Threading insert Sets - 16ER...-G RT315 (60°) metric full profile

€59.00

Tax excluded

Description
Product Details

Insert size	16
Inside/Outside Thread	Outside
Direction	Right
Thread Type	Metric
Profile	Full profile
Workpiece Materials	Steel, Stainless Steel, Special Materials, NF-Metals
Flank angle	60°
Grade	RT315 = PVD-coated P15-P25 and M10-M25 for universal use
Packaging Unit	5 x 2 pc.

In the “Threading Inserts” category you will find thread cutting inserts with chip formers

in different versions (BSPT, UNC, etc.).

The set consists of 10 thread cutting plates with chip former:

	ISO	Pitch	I.C	S	d
2 x 16ER-V-ISO-1,0-G RT315	16	1,0 mm	9,525	3,52	4
2 x 16ER-V-ISO-1,25-G RT315	16	1,25 mm	9,525	3,52	4
2 x 16ER-V-ISO-1,5-G RT315	16	1,5 mm	9,525	3,52	4
2 x 16ER-V-ISO-1,75-G RT315	16	1,75 mm	9,525	3,52	4
2 x 16ER-V-ISO-2,0-G RT315	16	2,0 mm	9,525	3,52	4

ISO	Material	Cutting Data
P	Steel	Vc= 80-150m/min
M	Stainless Steel	Vc= 80-120m/min
S	Special Materials	Vc= 12-300m/min
N	NF-Metals	Vc= 20-60m/min

Brand Rinaldi-Tools

Reference 9991611

Data sheet

Inside/Outside: Outside
Gewindeplatten Große: 16
Gewindeplatten Verwendung: RT315 Steel and Stainless Steel
Gewinde: Metric
Materials: NF-Metals
Plastic
Special Materials
Stainless Steel
Steel
Rechts-Links: Right
thread profile: Full profile

Matching articles

SMOXH

BAX-TER16

ab €4.90

Availability: 2147483578 In Stock

Shim for TER 16...

14 other products in the same category:

-€25.00

Rinaldi-Tools

BDKTR/L + 10x MGMN 3 mm

€124.00 ab €99.00 -€25.00

Availability: 2147483647 In Stock

Inserts of your Choice:

MGMN 300-AL RT100 - Alluminium / Plastic / Non-ferrite Materials - Ground, sharp cutting edge with large rake angle

MGMN 300-C RT300 - Steel & Cast Iron - Stable cutting edge, grooving even with interrupted cuts

MGMN 300-J RT300 - Steel & Stainless Steel - Soft-cutting geometry for grooving and parting off

MGMN 300-M RT300 - Steel & Stainless Steel - Grooving, for universal use

MRMN 300 RT300 - Steel & Stainless Steel - Grooving, for universal use

Holder of your Choice:

	h	W	L	S	T(max)
BDKTR 1212-K3C für MGMN 300 (3mm)	12	12	100	12,3	18
BDKTL 1212-K3C für MGMN 300 (3mm)	12	12	100	12,3	18
BDKTR 1616-K3C für MGMN 300 (3mm)	16	16	125	16,4	18
BDKTL 1616-K3C für MGMN 300 (3mm)	16	16	125	16,4	18
BDKTR 2020-K3C für MGMN 300 (3mm)	20	20	125	20,4	20
BDKTL 2020-K3C für MGMN 300 (3mm)	20	20	125	20,4	20
BDKTR 2525-K3C für MGMN 300 (3mm)	25	25	150	25,4	22
BDKTL 2525-K3C für MGMN 300 (3mm)	25	25	150	25,4	22

Packaging unit = 1 Pc.

-€7.70
New

Rinaldi-Tools

Set of 5 - Solid Carbide End Mill for Aluminum (DLC) - Prisma -Line

€55.00 ab €47.30 -€7.70

Availability: 2147483647 In Stock

Mill Type	Solid Carbide End Mill for Aluminum
Helix Angle	35°
Workpiece Material	Non-Ferrous Metals
Lenght	Standard Lenght
Shank	Cylindrical Shank
Flutes	3
Grade	RT107: The DLC coating (Diamond-Like Carbon) ensures higher wear resistance.
Packaging unit	1 Pc

Each set consists of 5 milling cutters with the same diameter - diameter of your choice.

