Error!

  • -€6.65
  • New

Set of 5 - Solid Carbide End Mill - Prisma-Line

€47.50
€40.85 Save €6.65
Tax excluded
Diameter
Shank
Quantity

Mill Type Solid Carbide End Mill 
Helix Angle 38°
Workpiece Material Steel, Stainless Steel, Cast Iron
Processing Finish
Lenght Standard Length
Shank Weldon-Shank
Flutes 4
Grade RT405: PVD-TIALN-coated high-performance grade
for solid carbide milling cutters
Packaging unit 1 Pc

Each set consists of 5 milling cutters with the same diameter - diameter of your choice.

  Eckfräsen    

  

- 4-Flute Solid Carbide End Mill 
- Centre Cutting
- TIALN-coated

Weldon-Shank

Art. Nr. D d(h6) H L Z Version
SF-P-Z4-D3.0-W RT405
 5xP2552521 3 6 8 50 4 A
SF-P-Z4-D4.0-W RT405
 5xP2552522 4 6 11 50 4 A
SF-P-Z4-D5.0-W RT405
 5xP2552523 5 6 13 50 4 A
SF-P-Z4-D6.0-W RT405
 5xP2552524 6 6 16 50 4 B
SF-P-Z4-D8.0-W RT405
 5xP2552525 8 8 20 60 4 B
SF-P-Z4-D10.0-W RT405
 5xP2552526 10 10 25 75 4 B
SF-P-Z4-D12.0-W RT405
 5xP2552527 12 12 30 75 4 B

Cutting Data

Workpiece Material Tensile strength Cutting Speed Feed fz (mm)
(N/mm²) Ae Vc (m/min) Ø 3-5 Ø 6-8 Ø 10 Ø 12-16 Ø 20
Structural Steel <450 1/1 100-170 0,02-0,03 0,03-0,05 0,07 0,08-0,09 0,1
1/2 120-200 0,03-0,04 0,04-0,06 0,09 0,1-0,12 0,13
1/10 160-250 0,05-0,07 0,07-0,09 0,14 0,16-0,18 0,2

Tempered Steel
450-700

 1/1 90-120 0,02-0,03 0,03-0,05 0,07 0,08-0,09 0,1
1/2 110-160 0,03-0,04 0,04-0,06 0,09 0,1-0,12 0,13
1/10 160-220 0,05-0,07 0,07-0,09 0,14 0,16-0,18 0,2
Tooling Steel >700 1/1 90-120 0,02-0,03 0,03-0,05 0,07 0,08-0,09 0,1
1/2 110-150 0,03-0,04 0,04-0,06 0,09 0,1-0,12 0,13
1/10 150-200 0,05-0,07 0,07-0,09 0,14 0,16-0,18 0,2
Stainless Steel <1100 1/1 50-70 0,02-0,03 0,03-0,04 0,05 0,06-0,07 0,08
1/2 60-80 0,02-0,04 0,04-0,05 0,07 0,08-0,1 0,11
1/10 70-100 0,04-0,05 0,05-0,07 0,11 0,13-0,15 0,16
Cast Iron 1/1 130-170 0,02-0,03 0,03-0,05 0,07 0,08-0,09 0,1
1/2 130-200 0,03-0,04 0,04-0,06 0,09 0,1-0,12 0,13
1/10 160-250 0,05-0,07 0,07-0,09 0,14 0,16-0,18 0,2
Hardened Steel up to 55 HRC 1/1 80 0,02-0,03 0,03-0,04 0,05 0,06-0,07 0,08
1/2 100 0,02-0,04 0,04-0,05 0,07 0,08-0,1 0,11
1/10 120 0,04-0,05 0,05-0,07 0,11 0,13-0,15 0,16

Rinaldi-Tools
5xP2552521

Data sheet

Materials
Cast Iron
Stainless Steel
Steel
Solid carbide Mills
End Mill

14 other products in the same category:

BDKTR/L + 10x MGMN 5 mm
  • -€35.00
Rinaldi-Tools

BDKTR/L + 10x MGMN 5 mm

Regular price €154.00 Price ab €119.00 -€35.00
Availability: 222222222 In Stock

Packaging unit = 1 Pc.

