| Grooving Holder | KER/L |
| Application | Outside Grooving |
| Grooving System | Z-System |
| Packaging Unit | 1 Pc. |
| W | H | t max | L | b | |
| KER/L-2.0-10-H | 2,0 | 30 | 10 | 45 | 9 |
| KER/L-2.5-15-H | 2,5 | 30 | 15 | 50 | 9 |
| KER/L-3.0-15-H | 3,0 | 30 | 15 | 55 | 9 |
| KER/L-3.0-25-H | 3,0 | 30 | 25 | 55 | 9 |
| KER/L-4.0-20-H | 4,0 | 30 | 20 | 55 | 9 |
| KER/L-5.0-25-H | 5,0 | 30 | 25 | 55 | 9 |
| KER/L-6.0-25-H | 6,0 | 30 | 25 | 55 | 9 |
| KER/L-8.0-30-H | 8,0 | 30 | 30 | 55 | 9 |
| Shape | CNMG |
| Processing | Finish |
| Cutting condition | Continuous |
| Workpiece Material | Steel and Stainless Steel |
| Grade | RTC+: PVD coated P05-P15 Cermet grade for finishing of steel and stainless steel |
| Packaging unit | 10 Pc. |
| r | L | I.C. | S | |
| CNMG 090304-SF RTC+ | 0,4 | 9,7 | 9,525 | 3,18 |
| CNMG 120404-SF RTC+ | 0,4 | 12,9 | 12,7 | 4,76 |
| CNMG 120408-SF RTC+ | 0,8 | 12,9 | 12,7 | 4,76 |
| Shape | TNMG |
| Processing | Finish |
| Cutting conditions | Continuous |
| Workpiece Material | Stainless Steel |
| Grade | RT305: PVD grade M20-M30 for stainless steel with the most modern coating |
| Packaging unit | 10 Pc. |
| r | L | I.C | S | d | |
| TNMG 160404-FE RT305 | 0,4 | 16,5 | 9,525 | 4,76 | 3,81 |
| TNMG 160408-FE RT305 | 0,8 | 16,5 | 9,525 | 4,76 | 3,81 |
| TNMG 160412-FE RT305 | 1,2 | 16,5 | 9,525 | 4,76 | 3,81 |
| Boring Bar | SCLCR/L |
| Cutting Angle | 95° |
| Insert | CC.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Screw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
consisting of:
| d | H | L | f | Dmin | |
| 1x S0608H SCLCR/L 06 | 8 | 7 | 100 | 05 | ≥8 Neck Diameter 6mm |
| 1x S08H SCLCR/L 06 | 8 | 7 | 100 | 07 | ≥11 |
| 1x S10K SCLCR/L 06 | 10 | 9 | 125 | 08 | ≥13 |
| 1x S12K SCLCR/L 06 | 12 | 11 | 125 | 10 | ≥16 |
| Tool | Interchangeable tip drill |
| Diameter | For Inserts 22,00-22,90 mm |
| Types | 3xD/5xD/8xD |
| Packaging unit | 1 Pc |
Please pay attention to the Holder/drill bit combinations!
Only drill bits with a diameter of 22,00-22,90 mm fit on these supports.
| Drill Lenght | Diameter | D2 | L2 | D3 | L1 | L3 | |
| WST D22.0-3xD-H | 3xD | 22,00 - 22,90 mm | 25 | 56 | 32 | 69,0 | 153,4 |
| WST D22.0-5xD-H | 5xD | 22,00 - 22,90 mm | 25 | 56 | 32 | 115,0 | 198,4 |
| WST D22.0-8xD-H | 8xD | 22,00 - 22,90 mm | 25 | 56 | 32 | 184,0 | 265,9 |
| Boring Bar Set | E-SDQCR/L |
| Setting Angle | 107,5° |
| Insert | DC.. |
| Main application | Profile turning |
| Clamping | Screw Clamp |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
Solid carbide boring bar
Solid carbide tool carriers increase stability considerably.
The carbide boring bar allows a projection length of up to 6xD by reducing vibrations.