Eckfräsen

- 3-Flute Solid Carbide End Mill
- Centre Cutting

	D	d	H	L	Z	Version
5 x AF-P-Z3-D4.0 RT107	4	6	10	50	3	A
5 x AF-P-Z3-D5.0 RT107	5	6	15	50	3	A
5 x AF-P-Z3-D6.0 RT107	6	6	18	60	3	B
5 x AF-P-Z3-D8.0 RT107	8	8	20	60	3	B
5 x AF-P-Z3-D10.0 RT107	10	10	25	75	3	B

-€35.00

Rinaldi-Tools

Set of 5 - Solid Carbide End Mill for Aluminum - Prisma-Line

€45.00 ab €38.70 -€6.30

Availability: 2147483647 In Stock

Mill Type	Solid Carbide End Mill for Aluminum
Helix Angle	35°
Workpiece Material	NF-Materials
Lenght	Standard Lenght
Shank	Cylindrical Shank
Flutes	3
Grade	RT30K: Uncoated K30 carbide substrate for machining non-ferrous metals
Packaging unit	1 Pc

Each set consists of 5 milling cutters with the same diameter - diameter of your choice.

Eckfräsen

- 3-Flute Solid Carbide End Mill
- Centre Cutting

	D	d	H	L	Z	Version
5 x AF-P-Z3-D3.0 RT30K	3	6	9	50	3	A
5 x AF-P-Z3-D4.0 RT30K	4	6	10	60	3	A
5 x AF-P-Z3-D5.0 RT30K	5	6	13	50	3	A
5 x AF-P-Z3-D6.0 RT30K	6	6	16	60	3	B
5 x AF-P-Z3-D8.0 RT30K	8	8	20	60	3	B
5 x AF-P-Z3-D10.0 RT30K	10	10	25	75	3	B
5 x AF-P-Z3-D12.0 RT30K	12	12	30	75	3	B

-€31.00

Rinaldi-Tools

BIKTR/L -MGMN 4 mm + 10 Inserts of your Choice

€141.00 ab €109.00 -€32.00

Availability: 2147483647 In Stock

Packaging unit = 1 Pc.

Inserts of your Choice:
MGMN 400-AL RT100 - Non Ferrite Materials
MGMN 400-C RT300 - STEEL & CAST IRON
MGMN 400-J RT300 - STEEL & STAINLESS STEEL
MGMN 400-M RT300 - STEEL & STAINLESS STEEL
MRMN 400 RT300 - STEEL & STAINLESS STEEL

Holder of your Choice:

	d	D	L	l	h	f	t max	D min
BIKTR/L 25-K4C 4mm	25	32	200	45	23	18,5	7
BIKTR/L 32-K4C 4mm	32	40	250	49	30	22	8

-€28.00

Rinaldi-Tools

BIKTR/L -MGMN 3 mm + 10 Inserts of your Choice

€127.00 ab €99.00 -€28.00

Availability: 2147483647 In Stock

Packaging unit = 1 Pc.

Inserts of your Choice:
MGMN 300-AL RT100 - Non Ferrite Materials
MGMN 300-C RT300 - STEEL & CAST IRON
MGMN 300-J RT300 - STEEL & STAINLESS STEEL
MGMN 300-M RT300 - STEEL & STAINLESS STEEL
MRMN 300 RT300 - STEEL & STAINLESS STEEL

Holder of your Choice:

	d	D	L	l	h	f	t max	D min
BIKTR/L 20-K3C 3mm	20	26	170	33	18	15	6	26
BIKTR/L 25-K3C 3mm	25	32	200	45	23	18,5	7	32
BIKTR/L 32-K3C 3mm	32	40	250	49	30	22	8	40

-€16.00

Rinaldi-Tools

SPECIAL OFFER! GTN-Blade + 10 Grooving Inserts GTN... RT300

€75.00 ab €59.00 -€16.00

Availability: 2147483612 In Stock

GTN-Blade + 10 GTN... RT300 Grooving Insert

Blades:

Blade:	GTN Blade
Grooving System	GTN-System
Packaging unit	1 Pc.

