Error!

Filter By

Type of clamping

Type of clamping

Cooling Holes

Cooling Holes

Inserts

Inserts

Internal Tool Holders

Rinaldi Tools offers a large selection of internal turning tool holders for all applications. Our holders are made from high-quality steel to ensure maximum durability and reliability, even under high stress. We recommend using them with our turning inserts to achieve the best possible results.

No minimum order value

Free Shipping within Germany

on orders over €150

Telephone order and advice

Tel.: +49 (0)208 - 848 67 82

Active filters

  • Cooling Holes: without cooling holes
Internal Tool Holder - SCLCR/L (95°)
SMOXH

Internal Tool Holder - SCLCR/L (95°)

Price ab €23.00
Availability: 2147483621 In Stock

Boring Bar SCLCR/L
Cutting Angle 95°
Insert CC..
Main application Longitudinal turning, Facing
Clamping Screw Clamping
Cooling Without Cooling Holes
Packaging unit 1 Pc.

  d h L L1 f Dmin
S0608H SCLCR/L 06 8 7 100 25 05 ≥8 
S08H SCLCR/L 06 8 7 100 - 07 ≥11
S10K SCLCR/L 06 10 9 125 - 08 ≥13
S12K SCLCR/L 06 12 11 125 - 10 ≥16
S16x10M SCLCR/L 06 16 15 150 35 10 ≥16
S16x12M SCLCR/L 06 16 15 150 35 10 ≥16
S12K SCLCR/L 09 12 11 125 - 10 ≥16
S16P SCLCR/L 09 16 15 170 - 13 ≥21
S20R SCLCR/L 09 20 18 200 - 15 ≥25
S25S SCLCR/L 09 25 23 250 - 19,5 ≥32
S32T SCLCR/L 09 32 30 300 - 24 ≥40

Internal Tool Holder - PCLNR/L (95°)
Rinaldi-Tools GmbH

Internal Tool Holder - PCLNR/L (95°)

Price ab €62.00
Availability: 214748364 In Stock

Boring Bar SPCLNR/L
Cutting Angle 95°
Insert CN..
Main application Longitudinal turning, Facing
Clamping Pin Lock
Cooling Without Cooling Holes
Packaging unit 1 Pc.

d L h f Dmin
S25Q-PCLNR/L 12 25 180 23 17 32
S25T-PCLNR/L 12
 25 300 23 17 32
S32R-PCLNR/L 12
 32 200 30 22 44
S32U-PCLNR/L 12
 32 350 30 22 44
S40S-PCLNR/L 12
 40 250 37 27 54
S40V-PCLNR/L 12
 40 400 37 27 54
S50S-PCLNR/L 12
 50 250 47 35 63
S50W-PCLNR/L 12
 50 450 47 35 63
S50S-PCLNR/L 19
 50 250 47 35 63
S50W-PCLNR/L 19
 50 450 47 35 63

Internal Tool Holder - TCLNR/L (95°) with clamping
SMOXH

Internal Tool Holder - TCLNR/L (95°) with clamping

Price ab €52.00
Availability: 214748364 In Stock

Boring Bar TCLNR/L
Cutting Angle 95°
Insert CN..
Main application Longitudinal turning, Facing
Clamping Claw Clamping
Cooling Without Cooling Holes
Packaging unit 1 Pc.

Particularly suitable for roughing due to stable claw clamping.

  d h L f Dmin Insert
S20R TCLNR-12 20 18 200 15 ≥26 CN.. 1204..
S20R TCLNL-12 20 18 200 15 ≥26 CN.. 1204..
S25S TCLNR-12 25 23 250 19,5 ≥38 CN.. 1204..
S25S TCLNL-12 25 23 250 19,5 ≥38 CN.. 1204..
S32T TCLNR-12 32 30 300 24 ≥40
 CN.. 1204..
S32T TCLNL-12 32 30 300 24 ≥40 CN.. 1204..
S40U TCLNR-12 40 37 350 30 ≥50 CN.. 1204..
S40U TCLNL-12 40 37 350 30 ≥50 CN.. 1204..
S40U TCLNR-16 40 37 350 30 ≥44 CN.. 1606..
S40U TCLNL-16 40 37 350 30 ≥44 CN.. 1606..
S50V TCLNR-12 50 47 400 38 ≥63 CN.. 1204..
S50V TCLNL-12 50 47 400 38 ≥63 CN.. 1204..