Precision and surface quality are also improved.
Art. Nr. Right: SM59931
Art. Nr. Left: SM59948
consisting of:
| d | L | f | D/min | |
| E10M SDQCR/L-07 | 10 | 150 | 8 | ≥13 |
| E12Q SDQCR/L-07 | 12 | 180 | 10 | ≥16 |
| E16R SDQCR/L-11 |
16 | 200 | 13 | ≥21 |
| Shape | DNMG |
| Processing | Roughing/Medium |
| Cutting condition | Continuous and light interrupted |
| Workpiece Material | Stainless Steel |
| Grade | RT305: PVD grade M20-M30 for stainless steel with the most modern coating |
| Packaging unit | 10 Pc. |
| r | L | I.C | S | d | |
| DNMG 150604-R RT305 | 0,4 | 15,5 | 12,7 | 6,35 | 5,16 |
| DNMG 150604-L RT305 | 0,4 | 15,5 | 12,7 | 6,35 | 5,16 |
| DNMG 150608-R RT305 | 0,8 | 15,5 | 12,7 | 6,35 | 5,16 |
| DNMG 150608-L RT305 | 0,8 | 15,5 | 12,7 | 6,35 | 5,16 |
| Tool | Interchangeable tip drill |
| Diameter | For Inserts 12,50-12,90 mm |
| Types | 3xD/5xD/8xD |
| Packaging unit | 1 Pc |
Please pay attention to the Holder/drill bit combinations!
Only drill bits with a diameter of 12,50-12,90 mm fit on these supports.
| Drill Lenght | Diameter | D2 | L2 | D3 | L1 | L3 | |
| WST D12.5-3xD-H | 3xD | 12,50 - 12,90 mm | 16 | 48 | 23 | 39,0 | 110,8 |
| WST D12.5-5xD-H | 5xD | 12,50 - 12,90 mm | 16 | 48 | 23 | 65,0 | 135,8 |
| WST D12.5-8xD-H | 8xD | 12,50 - 12,90 mm | 16 | 48 | 23 | 104,0 | 173,8 |
| Plate Shape | VBGW |
| Processing | High Speed Alu Turning |
| Material | Aluminum, NF-Materials |
| Coating | RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic |
| Packaging unit | 2 Pc. |
PCD = Polycrystalline diamond (PCD) is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix.
| r | L | I.C | S | d | |
| VBGW 160402-1N RTD10 | 0,2 | 2,5 | 9,525 | 4,76 | 4,4 |
| VBGW 160404-1N RTD10 | 0,4 | 2,5 | 9,525 | 4,76 | 4,4 |
| VBGW 160408-1N RTD10 | 0,8 | 2,5 | 9,525 | 4,76 | 4,4 |
| Shape | RCMT |
| Processing | Medium |
| Cutting conditions | Continuous and light interrupted |
| Workpiece Material | Steel |
| Grade 08-12 | RT250+: CVD-coated 2-color coated P20-P30 carbide for steel |
| Grade 16-20 | RT250P: CVD-coated P25-TiALN grade for steel (turning) |
| Packaging unit | 10 Pc. |
| L | I.C | S | d | |
|---|---|---|---|---|
| RCMT0803MO RT250+ | 8 | 8 | 3,18 | 3,36 |
| RCMT10T3MO RT250+ | 10 | 10 | 3,97 | 3,6 |
| RCMT1204MO RT250+ | 12 | 12 | 4,76 | 4,44 |
| RCMT1606MO RT250P | 16 | 16 | 6,35 | 5,5 |
| RCMT2006MO RT250P | 20 | 20 | 6,35 | 6,5 |
| Tool | Interchangeable tip drill |
| Diameter | For Inserts 20,00-20,90 mm |
| Types | 3xD/5xD/8xD |
| Packaging unit | 1 Pc |
Please pay attention to the Holder/drill bit combinations!
