
Packaging unit 1 Pc / Set 5 Pc.

 Eckfräsen    

 

- 4-Flute Solid Carbide End Mill
- Centre Cutting

  D d H L Z Version
SFVA-P-Z4-D4.0 RT350 4 6 11 50 4 A
SFVA-P-Z4-D5.0 RT350 5 6 13 50 4 A
SFVA-P-Z4-D6.0 RT350 6 6 16 50 4 B
SFVA-P-Z4-D8.0 RT350 8 8 20 60 4 B
SFVA-P-Z4-D10.0 RT350 10 10 25 75 4 B
SFVA-P-Z4-D12.0 RT350 12 12 26 75 4 B
SFVA-P-Z4-D16.0 RT350 16 16 40 100 4 B

Solid Carbide Torus Cutter Long Version
Rinaldi-Tools GmbH

Solid Carbide Torus Cutter Long Version

Price ab €19.90
Availability: 2147483640 In Stock

Mill Type Solid Carbide Torus Cutter
Helix Angle 30°
Workpiece Material Steel, Stainless Steel, Cast Iron
Lenght Long Version
Shank Cylindrical shank
Flutes 4
Grade RT405: PVD-TIALN-coated high-performance grade
for solid carbide milling cutters
Packaging unit 1 Pc

 Eckfräsen     

  

- 4-Flute Solid Carbide Torus Cutter 
- Centre Cutting
- PVD-TIALN-Coated

D r d(h6) H L Z
TFR-Z4-D6.0-R0.5 RT405 6 0,5 6 16 75 4
TFR-Z4-D6.0-R1.0 RT405 6 1 6 16 75 4
TFR-Z4-D8.0-R0.5 RT405 8 0,5 8 20 100 4
TFR-Z4-D8.0-R1.0 RT405 8 1 8 20 100 4
TFR-Z4-D10.0-R0.5 RT405 10 0,5 10 25 100 4
TFR-Z4-D10.0-R1.0 RT405 10 1 10 25 100 4
TFR-Z4-D10.0-R2.0 RT405 10 2 10 25 100 4
TFR-Z4-D12.0-R0.5 RT405 12 0,5 12 30 100 4
TFR-Z4-D12.0-R1.0 RT405 12 1 12 30 100 4
TFR-Z4-D12.0-R2.0 RT405 12 2 12 30 100 4
TFR-Z4-D16.0-R1.0 RT405 16 1 16 45 150 4
TFR-Z4-D16.0-R2.0 RT405 16 2 16 45 150 4

Solid carbide titanium milling cutter with corner radius 5 flutes, long version
Rinaldi-Tools GmbH

Solid carbide titanium milling cutter with corner radius 5 flutes, long version

Price ab €26.20
Availability: 214748364 In Stock

Mill Typ Solid Carbide Titanium Mills with corner radius
Material Heat resistant super alloys
Processing Medium and finish
Lenght Long version
Shaft Cylindrical Shank
Flutes 5
Coating RT520: Modern coating technology
for high temperature resistance
Packaging unit 1 Pc.