	Grooving Width	H	W	L	h
GTN Blade 26-2	2 mm	26	1,6	110	21
GTN Blade 32-2	2 mm	32	1,6	150	25
GTN Blade 26-3	3 mm	26	2,4	110	21
GTN Blade 32-3	3 mm	32	2,4	150	25
GTN Blade 32-4	4 mm	32	3,2	150	25

Grooving Insert:

Grooving Insert	GTN...RT300
Materials	Steel and Stainless Steel
Grooving system	GTN-System
Coating	RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel
Packaging unit	10 Pc.

	Grooving Width	W	r
GTN-2 RT300	2 mm	2,20	0,20
GTN-3 RT300	3 mm	3,10	0,20
GTN-4 RT300	4 mm	4,10	0,20

Rinaldi-Tools

Threading insert Sets - 16IR...-G RT315 (60°) metric full profile

ab €59.00

Availability: 2147483631 In Stock

Insert size	16
Inside/Outside Thread	Inside
Direction	Right
Thread Type	Metric
Profile	Full profile
Workpiece Materials	Steel, Stainless Steel, Special Materials, NF-Metals
Flank angle	60°
Grade	RT315 = PVD-coated P15-P25 and M10-M25 for universal use
Packaging Unit	2 pc.

In the “Threading Inserts” category you will find thread cutting inserts with chip formers

in different versions (BSPT, UNC, etc.).

The set consists of 10 thread cutting plates with chip former: ::

	ISO	Pitch	I.C	S	d
2 x 16IR-V-ISO-1,0 RT315	16	1,0 mm	9,525	3,52	4
2 x 16IR-V-ISO-1,25 RT315	16	1,25 mm	9,525	3,52	4
2 x 16IR-V-ISO-1,5 RT315	16	1,5 mm	9,525	3,52	4
2 x 16IR-V-ISO-1,75 RT315	16	1,75 mm	9,525	3,52	4
2 x 16IR-V-ISO-2,0 RT315	16	2,0 mm	9,525	3,52	4

-€9.50

Rinaldi-Tools

Solid Carbide HPC Mill Set 6 - 12 mm

€88.50 ab €79.00 -€9.50

Availability: 2147483616 In Stock

Mill Typ	Solid Carbide End mill Set
Spiral Angle	35°/38°
Material	Steel, Stainless Steel, Cast Iron
Processing	Roughing and Finish
Length	Standard Lenght
Shaft	Weldon Shaft
Teeth	4
Coating	RT405: PVD-TiAlN-coated high-performance grade for solid carbide milling cutters
Packaging unit	1 Pc

Eckfräsen

- 4 flute solid carbide cutter
- Cutting across the middle
- TiAlN-coated
- Roughing/finishing
- consisting of respectively 1x 6/8/10/12 mm
- Unevenly divided spiral for roughing, finishing and neck relief (M)

	d(h6)	d1	H	M	L	Z
6	6	5,7	13	21	57	4
8	8	7,7	19	27	63	4
10	10	9,5	22	32	72	4
12	12	11,5	26	38	83	4

-€24.00

Rinaldi-Tools

BDKTR/L + 10x MGMN 2 mm

€123.00 ab €99.00 -€24.00

Availability: 2147483647 In Stock

BDKTR/L + 10x MGMN 2 mm

Inserts of your Choice:

MGMN 200-AL RT100 - Alluminium / Plastic / Non-ferrite Materials - Ground, sharp cutting edge with large rake angle

MGMN 200-C RT300 - Steel & Cast Iron - Stable cutting edge, grooving even with interrupted cuts

MGMN 200-J RT300 - Steel & Stainless Steel - Soft-cutting geometry for grooving and parting off

MGMN 200-M RT300 - Steel & Stainless Steel - Grooving, for universal use

MRMN 200 RT300 - Steel & Stainless Steel - Grooving, for universal use

Holder of your Choice:

	h	W	L	S	T(max)
BDKTR 1212-K2C für MGMN 200 (2mm)	12	12	100	12,3	15
BDKTL 1212-K2C für MGMN 200 (2mm)	12	12	100	12,3	15
BDKTR 1616-K2C für MGMN 200 (2mm)	16	16	125	16,3	18
BDKTL 1616-K2C für MGMN 200 (2mm)	16	16	125	16,3	18
BDKTR 2020-K2C für MGMN 200 (2mm)	20	20	125	20,3	18
BDKTL 2020-K2C für MGMN 200 (2mm)	20	20	125	20,3	18
BDKTR 2525-K2C für MGMN 200 (2mm)	25	25	150	25,3	18
BDKTL 2525-K2C für MGMN 200 (2mm)	25	25	150	25,3	18

Packaging unit = 1 Pc.