Only drill bits with a diameter of 20,00-20,90 mm fit on these supports.
| Drill Lenght | Diameter | D2 | L2 | D3 | L1 | L3 | |
| WST D20.0-3xD-H | 3xD | 20,00 - 20,90 mm | 25 | 56 | 32 | 63,0 | 147,5 |
| WST D20.0-5xD-H | 5xD | 20,00 - 20,90 mm | 25 | 56 | 32 | 105,0 | 188,5 |
| WST D20.0-8xD-H | 8xD | 20,00 - 20,90 mm | 25 | 56 | 32 | 168,0 | 250,0 |
| Shape | VBMT |
| Processing | Medium |
| Cutting conditions | Continuous and light interrupted |
| Workpiece Material | Steel |
| Grade | RT250+: CVD-coated 2-color coated P20-P30 carbide for steel |
| Packaging unit | 10 Pc. |
| r | L | I.C. | S | d | |
| VBMT 160404-PM RT250+ | 0,4 | 16,5 | 9,525 | 4,76 | 4,4 |
| VBMT 160408-PM RT250+ | 0,8 | 16,5 | 9,525 | 4,76 | 4,4 |
| VBMT 160412-PM RT250+ | 1,2 | 16,5 | 9,525 | 4,76 | 4,4 |
| Grooving Holder | GTN Blade |
| Application | Parting |
| Grooving System | GTN-System |
| Grooving Insert | GTN RT300/RT100 |
| Packaging Unit | 1 Pc. |
| H | B | L | h | |
| GTN Blade 26-2 | 26 | 1,6 | 110 | 21 |
| GTN Blade 32-2 | 32 | 1,6 | 150 | 25 |
| GTN Blade 26-3 | 26 | 2,4 | 110 | 21 |
| GTN Blade 32-3 | 32 | 2,4 | 150 | 25 |
| GTN Blade 32-4 | 32 | 3,2 | 150 | 25 |
| GTN Blade 32-5 | 32 | 4,0 | 150 | 25 |
| Boring Bar | SVJBR/L |
| Cutting Angle | 93° |
| Insert | VBMT 1604... |
| Main application | Profiling |
| Clamping | Screw Clamping |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | |
| S25S SVJBR-16-S | 25 | 23 | 250 | 19,5 | ≥32 |
| S25S SVJBL-16-S | 25 | 23 | 250 | 19,5 | ≥32 |
| S32T SVJBR-16 | 32 | 30 | 300 | 24 | ≥40 |
| S32T SVJBL-16 | 32 | 30 | 300 | 24 | ≥40 |
| S40U SVJBR-16 | 40 | 37 | 350 | 30 | ≥50 |
| S40U SVJBL-16 | 40 | 37 | 350 | 30 | ≥50 |
| Shape | CCMT |
| Processing | Medium |
| Cutting conditions | Continuous and light interrupted |
| Workpiece Material | Steel |
| Grade | RT250+: CVD-coated 2-color coated P20-P30 carbide for steel |
| Packaging unit | 10 Pc. |
| r | L | I.C | S | d | |
| CCMT 060204-PM RT250+ | 0,4 | 6,4 | 6,35 | 2,38 | 2,8 |
| CCMT 09T304-PM RT250+ | 0,4 | 9,7 | 9,525 | 3,97 | 4,4 |
| CCMT 09T308-PM RT250+ | 0,8 | 9,7 | 9,525 | 3,97 | 4,4 |
| Mill typ | Modular Mill |
| Insert | APKT 1003... |
| Packaging unit | 1 Pc. |
| D | Z | d1 | d2 | L | L1 | M | ap max | |
| MT90 AP10 D16 M08 L25 Z02-H | 16 | 2 | 15 | 8,5 | 25 | 17 | 8 | 10 |
| MT90 AP10 D20 M10 L30 Z03-H | 20 | 3 | 18 | 10,5 | 30 | 19 | 10 | 10 |
| MT90 AP10 D25 M12 L35 Z03-H | 25 | 3 | 21 | 12,5 | 35 | 23 | 12 | 10 |
| MT90 AP10 D32 M16 L43 Z04-H | 32 | 4 | 29 | 17 | 43 | 23 | 16 | 10 |
Deutsch
English