 Eckfräsen    

- Centre Cutting

D d H L Z Radius (r)
TIFRL-Z5-D6.0-R0,3 RT520 6 6 13 57 5 0,3
TIFRL-Z5-D6.0-R0,5 RT520 6 6 13 57 5 0,5
TIFRL-Z5-D6.0-R1,0 RT520 6 6 13 57 5 1,0
TIFRL-Z5-D8.0-R0,5 RT520 8 8 19 63 5 0,5
TIFRL-Z5-D8.0-R1,0 RT520 8 8 19 63 5 1,0
TIFRL-Z5-D8.0-R1,5 RT520 8 8 19 63 5 1,5
TIFRL-Z5-D8.0-R2,0 RT520 8 8 19 63 5 2,0
TIFRL-Z5-D10.0-R0,5 RT520 10 10 22 72 5 0,5
TIFRL-Z5-D10.0-R1,0 RT520 10 10 22 72 5 1,0
TIFRL-Z5-D10.0-R1,5 RT520 10 10 22 72 5 1,5
TIFRL-Z5-D10.0-R2,0 RT520 10 10 22 72 5 2,0
TIFRL-Z5-D12.0-R0,5 RT520 12 12 26 83 5 0,5
TIFRL-Z5-D12.0-R1,0 RT520 12 12 26 83 5 1,0
TIFRL-Z5-D12.0-R1,5 RT520 12 12 26 83 5 1,5
TIFRL-Z5-D12.0-R2,0 RT520 12 12 26 83 5 2,0
TIFRL-Z5-D12.0-R2,5 RT520 12 12 26 83 5 2,5
TIFRL-Z5-D12.0-R3,0 RT520 12 12 26 83 5 3,0
TIFRL-Z5-D16.0-R1,0 RT520 16 16 36 92 5 1,0
TIFRL-Z5-D16.0-R1,5 RT520 16 16 36 92 5 1,5
TIFRL-Z5-D16.0-R2,0 RT520 16 16 36 92 5 2,0
TIFRL-Z5-D16.0-R2,5 RT520 16 16 36 92 5 2,5
TIFRL-Z5-D16.0-R3,0 RT520 16 16 36 92 5 3,0
TIFRL-Z5-D16.0-R4,0 RT520 16 16 36 92 5 4,0
TIFRL-Z5-D20.0-R1,0 RT520 20 20 44 104 5 1,0
TIFRL-Z5-D20.0-R1,5 RT520 20 20 44 104 5 1,5
TIFRL-Z5-D20.0-R2,0 RT520 20 20 44 104 5 2,0
TIFRL-Z5-D20.0-R2,5 RT520 20 20 44 104 5 2,5
TIFRL-Z5-D20.0-R3,0 RT520 20 20 44 104 5 3,0
TIFRL-Z5-D20.0-R4,0 RT520 20 20 44 104 5 4,0
TIFRL-Z5-D20.0-R5,0 RT520 20 20 44 104 5 5,0
TIFRL-Z5-D25.0-R1,0 RT520 25 25 54 121 5 1,0
TIFRL-Z5-D25.0-R1,5 RT520 25 25 54 121 5 1,5
TIFRL-Z5-D25.0-R2,0 RT520 25 25 54 121 5 2,0
TIFRL-Z5-D25.0-R2,5 RT520 25 25 54 121 5 2,5
TIFRL-Z5-D25.0-R3,0 RT520 25 25 54 121 5 3,0
TIFRL-Z5-D25.0-R4,0 RT520 25 25 54 121 5 4,0
TIFRL-Z5-D25.0-R5,0 RT520 25 25 54 121 5 5,0

Solid Carbide End Mill for NF-Materials - 3 Flutes - Long Version (DLC)
Rinaldi-Tools GmbH

Solid Carbide End Mill for NF-Materials - 3 Flutes - Long Version (DLC)

Price ab €27.60
Availability: 214748364 In Stock

Mill Type Solid Carbide End Mill (DLC)
Helix Angle 37°
Workpiece Material NF-Materials
Lenght Long Version
Shank Cylindrical Shank
Flutes 3
Grade RT107: The DLC coating (Diamond-Like Carbon) made of diamond-like carbon ensures lower wear.
Packaging unit 1 Pc

 Eckfräsen    

 

- Centre Cutting

D d H L Z
AFL-Z3-D6.0 RT107 6,0 6 24 75 3
AFL-Z3-D8.0 RT107 8,0 8 32 75 3
AFL-Z3-D10.0 RT107 10,0 10 40 100 3
AFL-Z3-D12.0 RT107 12,0 12 48
 100 3
AFL-Z3-D16.0 RT107 16,0 16 64 125
 3
AFL-Z3-D20.0 RT107 20,0 20 80
 150
 3
AFL-Z3-D25.0 RT107 25,0 25 50 125 3

Solid Carbide End Mill for Aluminum - Long Version
Rinaldi-Tools GmbH

Solid Carbide End Mill for Aluminum - Long Version

Price ab €12.90
Availability: 2147483634 In Stock

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 45°
Workpiece Material NF-Materials
Lenght Long Version
Shank Cylindrical Shank
Flutes 3
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen        

 