Inserts of your Choice:

MGMN 500-AL RT100 - Aluminium / Plastic / Non-ferrite Materials

MGMN 500-C RT300 - Steel & Cast Iron

MGMN 500-J RT300 - Steel & Stainless Steel

MGMN 500-M RT300 - Steel & Stainless Steel

MRMN 500 RT300 - Steel & Stainless Steel

Holder of your Choice:

  h W L S T(max)
BDKTR 2020-K5C für MGMN 500 (5mm)
 20 20 125 20,4 20
BDKTL 2020-K5C für MGMN 500 (5mm)
 20 20 125 20,4 20
BDKTR 2525-K5C für MGMN 500 (5mm)
 25 25 150 25,4 25
BDKTL 2525-K5C für MGMN 500 (5mm)
 25 25 150 25,4 25
BDKTL 3232-K5C für MGMN 500 (5mm) 32 32 170 32,5 25
BDKTL 3232-K5C für MGMN 500 (5mm) 32 32 170 32,5 25

 

Solid Carbide HPC Mill Set...
  • -€9.50
Rinaldi-Tools

Solid Carbide HPC Mill Set 6 - 12 mm

Regular price €88.50 Price ab €79.00 -€9.50
Availability: 2147483616 In Stock
Mill Typ Solid Carbide End mill Set
Spiral Angle 35°/38°
Material Steel, Stainless Steel, Cast Iron
Processing Roughing and Finish
Length Standard Lenght
Shaft Weldon Shaft
Teeth 4
Coating RT405: PVD-TiAlN-coated high-performance grade
for solid carbide milling cutters
Packaging unit 1 Pc

 Eckfräsen    

   

- 4 flute solid carbide cutter 
- Cutting across the middle
- TiAlN-coated
- Roughing/finishing
- consisting of respectively 1x 6/8/10/12 mm
- Unevenly divided spiral for roughing, finishing and neck relief (M)

d(h6) d1 H M L Z
6 6 5,7 13 21 57 4
8 8 7,7 19 27 63 4
10 10 9,5 22 32 72 4
12 12 11,5 26 38 83 4

BIKTR/L -MGMN 3 mm + 10...
  • -€28.00
Rinaldi-Tools

BIKTR/L -MGMN 3 mm + 10 Inserts of your Choice

Regular price €127.00 Price ab €99.00 -€28.00
Availability: 2147483647 In Stock

Packaging unit = 1 Pc.

Inserts of your Choice:
MGMN 300-AL RT100 - Non Ferrite Materials
MGMN 300-C RT300 - STEEL & CAST IRON
MGMN 300-J RT300 - STEEL & STAINLESS STEEL
MGMN 300-M RT300 - STEEL & STAINLESS STEEL
MRMN 300 RT300 - STEEL & STAINLESS STEEL

Holder of your Choice:

  d D L l h f t max D min
BIKTR/L 20-K3C 3mm
 20 26 170 33 18 15 6 26
BIKTR/L 25-K3C 3mm
 25 32 200 45 23 18,5 7 32
BIKTR/L 32-K3C 3mm 32 40 250 49 30 22 8 40

 

BDKTR/L + 10x MGMN 2 mm
  • -€24.00
Rinaldi-Tools

BDKTR/L + 10x MGMN 2 mm

Regular price €123.00 Price ab €99.00 -€24.00
Availability: 2147483647 In Stock

BDKTR/L + 10x MGMN 2 mm

Inserts of your Choice:

MGMN 200-AL RT100 - Alluminium / Plastic / Non-ferrite Materials - Ground, sharp cutting edge with large rake angle

MGMN 200-C RT300 - Steel & Cast Iron - Stable cutting edge, grooving even with interrupted cuts

MGMN 200-J RT300 - Steel & Stainless Steel - Soft-cutting geometry for grooving and parting off

MGMN 200-M RT300 - Steel & Stainless Steel - Grooving, for universal use

MRMN 200 RT300 - Steel & Stainless Steel - Grooving, for universal use

Holder of your Choice:

  h W L S T(max)
BDKTR 1212-K2C für MGMN 200 (2mm)
 12 12 100 12,3 15
BDKTL 1212-K2C für MGMN 200 (2mm)
 12 12 100 12,3 15
BDKTR 1616-K2C für MGMN 200 (2mm)
 16 16 125 16,3 18
BDKTL 1616-K2C für MGMN 200 (2mm)
 16 16 125 16,3 18
BDKTR 2020-K2C für MGMN 200 (2mm)
 20 20 125 20,3 18
BDKTL 2020-K2C für MGMN 200 (2mm)
 20 20 125 20,3 18
BDKTR 2525-K2C für MGMN 200 (2mm)
 25 25 150 25,3 18
BDKTL 2525-K2C für MGMN 200 (2mm)
 25 25 150 25,3 18

 Packaging unit = 1 Pc.

