There are 16 products.
| Boring Bar | PCLNR/L |
| Cutting Angle | 95° |
| Insert | CN.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Pin Lock |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| A25R PCLNR/L-12 with cooling holes |
25 | 23 | 200 | 17 | ≥32 | CNM. 1204.. |
| A32S PCLNR/L-12 with cooling holes |
32 | 30 | 250 | 22 | ≥40 | CNM. 1204.. |
| Boring Bar | SDQCR/L |
| Cutting Angle | 107,5° |
| Insert | DC.. |
| Main application | Profiling |
| Clamping | Screw Clamping |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| A10H SDQCR/L-07 with cooling holes | 10 | 09 | 100 | 08 | ≥13 | DCG./DCM. 07.. |
| A12H SDQCR/L-07 with cooling holes | 12 | 11 | 100 | 10 | ≥16 | DCG./DCM. 07.. |
| A16M SDQCR/L-07 with cooling holes | 16 | 15 | 150 | 13 | ≥21 | DCG./DCM. 07.. |
| A16M SDQCR/L-11 with cooling holes |
16 | 15 | 150 | 13 | ≥21 | DCG./DCM. 11.. |
| A20P SDQCR/L-11 with cooling holes |
20 | 18 | 170 | 15 | ≥25 | DCG./DCM. 11.. |
| A25R SDQCR/L-11 with cooling holes |
25 | 23 | 200 | 19,5 | ≥32 | DCG./DCM. 11.. |
| A32S SDQCR/L-11 with cooling holes | 32 | 30 | 250 | 24 | ≥40 | DCG./DCM. 11.. |
| Boring Bar | SDUCR/L |
| Cutting Angle | 93° |
| Insert | DC.. |
| Clamping | Screw Clamping |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| A10H SDUCR/L-07 mit IK | 10 | 09 | 100 | 08 | ≥13 | DCG./DCM. 07.. |
| A12H SDUCR/L-07 mit IK | 12 | 11 | 100 | 10 | ≥16 | DCG./DCM. 07.. |
| A16M SDUCR/L-07 mit IK | 16 | 15 | 150 | 13 | ≥21 | DCG./DCM. 07.. |
| A16M SDUCR/L-11 mit IK | 16 | 15 | 150 | 13 | ≥21 | DCG./DCM. 11.. |
| A20P SDUCR/L-11 mit IK | 20 | 18 | 170 | 15 | ≥25 | DCG./DCM. 11.. |
| A25R SDUCR/L-11 mit IK | 25 | 23 | 200 | 19,5 | ≥32 | DCG./DCM. 11.. |
| A32S SDUCR/L-11 mit IK | 32 | 30 | 250 | 24 | ≥40 | DCG./DCM. 11.. |
| External Tool Holder | SDJCR/L |
| Cutting Angle | 93° |
| Insert | DC. |
| Main application | Profiling |
| Clamping | Screw Clamp |
| Packaging unit | 1 Pc. |
| h=H | B | L | f | Insert | |
| SDJCR 1010 E07 | 10 | 10 | 70 | 12 | DCG./DCM. 07.. |
| SDJCR 1212 F07 | 12 | 12 | 80 | 15 | DCG./DCM. 07.. |
| SDJCR 1616 H07 | 16 | 16 | 100 | 20 | DCG./DCM. 07.. |
| SDJCR 1616 H11 | 16 | 16 | 100 | 20 | DCG./DCM. 11.. |
| SDJCL 1616 H11 | 16 | 16 | 100 | 20 | DCG./DCM. 11.. |
| SDJCR 2020 K11 | 20 | 20 | 125 | 25 | DCG./DCM. 11.. |
| SDJCL 2020 K11 | 20 | 20 | 125 | 25 | DCG./DCM. 11.. |
| SDJCR 2525 M11 | 25 | 25 | 150 | 30 | DCG./DCM. 11.. |
| SDJCL 2525 M11 | 25 | 25 | 150 | 30 | DCG./DCM. 11.. |
| External Tool Holder | PCLNR/L |
| Cutting Angle | 95° |
| Insert | CN.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Pin Lock |
| Packaging unit | 1 Pc. |
| h=H | B | L | f | Insert | |
| PCLNR 2020 K12 | 20 | 20 | 125 | 25 | CNM. 12.. |
| PCLNL 2020 K12 | 20 | 20 | 125 | 25 | CNM. 12.. |
| PCLNR 2525 M12 | 25 | 25 | 150 | 32 | CNM. 12.. |
| PCLNL 2525 M12 | 25 | 25 | 150 | 32 | CNM. 12.. |
| PCLNR 3225 P12 | 32 | 25 | 170 | 32 | CNM. 12.. |
| PCLNL 3225 P12 | 32 | 25 | 170 | 32 | CNM. 12.. |
| PCLNR 2525 M16 | 25 | 25 | 150 | 32 | CNM. 16.. |
| PCLNL 2525 M16 | 25 | 25 | 150 | 32 | CNM. 16.. |
| PCLNR 3232 P16 | 32 | 32 | 170 | 38 | CNM. 16.. |
| PCLNL 3232 P16 | 32 | 32 | 170 | 38 | CNM. 16.. |
| PCLNR 3232 P19 | 32 | 32 | 170 | 38 | CNM. 19.. |
| PCLNL 3232 P19 | 32 | 32 | 170 | 38 | CNM. 19.. |
| Boring Bar | SDXCR/L |
| Cutting Angle | 93° |
| Insert | DC.. |
| Hauptanwendung | Back Boring |
| Clamping | Screw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
93° boring bar for Back Boring.