- 3-Flute Solid Carbide End Mill
- Centre Cutting

  D d(h6) H L Z Version
AFL-Z3-D3.0 RT30K 3 6 12 60 3 A
AFL-Z3-D4.0 RT30K 4 6 16 60 3 A
AFL-Z3-D5.0 RT30K 5 6 20 60 3 A
AFL-Z3-D6.0 RT30K 6 6 25 75 3 B
AFL-Z3-D8.0 RT30K 8 8 32 75
 3
 B
AFL-Z3-D10.0 RT30K 10 10 45 100
 3
 B
AFL-Z3-D12.0 RT30K 12 12 45 100
 3
 B
AFL-Z3-D16.0 RT30K 16 16 65 150
 3
 B
AFL-Z3-D20.0 RT30K 20 20 75 150 3 B

Solid Carbide Ball Nose Cutter for NF-Materials
Rinaldi-Tools GmbH

Solid Carbide Ball Nose Cutter for NF-Materials

Price ab €17.90
Availability: 214748364 In Stock

Mill Type Solid Carbide Ball Nose Cutter 
Helix Angle 30°
Workpiece Material NF-Materials
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 2
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc

  Eckfräsen      

 

- 2-Flute Solid Carbide Ball Nose Cutter
- Centre Cutting

  D r d2(h6) d1 H M L Z
AKF-Z2-D3.0 RT30K 3 1,5 6 2,8 6 9 57 2
AKF-Z2-D4.0 RT30K 4 2 6 3,7 8 12 57 2
AKF-Z2-D5.0 RT30K 5 2,5 6 4,6 10 15 57 2
AKF-Z2-D6.0 RT30K 6 3 6 5,5 12 20 57 2
AKF-Z2-D8.0 RT30K 8 4 8 7,4 16 26 63 2
AKF-Z2-D10.0 RT30K 10 5 10 9,2 20 31 72 2
AKF-Z2-D12.0 RT30K 12 6 12 11 24 37 83 2
AKF-Z2-D16.0 RT30K 16 8 16 15 32 43 92 2

Solid Carbide Ball Nose Hard Milling Cutter up to 68 HRC - Prisma-Line
Rinaldi-Tools GmbH

Solid Carbide Ball Nose Hard Milling Cutter up to 68 HRC - Prisma-Line

Price ab €14.90
Availability: 2147483618 In Stock

Mill Type Solid Carbide Ball Nose Hard Milling Cutter
Helix Angle 35°
Workpiece Material Hard Materials up to 68 HRC
Lenght Standard Length
Shank Cylindrical Shank
Flutes 2
Grade RT555: PVD-coated carbide substrate for the
Hard machining of steel (up to HRC 55-68).
Highest wear resistance and toughness
Packaging unit 1 Pc. / Set 5 Pc.

 Eckfräsen    

 

- 2-Flute Solid Carbide Ball Nose Hard Milling Cutter  
- Centre Cutting
- PVD-Coated 

 

r D d(h6) H L Z Version
HKF-P-Z2-D1.5 RT555 0,75 1,5 4 3 50 2 A
HKF-P-Z2-D2.0 RT555 1 2 6 4 50 2 A
HKF-P-Z2-D2.5 RT555
 1,25 2,5 6 5 50 2 A
HKF-P-Z2-D3.0 RT555
 1,5 3 6 6 50 2 A
HKF-P-Z2-D3.5 RT555 1,75 3,5 6 8 50 2 A
HKF-P-Z2-D4.0 RT555
 2 4,0 6 8 50 2 A
HKF-P-Z2-D5.0 RT555
 2,5 5,0 6 10 50 2 A
HKF-P-Z2-D6.0 RT555
 3 6 6 12 50 2 B
HKF-P-Z2-D8.0 RT555
 4 8 8 16 60 2 B
HKF-P-Z2-D10.0 RT555
 5 10 10 20 75 2 B
HKF-P-Z2-D12.0 RT555
 6 12 12 24 75 2 B
HKF-P-Z2-D16.0 RT555
 8 16 16 32 100 2 B
HKF-P-Z2-D20.0 RT555
 10 20 20 40 100 2 B

Solid Carbide Ball Nose Cutter - 4 Flutes - Prisma-Line
Rinaldi-Tools GmbH

Solid Carbide Ball Nose Cutter - 4 Flutes - Prisma-Line

Price ab €9.80
Availability: 2147483618 In Stock

Mill Type Solid Carbide Ball Nose Cutter
Helix Angle 30°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Finish
Lenght Standard Length
Shank Cylindrical Shank
Flutes 4
Grade RT303: PVD-coated fine-grain carbide for general Application in milling (VHM)
Packaging unit 1 Pc. / Set 5 Pc.