-€25.00

Rinaldi-Tools

BIKTR/L -MGMN 2 mm + 10 Inserts of your Choice

€124.00 ab €99.00 -€25.00

Availability: 2147483646 In Stock

Inserts of your Choice:

MGMN 200-AL RT100 - Alluminium / Plastic / Non-ferrite Materials - Ground, sharp cutting edge with large rake angle

MGMN 200-C RT300 - Steel & Cast Iron - Stable cutting edge, grooving even with interrupted cuts

MGMN 200-J RT300 - Steel & Stainless Steel - Soft-cutting geometry for grooving and parting off

MGMN 200-M RT300 - Steel & Stainless Steel - Grooving, for universal use

MRMN 200 RT300 - Steel & Stainless Steel - Grooving, for universal use

Holder of your Choice:

	d	D	L	l	h	f	t max	D min
BIKTR/L 16-K2C Stechbreite 2mm	16	20	150	33	15	11,5	4	20
BIKTR/L 20-K2C Stechbreite 2mm	20	16	170	33	18	14,5	6	26

Packaging unit = 1 Pc.

-€6.65
New

Rinaldi-Tools

Set of 5 - Solid Carbide End Mill - Prisma-Line

€47.50 ab €40.85 -€6.65

Availability: 2147483644 In Stock

Mill Type	Solid Carbide End Mill
Helix Angle	38°
Workpiece Material	Steel, Stainless Steel, Cast Iron
Processing	Finish
Lenght	Standard Length
Shank	Weldon-Shank
Flutes	4
Grade	RT405: PVD-TIALN-coated high-performance grade for solid carbide milling cutters
Packaging unit	1 Pc

Each set consists of 5 milling cutters with the same diameter - diameter of your choice.

Eckfräsen

- 4 flute solid carbide cutter
- Centre Cutting
- TIALN-coated

Weldon Schaft

	D	d(h6)	H	L	Z	Version
SF-P-Z4-D3.0-W RT405	3	6	8	50	4	A
SF-P-Z4-D4.0-W RT405	4	6	11	50	4	A
SF-P-Z4-D5.0-W RT405	5	6	13	50	4	A
SF-P-Z4-D6.0-W RT405	6	6	16	50	4	B
SF-P-Z4-D8.0-W RT405	8	8	20	60	4	B
SF-P-Z4-D10.0-W RT405	10	10	25	75	4	B
SF-P-Z4-D12.0-W RT405	12	12	30	75	4	B

-€8.10
New

Rinaldi-Tools

Set of 5 - Solid Carbide Hard Milling Cutter up to 68 HRC - Prisma-Line

€58.00 ab €49.90 -€8.10

Availability: 2147483647 In Stock

Mill Type	Solid Carbide Hard Milling Cutter
Helix Angle	45°
Workpiece Material	Hard Materials up to 68 HRC
Lenght	Standard Length
Shank	Cylindrical Shank
Flutes	4
Grade	RT555: PVD-coated carbide substrate for the Hard machining of steel (up to HRC 55-68). Highest wear resistance and toughness
Packaging unit	1 Pc.

Each set consists of 5 milling cutters with the same diameter - diameter of your choice.