Internal Tool Holder - SDUCR/L (93°)
SMOXH

Internal Tool Holder - SDUCR/L (93°)

Price ab €25.00
Availability: 2147483634 In Stock

Boring Bar SDUCR/L
Cutting Angle 93°
Insert DC..
Main application Profiling
Clamping Screw Clamping
Cooling Without Cooling Holes
Packaging unit 1 Pc.

d h L f Dmin
S10K SDUCR/L 07 10 9 125 8 ≥13
S12K SDUCR/L 07 12 11 125 10 ≥16
S16x10M SDUCR/L 07 16 15 150 8 ≥13
S16x12M SDUCR/L 07 16 15 150 10 ≥16
S16P SDUCR/L 07 16 15 170 13 ≥21
S20R SDUCR/L 07 20 18 200 15 ≥25
S16P SDUCR/L 11 16 15 170 13 ≥21
S20R SDUCR/L 11 20 18 200 15 ≥25
S25S SDUCR/L 11 25 23 250 19,5 ≥32
S32T SDUCR/L 11 32 30 300 24 ≥40

 

Internal Tool Holder - SDQCR/L (107,5°)
SMOXH

Internal Tool Holder - SDQCR/L (107,5°)

Price ab €26.00
Availability: 2147483634 In Stock

Boring Bar SDQCR/L
Cutting Angle 107,5°
Insert DC..
Main application Profiling
Clamping Screw Clamping
Cooling Without Cooling Holes
Packaging unit 1 Pc.

  d h L f Dmin Insert
S12K SDQCR/L-07 12 11 125 10 ≥16 DCG./DCM. 07..
S16P SDQCR/L-07 16 15 170 13 ≥21 DCG./DCM. 07..
S16P SDQCR/L-11
 16 15 170 13 ≥21 DCG./DCM. 11..
S20R SDQCR/L-11
 20 18 200 15 ≥25 DCG./DCM. 11..
S25S SDQCR/L-11
 25 23 250 19,5 ≥32 DCG./DCM. 11..

Internal Tool Holder - SDXCR/L (93°)
SMOXH

Internal Tool Holder - SDXCR/L (93°)

Price ab €26.00
Availability: 2147483640 In Stock

Boring Bar SDXCR/L
Cutting Angle 93°
Insert DC..
Hauptanwendung Back Boring
Clamping Screw Clamping
Cooling Without Cooling Holes
Packaging unit 1 Pc.

93° boring bar for Back Boring.

  d h L f Dmin Insert
S12K SDXCR-07 12 11 125 11 ≥17 DCM./DCG. 0702..
S12K SDXCL-07 12 11 125 11 ≥17 DCM./DCG. 0702..
S16P SDXCR-11 16 15 170 13 ≥21 DCM./DCG. 11T3..
S16P SDXCL-11 16 15 170 13 ≥21 DCM./DCG. 11T3..
S20R SDXCR-11 20 18 200 15 ≥25 DCM./DCG. 11T3..
S20R SDXCL-11 20 18 200 15 ≥25 DCM./DCG. 11T3..

Internal Tool Holder - PDUNR/L (93°)
Rinaldi-Tools GmbH

Internal Tool Holder - PDUNR/L (93°)

Price ab €65.50
Availability: 214748364 In Stock

Boring Bar PDUNR/L
Cutting Angle 93°
Insert DN..
Main application Profiling
Clamping Pin Lock
Cooling Without Cooling Hole
Packaging unit 1 Pc.

d L h f Dmin
S20Q-PDUNR/L 11 20 180 18 13 25
S20S-PDUNR/L 11
 20 250 18 13 25
S25Q-PDUNR/L 11
 25 180 23 17 32
S25T-PDUNR/L 11
 25 300 23 17 32
S32R-PDUNR/L 11
 32 200 30 22 40
S32U-PDUNR/L 11
 32 350 30 22 40
S32R-PDUNR/L 15
 32 200 30 22 40
S32U-PDUNR/L 15
 32 350 30 22 40
S40S-PDUNR/L 15
 40 250 37 27 50
S40V-PDUNR/L 15
 40 400 37 27 50
S50V-PDUNR/L 15 50 400 47 32 60

Internal Tool Holder - TDUNR/L (93°) with clamping
SMOXH

Internal Tool Holder - TDUNR/L (93°) with clamping

Price ab €54.00
Availability: 214748364 In Stock

Boring Bar TDUNR/L
Cutting Angle 93°
Insert DN..
Main application Profiling
Clamping Claw Clamping
Cooling Without Cooling Holes
Packaging unit 1 Pc.

Particularly suitable for roughing due to stable claw clamping.

  d h L f Dmin Insert
S25S TDUNR-11 25 23 250 19,5 ≥33 DNM. 1104..
S25S TDUNL-11 25 23 250 19,5 ≥33 DNM. 1104..
S32T TDUNR-11 32 30 300 24 ≥40
 DNM. 1104..
S32T TDUNL-11 32 30 300 24 ≥40 DNM. 1104..
S25S TDUNR-15 25 23 250 19,5 ≥39 DNM. 1506..
S25S TDUNL-15 25 23 250 19,5 ≥39 DNM. 1506..
S32T TDUNR-15 32 30 300 24 ≥40 DNM. 1506..
S32T TDUNL-15 32 30 300 24 ≥40 DNM. 1506..
S40U TDUNR-15 40 37 350 30 ≥50 DNM. 1506..
S40U TDUNL-15 40 37 350 30 ≥50 DNM. 1506..