 Eckfräsen    

   

- 4-Flute Solid Carbide Ball Nose Cutter 
- Centre Cutting
- PVD-Coated

D r d(h6) H L Z Version
KF-P-Z4-D4.0 RT303
 4 2 6 8 50 4 A
KF-P-Z4-D5.0 RT303
 5 2,5 6 10 50 4 A
KF-P-Z4-D6.0 RT303
 6 3 6 12 50 4 B
KF-P-Z4-D8.0 RT303
 8 4 8 16 60 4 B
KF-P-Z4-D10.0 RT303
 10 5 10 20 75 4 B
KF-P-Z4-D12.0 RT303
 12 6 12 24 75 4 B

Solid Carbide Undersize Milling Cutter
Rinaldi-Tools GmbH

Solid Carbide Undersize Milling Cutter

Price ab €11.00
Availability: 2147483607 In Stock

Mill Type Solid Carbide Undersize Milling Cutter
Helix Angle 30°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Medium
Lenght Standard Lenght
Shank Weldon-Shank
Flutes 2
Grade RT405: PVD-coated fine-grain carbide for general Application in milling (VHM)
Packaging unit 1 Pc

 Eckfräsen    

   

- 2-Flute Solid Carbide Undersize Cutter
- Centre Cutting
- PVD-Coated

  D d(h6) H L Z
2,8 2,8 6 7 57 2
3,8 3,8 6 8 57 2
4,8 4,8 6 8 57 2
5,75 5,75 6 10 57 2
7,75 7,75 8 16 63 2
8,7 8,7 10 16 72 2
11,7 11,7 12 22 83 2
13,7 13,7 14 22 83 2
15,7 15,7 16 26 92 2

Solid Carbide End Mill Corner Radius (DLC)
Rinaldi-Tools GmbH

Solid Carbide End Mill Corner Radius (DLC)

Price ab €23.90
Availability: 214748364 In Stock

Mill Type Solid Carbide End mill with Corner radius (DLC)
Helix Angle 37°
Workpiece Material NF-Materials
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 3
Grade RT107: The DLC coating (Diamond-Like Carbon) made of diamond-like carbon ensures lower wear.
Packaging unit 1 Pc

 Eckfräsen     

 

- Centre Cutting

D r d H L Z
AF-Z3-D6.0-R0,5 RT107 6 R0,5 6 13 57 3
AF-Z3-D6.0-R1,0 RT107 6 R1,0 6 13 57 3
AF-Z3-D6.0-R1,5 RT107 6 R1,5 6 13 57 3
AF-Z3-D8.0-R0,3 RT107 8 R0,3 8 19 63 3
AF-Z3-D8.0-R0,5 RT107 8 R0,5 8 19
 63 3
AF-Z3-D8.0-R1,0 RT107 8 R1,0 8 19 63 3
AF-Z3-D8.0-R1,5 RT107 8 R1,5 8 19
 63
 3
AF-Z3-D10.0-R0,3 RT107 10 R0,3 10 22
 72
 3
AF-Z3-D10.0-R0,5 RT107 10 R0,5 10 22
 72
 3
AF-Z3-D10.0-R1,0 RT107 10 R1,0 10 22 72 3
AF-Z3-D10.0-R1,5 RT107 10 R1,5 10 22 72 3
AF-Z3-D12.0-R1,5 RT107 12 R1,5 12 26 83 3
AF-Z3-D12.0-R2,0 RT107 12 R2,0 12 26 83 3
AF-Z3-D12.0-R2,5 RT107 12 R2,5 12 26 83 3
AF-Z3-D12.0-R3,0 RT107 12 R3,0 12 26 83 3
AF-Z3-D16.0-R1,5 RT107 16 R1,5 16 32 92 3
AF-Z3-D16.0-R2,0 RT107 16 R2,0 16 32 92 3
AF-Z3-D16.0-R2,5 RT107 16 R2,5 16 32 92 3
AF-Z3-D16.0-R3,0 RT107 16 R3,0 16 32 92 3
AF-Z3-D16.0-R4,0 RT107 16 R4,0 16 32 92 3
AF-Z3-D20.0-R2,0 RT107 20 R2,0 20 38 104 3
AF-Z3-D20.0-R2,5 RT107 20 R2,5 20 38 104 3
AF-Z3-D20.0-R3,0 RT107 20 R3,0 20 38 104 3
AF-Z3-D20.0-R4,0 RT107 20 R4,0 20 38 104 3