Eckfräsen

- 4-Flute Solid Carbide Hard Milling Cutter
- Centre Cutting
- PVD-Coated

	D	d(h6)	H	L	Z	Version
5 x HF-P-Z4-D1.0 RT555	1	6	3	50	4	A
5 x HF-P-Z4-D2.0 RT555	2	6	6	50	4	A
5 x HF-P-Z4-D3.0 RT555	3	6	8	50	4	A
5 x HF-P-Z4-D3.5 RT555	3,5	6	10	50	4	A
5 x HF-P-Z4-D4.0 RT555	4	6	11	50	4	A
5 x HF-P-Z4-D5.0 RT555	5	6	13	50	4	A
5 x HF-P-Z4-D5.5 RT555	5,5	6	16	50	4	A
5 x HF-P-Z4-D6.0 RT555	6	6	16	50	4	B
5 x HF-P-Z4-D8.0 RT555	8	8	20	60	4	B
5 x HF-P-Z4-D10.0 RT555	10	10	25	75	4	B
5 x HF-P-Z4-D12.0 RT555	12	12	30	75	4	B

External Tool Holder	TER
Insert	Threading Inserts
Main application	Threading
Right/Left	Right
Clamping	Screw Clamp
Packaging Unit	1 Pc.

Shop

Threading insert Sets - 16ER...-G RT315 (60°) metric full profile

Matching articles

External Tool Holder - TER...

BAX-TER16

Shim for TER 16...

14 other products in the same category:

BDKTR/L + 10x MGMN 3 mm

Set of 5 - Solid Carbide End Mill for Aluminum (DLC) - Prisma -Line

BDKTR/L + 10x MGMN 5 mm

Set of 5 - Solid Carbide End Mill for Aluminum - Prisma-Line

BDKTR/L + 10x MGMN 4 mm

BIKTR/L -MGMN 4 mm + 10 Inserts of your Choice

BIKTR/L -MGMN 3 mm + 10 Inserts of your Choice

SPECIAL OFFER! GTN-Blade + 10 Grooving Inserts GTN... RT300

Threading insert Sets - 16IR...-G RT315 (60°) metric full profile

Solid Carbide HPC Mill Set 6 - 12 mm

BDKTR/L + 10x MGMN 2 mm

BDKTR/L + 10x MGMN 2 mm

BIKTR/L -MGMN 2 mm + 10 Inserts of your Choice

Inserts of your Choice:

Set of 5 - Solid Carbide End Mill - Prisma-Line

Set of 5 - Solid Carbide Hard Milling Cutter up to 68 HRC - Prisma-Line

Join Our Newsletter Now

100% SECURE PAYMENT

PAYPAL PAYMENT

ADVISORY

FAST DELIVERY WITH UPS

Information

Custom Links

My Account

payment methods

	H	h	L	B	f	Insert
TER 1616 H16	16	16	100	16	16	16.. ER..
TER 2020 K16	20	20	125	20	20	16.. ER..
TER 2525 M16	25	25	150	25	25	16.. ER..
TER 2525 M22	25	25	150	25	25	22.. ER..
TER 3232 P22	32	32	170	32	32	22.. ER..

	h	W	L	S	T(max)
BDKTR 2020-K5C für MGMN 500 (5mm)	20	20	125	20,4	20
BDKTL 2020-K5C für MGMN 500 (5mm)	20	20	125	20,4	20
BDKTR 2525-K5C für MGMN 500 (5mm)	25	25	150	25,4	25
BDKTL 2525-K5C für MGMN 500 (5mm)	25	25	150	25,4	25
BDKTL 3232-K5C für MGMN 500 (5mm)	32	32	170	32,5	25
BDKTL 3232-K5C für MGMN 500 (5mm)	32	32	170	32,5	25

	h	W	L	S	T(max)
BDKTR 2020-K4C für MGMN 400 (4mm)	20	20	125	20,4	20
BDKTL 2020-K4C für MGMN 400 (4mm)	20	20	125	20,4	20
BDKTR 2525-K4C für MGMN 400 (4mm)	25	25	150	25,4	22
BDKTL 2525-K4C für MGMN 400 (4mm)	25	25	150	25,4	22

TURNING

MILLING

DRILLING

Threading insert Sets - 16ER...-G RT315 (60°) metric full profile

Matching articles

Shim for TER 16...

14 other products in the same category:

BDKTR/L + 10x MGMN 2 mm

Inserts of your Choice:

100% SECURE PAYMENT

PAYPAL PAYMENT

ADVISORY

FAST DELIVERY WITH UPS