| d | h | L | f | Dmin | Insert | |
| S12K SDXCR-07 | 12 | 11 | 125 | 11 | ≥17 | DCM./DCG. 0702.. |
| S12K SDXCL-07 | 12 | 11 | 125 | 11 | ≥17 | DCM./DCG. 0702.. |
| S16P SDXCR-11 | 16 | 15 | 170 | 13 | ≥21 | DCM./DCG. 11T3.. |
| S16P SDXCL-11 | 16 | 15 | 170 | 13 | ≥21 | DCM./DCG. 11T3.. |
| S20R SDXCR-11 | 20 | 18 | 200 | 15 | ≥25 | DCM./DCG. 11T3.. |
| S20R SDXCL-11 | 20 | 18 | 200 | 15 | ≥25 | DCM./DCG. 11T3.. |
| External Tool Holder | TCKNR/L |
| Cutting Angle | 75° |
| Insert | CN.. |
| Main application | Facing |
| Clamping | Claw Clamping |
| Packaging unit | 1 Pc. |
Tool holder with claw clamping 75° adjustment for facing and for using the secondary cutting edges
of CNMG/CNMM indexable inserts.
| h=H | B | L | f | |
| TCKNR 2020 K12 | 20 | 20 | 125 | 26 |
| TCKNL 2020 K12 | 20 | 20 | 125 | 26 |
| TCKNR 2525 M12 | 25 | 25 | 150 | 32 |
| TCKNL 2525 M12 | 25 | 25 | 150 | 32 |
| External Tool Holder | TCBNR/L |
| Cutting Angle | 75° |
| Insert | CN.. |
| Main application | Longitudinal turning |
| Clamping | Claw Clamping |
| Packaging unit | 1 Pc. |
Tool holder with claw clamp 75° adjustment for longitudinal turning and for using the secondary cutting edges
of CNMG/CNMM indexable inserts.
| h=H | B | L | f | |
| TCBNR 2525 M12 | 25 | 25 | 150 | 22,5 |
| TCBNL 2525 M12 | 25 | 25 | 150 | 22,5 |
| Boring Bar | TCLNR/L |
| Cutting Angle | 95° |
| Insert | CN.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Claw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
Particularly suitable for roughing due to stable claw clamping.
| d | h | L | f | Dmin | Insert | |
| S20R TCLNR-12 | 20 | 18 | 170 | 15 | ≥26 | CN.. 1204.. |
| S20R TCLNL-12 | 20 | 18 | 170 | 15 | ≥26 | CN.. 1204.. |
| S25S TCLNR-12 | 25 | 23 | 250 | 19,5 | ≥38 | CN.. 1204.. |
| S25S TCLNL-12 | 25 | 23 | 250 | 19,5 | ≥38 | CN.. 1204.. |
| S32T TCLNR-12 | 32 | 30 | 300 | 24 | ≥40 |
CN.. 1204.. |
| S32T TCLNL-12 | 32 | 30 | 300 | 24 | ≥40 | CN.. 1204.. |
| S40U TCLNR-12 | 40 | 37 | 350 | 30 | ≥50 | CN.. 1204.. |
| S40U TCLNL-12 | 40 | 37 | 350 | 30 | ≥50 | CN.. 1204.. |
| S40U TCLNR-16 | 40 | 37 | 350 | 30 | ≥44 | CN.. 1606.. |
| S40U TCLNL-16 | 40 | 37 | 350 | 30 | ≥44 | CN.. 1606.. |
| S50V TCLNR-12 | 50 | 47 | 400 | 38 | ≥63 | CN.. 1204.. |
| S50V TCLNL-12 | 50 | 47 | 400 | 38 | ≥63 | CN.. 1204.. |
| Boring Bar | SDUCR/L |
| Cutting Angle | 93° |
| Insert | DC.. |
| Main application | Profiling |
| Clamping | Screw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | |
| S10K SDUCR/L 07 | 10 | 9 | 125 | 08 | ≥13 |
| S12K SDUCR/L 07 | 12 | 11 | 125 | 10 | ≥16 |
| S16x10M SDUCR/L 07 | 16 | 15 | 150 | 8 | ≥13 |
| S16x12M SDUCR/L 07 | 16 | 15 | 150 | 10 | ≥16 |
| S16P SDUCR/L 07 | 16 | 15 | 170 | 13 | ≥21 |
| S20R SDUCR/L 07 | 20 | 18 | 200 | 15 | ≥25 |
| S16P SDUCR/L 11 | 16 | 15 | 170 | 13 | ≥21 |
| S20R SDUCR/L 11 | 20 | 18 | 200 | 15 | ≥25 |
| S25S SDUCR/L 11 | 25 | 23 | 250 | 19,5 | ≥32 |
| S32T SDUCR/L 11 | 32 | 30 | 300 | 24 | ≥40 |
| Boring Bar | SDQCR/L |
| Cutting Angle | 107,5° |