Solide Carbide Chamfer Mills 90°
Rinaldi-Tools GmbH

Solide Carbide Chamfer Mills 90°

Price ab €13.50
Availability: 2147483466 In Stock

Mill Type Solid Carbide Chamfer Mill 
Angle 90°
Workpiece Material Steel, Stainless Steel,  Cast Iron, NF-Materials
Shank Weldon/Cylinder Shaft
Grade RT303: PVD-coated fine-grain carbide
for general Application in milling (VHM)
Packaging unit 1 Pc.

   

Cylindrical Shank

d(h6) L D Z
FF-Z3-90-D3.0-Z RT303 3 48 0,2 3
FF-Z4-90-D4.0-Z RT303 4 48 0,2 4
FF-Z4-90-D6.0-Z RT303 6 55 0,2 4
FF-Z4-90-D8.0-Z RT303 8 58 0,5 4
FF-Z4-90-D10.0-Z RT303 10 65 0,5 4
FF-Z4-90-D12.0-Z RT303 12 75 0,5 4
FF-Z4-90-D16.0-Z RT303  16 85 0,7 4

Weldon-Shank

d(h6) L D Z
FF-Z3-90-D3.0-W RT303 3 48 0,2 3
FF-Z4-90-D4.0-W RT303 4 48 0,2 4
FF-Z4-90-D6.0-W RT303 6 55 0,2 4
FF-Z4-90-D8.0-W RT303 8 58 0,5 4
FF-Z4-90-D10.0-W RT303 10 65 0,5 4
FF-Z4-90-D12.0-W RT303 12 75 0,5 4
FF-Z4-90-D16.0-W RT303 16 85 0,7 4

Solid Carbide Ball Nose Hard Cutter up to 68 HRC - Long Version - Prisma-Line
Rinaldi-Tools GmbH

Solid Carbide Ball Nose Hard Cutter up to 68 HRC - Long Version - Prisma-Line

Price ab €17.90
Availability: 214748364 In Stock

Mill Type Solid Carbide Ball Nose Hard Cutter
Helix Angle 35°
Workpiece Material Hard Materials up to 68 HRC
Lenght Long Version
Shank Cylindrical Shank
Flutes 2
Grade RT555: PVD-coated carbide substrate for the
Hard machining of steel (up to HRC 55-68).
Highest wear resistance and toughness
Packaging unit 1 Pc. / Set 5 Pc.

 Eckfräsen    

 

- 2-Flute Solid Carbide Ball Nose Cutter 
- Centre Cutting
- PVD-coated 

D r d(h6) H L Z Version
HKFL-P-Z2-D2.0 RT555 2 1 6 4 75 2 A
HKFL-P-Z2-D2.5 RT555
 2,5 1,25 6 6 75 2 A
HKFL-P-Z2-D3.0 RT555
 3 1,5 6 6 75 2 A
HKFL-P-Z2-D3.5 RT555
 3,5 1,75 6 8 75 2 A
HKFL-P-Z2-D4.0 RT555
 4 2 6 8 75 2 A
HKFL-P-Z2-D5.0 RT555
 5 2,5 6 10 75 2 A
HKFL-P-Z2-D6.0 RT555
 6 3 6 12 75 2 B
HKFL-P-Z2-D8.0 RT555
 8 4 8 16 75 2 B
HKFL-P-Z2-D10.0 RT555
 10 5 10 20 100 2 B
HKFL-P-Z2-D12.0 RT555
 12 6 12 24 100 2 B
HKFL-P-Z2-D16.0 RT555
 16 8 16 32 150 2 B
HKFL-P-Z2-D20.0 RT555
 20 10 20 40 150 2 B

Solid Carbide End Mill for Aluminum - Prisma-Line
Rinaldi-Tools GmbH

Solid Carbide End Mill for Aluminum - Prisma-Line

Price ab €9.00
Availability: 2147483618 In Stock

Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 35°
Workpiece Material NF-Materials
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 3
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc / Set 5 Pc.