Set of 5 - Solid Carbide...
  • -€8.10
  • New
Rinaldi-Tools

Set of 5 - Solid Carbide Hard Milling Cutter up to 68 HRC - Prisma-Line

Regular price €58.00 Price ab €49.90 -€8.10
Availability: 2147483647 In Stock
Mill Type Solid Carbide Hard Milling Cutter
Helix Angle 45°
Workpiece Material Hard Materials up to 68 HRC
Lenght Standard Length
Shank Cylindrical Shank
Flutes 4
Grade RT555: PVD-coated carbide substrate for the
Hard machining of steel (up to HRC 55-68).
Highest wear resistance and toughness
Packaging unit 1 Pc.

Each set consists of 5 milling cutters with the same diameter - diameter of your choice.

  Eckfräsen 

 

- 4-Flute Solid Carbide Hard Milling Cutter 
- Centre Cutting
- PVD-Coated

D d(h6) H L Z Version
5 x HF-P-Z4-D1.0 RT555 1 6 3 50 4 A
5 x HF-P-Z4-D2.0 RT555
 2 6 6 50 4 A
5 x HF-P-Z4-D3.0 RT555
 3 6 8 50
 4 A
5 x HF-P-Z4-D3.5 RT555 3,5 6 10 50 4 A
5 x HF-P-Z4-D4.0 RT555
 4 6 11 50 4 A
5 x HF-P-Z4-D5.0 RT555
 5 6 13 50 4 A
5 x HF-P-Z4-D5.5 RT555
 5,5 6 16 50 4 A
5 x HF-P-Z4-D6.0 RT555
 6 6 16 50 4 B
5 x HF-P-Z4-D8.0 RT555
 8 8 20 60 4 B
5 x HF-P-Z4-D10.0 RT555
 10 10 25 75 4 B
5 x HF-P-Z4-D12.0 RT555
 12 12 30 75 4 B

Set of 5 - Solid Carbide...
  • -€7.70
  • New
Rinaldi-Tools

Set of 5 - Solid Carbide End Mill for Aluminum (DLC) - Prisma -Line

Regular price €55.00 Price ab €47.30 -€7.70
Availability: 2147483647 In Stock
Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 35°
Workpiece Material Non-Ferrous Metals
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 3
Grade RT107: The DLC coating (Diamond-Like Carbon) ensures higher wear resistance.
Packaging unit 1 Pc

Each set consists of 5 milling cutters with the same diameter - diameter of your choice.

 Eckfräsen    

 

- 3-Flute Solid Carbide End Mill 
- Centre Cutting

  D d H L Z Version
5 x AF-P-Z3-D4.0 RT107 4 6 10 50 3 A
5 x AF-P-Z3-D5.0 RT107 5 6 15 50 3 A
5 x AF-P-Z3-D6.0 RT107 6 6 18 60 3 B
5 x AF-P-Z3-D8.0 RT107 8 8 20 60 3 B
5 x AF-P-Z3-D10.0 RT107 10 10 25 75 3 B

SPECIAL OFFER! GTN-Blade +...
  • -€16.00
Rinaldi-Tools

SPECIAL OFFER! GTN-Blade + 10 Grooving Inserts GTN... RT300

Regular price €75.00 Price ab €59.00 -€16.00
Availability: 2147483612 In Stock

GTN-Blade + 10 GTN... RT300 Grooving Insert

Blades:

Blade: GTN Blade
Grooving System GTN-System
Packaging unit 1 Pc.

Grooving Width H W L h
GTN Blade 26-2 2 mm 26 1,6 110 21
GTN Blade 32-2 2 mm 32 1,6 150 25
GTN Blade 26-3 3 mm 26 2,4 110 21
GTN Blade 32-3 3 mm 32 2,4 150 25
GTN Blade 32-4 4 mm 32 3,2 150 25

Grooving Insert:

Grooving Insert GTN...RT300
Materials Steel and Stainless Steel
Grooving system GTN-System
Coating RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel
Packaging unit 10 Pc.