| Insert | DC.. |
| Main application | Profiling |
| Clamping | Screw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| S12K SDQCR/L-07 | 12 | 11 | 125 | 10 | ≥16 | DCG./DCM. 07.. |
| S16P SDQCR/L-07 | 16 | 15 | 170 | 13 | ≥21 | DCG./DCM. 07.. |
| S16P SDQCR/L-11 |
16 | 15 | 170 | 13 | ≥21 | DCG./DCM. 11.. |
| S20R SDQCR/L-11 |
20 | 18 | 200 | 15 | ≥25 | DCG./DCM. 11.. |
| S25S SDQCR/L-11 |
25 | 23 | 250 | 19,5 | ≥32 | DCG./DCM. 11.. |
| External Tool Holder | TCLNR/L |
| Cutting Angle | 95° |
| Insert | CN.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Claw Clamping |
| Packaging unit | 1 Pc. |
Especially suitable for roughing due to stable claw clamping.
| h=H | B | L | f | Insert | |
| TCLNR 2020 K12 | 20 | 20 | 125 | 26 | CN.. 1204.. |
| TCLNL 2020 K12 | 20 | 20 | 125 | 26 | CN.. 1204.. |
| TCLNR 2525 M12 | 25 | 25 | 150 | 32 | CN.. 1204.. |
| TCLNL 2525 M12 | 25 | 25 | 150 | 32 | CN.. 1204.. |
| Boring Bar | SPCLNR/L |
| Cutting Angle | 95° |
| Insert | CN.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Pin Lock |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| S25S PCLNR/L 12 | 25 | 23 | 250 | 17 | ≥32 | CN.. 12.. |
| S32T PCLNR/L 12 | 32 | 30 | 300 | 22 | ≥40 | CN.. 12.. |
| S40U PCLNR/L 12 | 40 | 37 | 350 | 27 | ≥50 | CN.. 12.. |
| S40U PCLNR/L 16 | 40 | 37 | 350 | 27 | ≥50 | CN.. 16.. |
| External Tool Holder | SDHCR/L |
| Cutting Angle | 107,5° |
| Insert | DC. |
| Main application | Longitudinal turning |
| Clamping | Screw Clamp |
| Packaging unit | 1 Pc. |
| h=H | B | L | f | Insert | |
| SDJCR 2020 K11 | 20 | 20 | 125 | 25 | DCG./DCM. 11.. |
| SDJCL 2020 K11 | 20 | 20 | 125 | 25 | DCG./DCM. 11.. |
| SDJCR 2525 M11 | 25 | 25 | 150 | 29 | DCG./DCM. 11.. |
| SDJCL 2525 M11 | 25 | 25 | 150 | 29 | DCG./DCM. 11.. |
| Boring Bar | E-SDQCR/L |
| Setting Angle | 107,5° |
| Insert | DC.. |
| Main application | Profile turning |
| Clamping | Screw Clamp |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
Solid carbide boring bar
Solid carbide tool carriers increase stability considerably.
The carbide boring bar allows a projection length of up to 6xD by reducing vibrations.
Precision and surface quality are also improved.
| d | L | f | D/min | |
| E10M SDQCR/L-07 with cooling holes | 10 | 150 | 08 | ≥13 |
| E12Q SDQCR/L-07 with cooling holes | 12 | 180 | 10 | ≥16 |
| E16R SDQCR/L-11 with cooling holes | 16 | 200 | 13 | ≥21 |
| Boring Bar | E-SDUCR/L |
| Setting Angle | 93° |
| Insert | DC.. |
| Main application | Profile turning |
| Clamping | Screw Clamp |
| Cooling | With internal coolant feed |
| Packaging unit | 1 Pc. |
Solid carbide boring bar
Solid carbide tool carriers increase stability considerably.
The carbide boring bar allows a projection length of up to 6xD by reducing vibrations.
Precision and surface quality are also improved.
| d | L | f | Dmin | |
| E10M SDUCR/L-07 | 10 | 150 | 08 | ≥13 |
| E12Q SDUCR/L-07 | 12 | 180 | 10 | ≥16 |
| E16R SDUCR/L-11 | 16 | 200 | 13 | ≥21 |
| E20S SDUCR/L-11 | 20 | 250 | 15 | ≥25 |
English
Deutsch