Internal Tool Holder - PSKNR/L (75°)
Rinaldi-Tools GmbH

Internal Tool Holder - PSKNR/L (75°)

Price ab €63.00
Availability: 214748364 In Stock

Boring Bar PSKNR/L
Cutting Angle 75°
Insert SN.. 1204
Main application Longitudinal turning
Clamping Pin Lock
Cooling Without Cooling Hole
Packaging unit 1 Pc.

d L h f Dmin
S25Q-PSKNR/L 12 25 180 23 17 32
S25T-PSKNR/L 12 25 300 23 17 32
S32R-PSKNR/L 12 32 200 30 22 44
S32U-PSKNR/L 12 32 350 30 22 44
S40S-PSKNR/L 12 40 250 37 27 54
S40V-PSKNR/L 12 40 400 37 27 54

Internal Tool Holder - SVUCR/L (93°)
SMOXH

Internal Tool Holder - SVUCR/L (93°)

Price ab €45.00
Availability: 2147483638 In Stock

Boring Bar SVUCR/L
Cutting Angle 93°
Insert VC..
Main application Profile turning
Clamping Screw Clamping
Cooling Without Cooling Holes
Packaging unit 1 Pc.

d h L f Dmin Insert
S16P SVUCR/L-11 16 15 170 13 ≥21 VCM./VCG. 1103..
S20R SVUCR/L-11 20 18 200 15 ≥25 VCM./VCG. 1103..
S25S SVUCR/L-16 25 23 250 19,5 ≥32 VCM./VCG. 1604..
S32T SVUCR/L-16 32 30 300 24 ≥40 VCM./VCG. 1604..
S40U SVUCR/L-16 40 37 350 30 ≥50 VCM./VCG. 1604..

Internal Tool Holder - SVUBR/L (93°)
SMOXH

Internal Tool Holder - SVUBR/L (93°)

Price ab €45.00
Availability: 214748364 In Stock

Boring Bar SVUBR/L
Cutting Angle 93°
Insert VB..
Main Application Profiling
Clamping Screw Clamping
Cooling Without Cooling Holes
Packaging unit 1 Pc.

d h L f Dmin Insert
S16P SVUBR-11 16 15 170 13 ≥21 VBM. 1103..
S16P SVUBL-11 16 15 170 13 ≥21 VBM. 1103..
S20R SVUBR-11 20 18 200 15 ≥25 VBM. 1103..
S20R SVUBL-11 20 18 200 15 ≥25 VBM. 1103..
S25S SVUBR-16 25 23 250 19,5 ≥32 VBM. 1604..
S25S SVUBL-16 25 23 250 19,5 ≥32 VBM. 1604..
S32T SVUBR-16 32 30 300 24 ≥40 VBM. 1604..
S32T SVUBL-16 32 30 300 24 ≥40 VBM. 1604..
S40U SVUBR-16 40 37 350 30 ≥50 VBM. 1604..
S40U SVUBL-16 40 37 350 30 ≥50 VBM. 1604..

Internal Tool Holder - SVQBR/L (107,5°)
SMOXH

Internal Tool Holder - SVQBR/L (107,5°)

Price ab €34.00
Availability: 214748364 In Stock

Boring Bar SVQBR/L
Cutting Angle 107,5°
Insert VBMT 1103.../1604...
Main application Profiling
Clamping Screw Clamping
Cooling Without Cooling Holes
Packaging unit 1 Pc.

  d h L f Dmin
S16P SVQBR-11 16 15 170 13 ≥21
S16P SVQBL-11 16 15 170 13 ≥21
S20R SVQBR-11 20 18 200 15 ≥25
S20R SVQBL-11 20 18 200 15 ≥25
S25S SVQBR-16 25 23 250 19,5 ≥32
S25S SVQBL-16 25 23 250 19,5 ≥32
S32T SVQBR-16 32 30 300 24 ≥40
S32T SVQBL-16 32 30 300 24 ≥40

Internal Tool Holder - SVJBR/L (93°)
Rinaldi-Tools GmbH

Internal Tool Holder - SVJBR/L (93°)

Price ab €42.00
Availability: 2147483635 In Stock

Boring Bar SVJBR/L
Cutting Angle 93°
Insert VBMT 1604...
Main application Profiling
Clamping Screw Clamping
Packaging unit 1 Pc.

d h L f Dmin
S25S SVJBR-16-S 25 23 250 19,5 ≥32
S25S SVJBL-16-S 25 23 250 19,5 ≥32
S32T SVJBR-16 32 30 300 24 ≥40
S32T SVJBL-16 32 30 300 24 ≥40
S40U SVJBR-16 40 37 350 30 ≥50
S40U SVJBL-16 40 37 350 30 ≥50

Internal Tool Holder - SVXBR/L (52°)
SMOXH

Internal Tool Holder - SVXBR/L (52°)

Price ab €41.00
Availability: 214748364 In Stock

Boring Bar SVXBR/L
Cutting Angle 52°
Insert VB..
Hauptanwendung Back Boring
Clamping Screw Clamping
Cooling Without Cooling Holes
Packaging unit 1 Pc.