Grooving Width W r
GTN-2 RT300 2 mm 2,20 0,20
GTN-3 RT300 3 mm 3,10 0,20
GTN-4 RT300 4 mm 4,10 0,20

Threading insert Sets -...
Rinaldi-Tools

Threading insert Sets - 16IR...-G RT315 (60°) metric full profile

Price ab €59.00
Availability: 2147483631 In Stock
Insert size 16
Inside/Outside Thread Inside
Direction Right
Thread Type Metric
Profile Full profile
Workpiece Materials Steel, Stainless Steel, Special Materials, NF-Metals
Flank angle 60°
Grade RT315 = PVD-coated P15-P25 and M10-M25 for universal use
Packaging Unit 2 pc.

In the “Threading Inserts” category you will find thread cutting inserts with chip formers

in different versions (BSPT, UNC, etc.).

The set consists of 10 thread cutting plates with chip former: ::

ISO Pitch I.C S d
2 x 16IR-V-ISO-1,0 RT315 16 1,0 mm 9,525 3,52 4
2 x 16IR-V-ISO-1,25 RT315
 16 1,25 mm 9,525 3,52 4
2 x 16IR-V-ISO-1,5 RT315
 16 1,5 mm 9,525 3,52 4
2 x 16IR-V-ISO-1,75 RT315
 16 1,75 mm 9,525 3,52 4
2 x 16IR-V-ISO-2,0 RT315
 16 2,0 mm 9,525 3,52 4

BDKTR/L + 10x MGMN 4 mm
  • -€31.00
Rinaldi-Tools

BDKTR/L + 10x MGMN 4 mm

Regular price €140.00 Price ab €109.00 -€31.00
Availability: 2147483647 In Stock

Packaging unit = 1 Pc.

Inserts of your Choice:

MGMN 400-AL RT100 - Aluminium / Plastic / Non-ferrite Materials

MGMN 400-C RT300 - Steel & Cast Iron

MGMN 400-J RT300 - Steel & Stainless Steel

MGMN 400-M RT300 - Steel & Stainless Steel

MRMN 400 RT300 - Steel & Stainless Steel

Holder of your Choice:

  h W L S T(max)
BDKTR 2020-K4C für MGMN 400 (4mm)
 20 20 125 20,4 20
BDKTL 2020-K4C für MGMN 400 (4mm)
 20 20 125 20,4 20
BDKTR 2525-K4C für MGMN 400 (4mm)
 25 25 150 25,4 22
BDKTL 2525-K4C für MGMN 400 (4mm)
 25 25 150 25,4 22

 

BIKTR/L -MGMN 4 mm + 10...
  • -€32.00
Rinaldi-Tools

BIKTR/L -MGMN 4 mm + 10 Inserts of your Choice

Regular price €141.00 Price ab €109.00 -€32.00
Availability: 2147483647 In Stock

Packaging unit = 1 Pc.

Inserts of your Choice:
MGMN 400-AL RT100 - Non Ferrite Materials
MGMN 400-C RT300 - STEEL & CAST IRON
MGMN 400-J RT300 - STEEL & STAINLESS STEEL
MGMN 400-M RT300 - STEEL & STAINLESS STEEL
MRMN 400 RT300 - STEEL & STAINLESS STEEL

Holder of your Choice:

  d D L l h f t max D min
BIKTR/L 25-K4C 4mm
 25 32 200 45 23 18,5 7
BIKTR/L 32-K4C 4mm
 32 40 250 49 30 22 8

 

BDKTR/L + 10x MGMN 3 mm
  • -€25.00
Rinaldi-Tools

BDKTR/L + 10x MGMN 3 mm

Regular price €124.00 Price ab €99.00 -€25.00
Availability: 2147483647 In Stock

Inserts of your Choice:

MGMN 300-AL RT100 - Alluminium / Plastic / Non-ferrite Materials - Ground, sharp cutting edge with large rake angle

MGMN 300-C RT300 - Steel & Cast Iron - Stable cutting edge, grooving even with interrupted cuts

MGMN 300-J RT300 - Steel & Stainless Steel - Soft-cutting geometry for grooving and parting off

MGMN 300-M RT300 - Steel & Stainless Steel - Grooving, for universal use

MRMN 300 RT300 - Steel & Stainless Steel - Grooving, for universal use

Holder of your Choice:

  h W L S T(max)
BDKTR 1212-K3C für MGMN 300 (3mm)
 12 12 100 12,3 18
BDKTL 1212-K3C für MGMN 300 (3mm)
 12 12 100 12,3 18
BDKTR 1616-K3C für MGMN 300 (3mm)
 16 16 125 16,4 18
BDKTL 1616-K3C für MGMN 300 (3mm)
 16 16 125 16,4 18
BDKTR 2020-K3C für MGMN 300 (3mm)
 20 20 125 20,4 20
BDKTL 2020-K3C für MGMN 300 (3mm)
 20 20 125 20,4 20
BDKTR 2525-K3C für MGMN 300 (3mm)
 25 25 150 25,4 22
BDKTL 2525-K3C für MGMN 300 (3mm)
 25 25 150 25,4 22

 Packaging unit = 1 Pc.