 Eckfräsen    

 

- 3-Flute Solid Carbide End Mill 
- Centre Cutting

  D d H L Z Version
AF-P-Z3-D3.0 RT30K 3 6 9 50 3 A
AF-P-Z3-D4.0 RT30K 4 6 10 50 3 A
AF-P-Z3-D5.0 RT30K 5 6 13 50 3 A
AF-P-Z3-D6.0 RT30K 6 6 16 50 3 B
AF-P-Z3-D8.0 RT30K 8 8 20 60 3 B
AF-P-Z3-D10.0 RT30K 10 10 25 75 3 B
AF-P-Z3-D12.0 RT30K 12 12 30 75 3 B
AF-P-Z3-D16.0 RT30K 16 16 36 100 3 B
AF-P-Z3-D20.0 RT30K 20 20 45 100 3 B
Solid Carbide Aluminum Roughing Mill - 3 Flutes
Rinaldi-Tools GmbH

Solid Carbide Aluminum Roughing Mill - 3 Flutes

Price ab €24.90
Availability: 214748364 In Stock

Mill Typ Solid Carbide roughing mill for Aluminum
Spiral Angle 30°
Material NF-Materials
Processing Roughing
Shaft Cylinder Shaft
Flutes 3
Grade RT30K: Uncoated K30 carbide substrate
for processing non-ferrous metals
Packaging unit 1 Pc

   Eckfräsen   

 

- Centre Cutting

D d H L Corner bevel
AFR-Z3-D6.0 RT30K 6,0 6 16 57 0,60
AFR-Z3-D7.0 RT30K 7,0 8 16 63 0,60
AFR-Z3-D8.0 RT30K 8,0 8 16 63 0,60
AFR-Z3-D9.0 RT30K
 9,0 10 19 72 0,60
AFR-Z3-D10.0 RT30K 10,0 10 22 72 0,60
AFR-Z3-D12.0 RT30K
 12,0 12 26 83 0,60
AFR-Z3-D14.0 RT30K 14,0 14 26 83 0,91
AFR-Z3-D16.0 RT30K 16,0 16 32 92 0,91
AFR-Z3-D18.0 RT30K 18,0 18 32 92 0,91
AFR-Z3-D20.0 RT30K 20,0 20 38 104 0,91
AFR-Z3-D25.0 RT30K 25,0 25 45 121 0,91

Solid Carbide Hard Milling Cutter up to 68 HRC - Prisma-Line
Rinaldi-Tools GmbH

Solid Carbide Hard Milling Cutter up to 68 HRC - Prisma-Line

Price ab €11.60
Availability: 214748364 In Stock

Mill Type Solid Carbide Hard Milling Cutter
Helix Angle 45°
Workpiece Material Hard Materials up to 68 HRC
Lenght Standard Length
Shank Cylindrical Shank
Flutes 4
Grade RT555: PVD-coated carbide substrate for the
Hard machining of steel (up to HRC 55-68).
Highest wear resistance and toughness
Packaging unit 1 Pc / Set 5 Pc

  Eckfräsen 

 

- 4-Flute Solid Carbide Hard Milling Cutter 
- Centre Cutting
- PVD-Coated

D d(h6) H L Z Version
HF-P-Z4-D1.0 RT555 1 6 3 50 4 A
HF-P-Z4-D2.0 RT555
 2 6 6 50 4 A
HF-P-Z4-D3.0 RT555
 3 6 8 50
 4 A
HF-P-Z4-D3.5 RT555 3,5 6 10 50 4 A
HF-P-Z4-D4.0 RT555
 4 6 11 50 4 A
HF-P-Z4-D5.0 RT555
 5 6 13 50 4 A
HF-P-Z4-D5.5 RT555
 5,5 6 16 50 4 A
HF-P-Z4-D6.0 RT555
 6 6 16 50 4 B
HF-P-Z4-D8.0 RT555
 8 8 20 60 4 B
HF-P-Z4-D10.0 RT555
 10 10 25 75 4 B
HF-P-Z4-D12.0 RT555
 12 12 30 75 4 B
HF-P-Z4-D14.0 RT555
 14 14 32 75 4 B
HF-P-Z4-D16.0 RT555
 16 16 45 100 4 B
HF-P-Z4-D20.0 RT555
 20 20 45 100 4 B