52° boring bar for Back Boring.

d h L f Dmin Wendeplatte
S20R SVXBR-11 20 18 200 15 ≥25 VB. 1103..
S20R SVXBL-11 20 18 200 15 ≥25 VB. 1103..

Internal Tool Holder - STFCR/L (90°)
SMOXH

Internal Tool Holder - STFCR/L (90°)

Price ab €22.00
Availability: 214748364 In Stock

Boring Bar STFCR/L
Cutting Angle 90°
Insert TC..
Main application Longitudinal turning
Clamping Screw Clamping
Cooling Without Cooling Holes
Packaging unit 1 Pc.

d h L f Dmin Insert
S10K STFCR 11 10 9 125 10 ≥13 TCG./TCM. 11..
S10K STFCL 11 10 9 125 10 ≥13 TCG./TCM. 11..
S12K STFCR 11 12 11 125 10 ≥17 TCG./TCM. 11..
S12K STFCL 11 12 11 125 10 ≥17 TCG./TCM. 11..
S16P STFCR 11 16 15 170 13 ≥21 TCG./TCM. 11..
S16P STFCL 11 16 15 170 13 ≥21 TCG./TCM. 11..

Internal Tool Holder - PWLNR/L (95°)
Rinaldi-Tools GmbH

Internal Tool Holder - PWLNR/L (95°)

Price ab €57.00
Availability: 214748364 In Stock

Boring Bar PWLNR/L
Cutting Angle 95°
Insert WN..
Main application Longitudinal turning, Facing
Clamping Pin Lock
Cooling Without Cooling Hole
Packaging unit 1 Pc.

d L h f Dmin
S16M-PWLNR/L 06 16 150 15 11 20
S20Q-PWLNR/L 06
 20 180 18 13 25
S20Q-PWLNR/L 06
 20 180 18 13 25
S25Q-PWLNR/L 06
 25 180 23 17 32
S25Q-PWLNR/L 06
 25 180 23 17 32
S20Q-PWLNR/L 08
 20 180 18 13 25
S20S-PWLNR/L 08
 20 250 18 13 25
S25Q-PWLNR/L 08
 25 180 23 17 32
S25T-PWLNR/L 08
 25 300 23 17 32
S32R-PWLNR/L 08
 32 200 30 22 40
S32U-PWLNR/L 08
 32 350 30 22 40
S40U-PWLNR/L 08
 40 350 37 30 50
S50U-PWLNR/L 08
 50 350 47 35 63
S50W-PWLNR/L 08
 50 450 47 35 63
Internal Tool Holder - TWLNR/L (95°) with clamping
SMOXH

Internal Tool Holder - TWLNR/L (95°) with clamping

Price ab €55.00
Availability: 10000000 In Stock
Boring Bar TWLNR/L
Cutting Angle 95°
Insert WN..
Main application Longitudinal turning, Facing
Clamping Claw Clamping
Cooling Without Cooling Holes
Packaging unit 1 Pc.

Particularly suitable for roughing due to stable claw clamping.

d h L f Dmin
S20R TWLNR/L-06 20 18 200 15 ≥26
S25S TWLNR/L-06 25 23 250 19,5 ≥36
S32T TWLNR/L-06 32 30 300 24 ≥44
S25S TWLNR/L-08 25 23 250 19,5 ≥38
S32T TWLNR/L-08 32 30 300 24 ≥44
S40U TWLNR/L-08 40 37 350 30 ≥50

Internal Tool Holder - CKUNR (93°)
SMOXH

Internal Tool Holder - CKUNR (93°)

Price ab €53.00
Availability: 214748364 In Stock

Boring Bar CKUNR
Setting Angle 93°
Insert KNUX L
Main application Longitudinal turning
Clamping Claw Clamping
Cooling Without Cooling Holes
Packaging unit 1 Pc.

  d h L f Dmin Insert
S25S CKUNR 16 25 23 250 21,5 ≥34 KNUX 1604.. L
S32T CKUNR 16 32 30 300 24 ≥40 KNUX 1604.. L
S40U CKUNR 16 40 37 350 30 ≥50 KNUX 1604.. L