Set of 5 - Solid Carbide...
  • -€6.30
  • New
Rinaldi-Tools

Set of 5 - Solid Carbide End Mill for Aluminum - Prisma-Line

Regular price €45.00 Price ab €38.70 -€6.30
Availability: 2147483647 In Stock
Mill Type Solid Carbide End Mill for Aluminum
Helix Angle 35°
Workpiece Material NF-Materials
Lenght Standard Lenght
Shank Cylindrical Shank
Flutes 3
Grade RT30K: Uncoated K30 carbide substrate for
machining non-ferrous metals
Packaging unit 1 Pc

Each set consists of 5 milling cutters with the same diameter - diameter of your choice.

 Eckfräsen    

 

- 3-Flute Solid Carbide End Mill 
- Centre Cutting

  D d H L Z Version
5 x AF-P-Z3-D3.0 RT30K 3 6 9 50 3 A
5 x AF-P-Z3-D4.0 RT30K 4 6 10 60 3 A
5 x AF-P-Z3-D5.0 RT30K 5 6 13 50 3 A
5 x AF-P-Z3-D6.0 RT30K 6 6 16 60 3 B
5 x AF-P-Z3-D8.0 RT30K 8 8 20 60 3 B
5 x AF-P-Z3-D10.0 RT30K 10 10 25 75 3 B
5 x AF-P-Z3-D12.0 RT30K 12 12 30 75 3 B
BIKTR/L -MGMN 2 mm + 10...
  • -€25.00
Rinaldi-Tools

BIKTR/L -MGMN 2 mm + 10 Inserts of your Choice

Regular price €124.00 Price ab €99.00 -€25.00
Availability: 2147483646 In Stock

Inserts of your Choice:

MGMN 200-AL RT100 - Alluminium / Plastic / Non-ferrite Materials - Ground, sharp cutting edge with large rake angle

MGMN 200-C RT300 - Steel & Cast Iron - Stable cutting edge, grooving even with interrupted cuts

MGMN 200-J RT300 - Steel & Stainless Steel - Soft-cutting geometry for grooving and parting off

MGMN 200-M RT300 - Steel & Stainless Steel - Grooving, for universal use

MRMN 200 RT300 - Steel & Stainless Steel - Grooving, for universal use

Holder of your Choice:

  d D L l h f t max D min
BIKTR/L 16-K2C  Stechbreite 2mm
 16 20 150 33 15 11,5 4 20
BIKTR/L 20-K2C Stechbreite 2mm
 20 16 170 33 18 14,5 6 26

 Packaging unit = 1 Pc.

Threading insert Sets -...
Rinaldi-Tools

Threading insert Sets - 16ER...-G RT315 (60°) metric full profile

Price ab €59.00
Availability: 2147483617 In Stock
Insert size 16
Inside/Outside Thread Outside
Direction Right
Thread Type Metric
Profile Full profile
Workpiece Materials Steel, Stainless Steel, Special Materials, NF-Metals
Flank angle 60°
Grade RT315 = PVD-coated P15-P25 and M10-M25 for universal use
Packaging Unit 5 x 2 pc.

In the “Threading Inserts” category you will find thread cutting inserts with chip formers

in different versions (BSPT, UNC, etc.).

The set consists of 10 thread cutting plates with chip former: :

ISO Pitch I.C S d
2 x 16ER-V-ISO-1,0-G RT315 16 1,0 mm 9,525 3,52 4
2 x 16ER-V-ISO-1,25-G RT315
 16 1,25 mm 9,525 3,52 4
2 x 16ER-V-ISO-1,5-G RT315
 16 1,5 mm 9,525 3,52 4
2 x 16ER-V-ISO-1,75-G RT315
 16 1,75 mm 9,525 3,52 4
2 x 16ER-V-ISO-2,0-G RT315
 16 2,0 mm 9,525 3,52 4

Product added to compare.