| Shape | SNGY |
| Processing | Finish |
|
Grades |
RT305H: PVD grade M20-M30 for stainless steel with the most modern coating |
| Packaging unit | 10 Pc. |
- Wiper geometry with large radius for excellent surface finishes
- Low cutting forces through positive cutting edge design
- Complex chipbreaker for controlled chip evacuation
| L | I.C | S | d | r | |
| SNGY 12T508-F RT305H | 12,7 | 12,7 | 6,36 | 4,7 | 0,8 |
| Item Nr. | L | I.C | S | d | r | |
| SNGY 12T508-F RT305H | 2651372 | 12,7 | 12,7 | 6,36 | 4,7 | 0,8 |
| Steel | Stainless Steel | Superalloys | |||||||
| Vc (m/min) | fz (mm) | ap max (mm) | Vc (m/min) | fz (mm) | ap max (mm) | Vc (m/min) | fz (mm) | ap max (mm) | |
| SNGY 12T508-F RT305H | 80-255 | 0,1-0,12 | 8 | 95-130 | 0,1 | 8 | 30-75 | 0,1 | 8 |
| Shape | SNGY |
| Processing | Finish |
|
Grades |
RT305H: PVD grade M20-M30 for stainless steel with the most modern coating |
| Packaging unit | 10 Pc. |
- Wiper geometry with large radius for excellent surface finishes
- Low cutting forces through positive cutting edge design
- Complex chipbreaker for controlled chip evacuation
| L | I.C | S | d | r | |
| SNGY 12T508-F RT305H | 12,7 | 12,7 | 6,36 | 4,7 | 0,8 |
| Shape | APGT |
| Processing | Finish |
| Workpiece Material | NF-Materials |
| Packaging unit | 10 Pc. |
| L | d | s | d1 | r | |
| APGT 100305PDTR-AL RT110 | 10,95 | 6,7 | 3,5 | 2,8 | 0,5 |
| Shape | SPMR |
| Processing | Medium |
| Workpiece Material | Steel |
| Grade | RT250: CVD-coated P25-TIN hard metal for general steel processing |
| Packaging unit | 10 Pc. |
| r | L | I.C. | S | |
| SPMR 120308-PM RT250 | 0,8 | 12,7 | 12,7 | 3,18 |
| Shape | SNGY |
| Processing | Roughing |
|
Grades |
RT305H: PVD grade M20-M30 for stainless steel with the most modern coating |
| Packaging unit | 10 Pc. |
- Wiper geometry with large radius for excellent surface finishes
- Low cutting forces through positive cutting edge design
- Complex chipbreaker for controlled chip evacuation
| L | I.C | S | d | r | |
| SNGY 12T508-R RT305H | 12,7 | 12,7 | 6,36 | 4,7 | 0,8 |
| Grooving Insert | RT22R/L RT305 |
| Workpiece Materials | Steel and Stainless Steel |
| Grooving system | RT-System |
| Grade | RT305 = PVD grade M20-M30 for stainless steel with the most modern coating |
| Packaging unit | 5 Pc. |
| W±0,025 | r | La max | øI.C | S | |
| RT22L100-R02 RT305 | 1,0 | 0,2 | 2 | 12,7 | 4,76 |
| RT22R125-R02 RT305 | 1,25 | 0,2 | 2 | 12,7 | 4,76 |
| RT22L125-R02 RT305 | 1,25 | 0,2 | 2 | 12,7 | 4,76 |
| RT22R145-R02 RT305 | 1,45 | 0,2 | 2 | 12,7 | 4,76 |
| RT22L145-R02 RT305 | 1,45 | 0,2 | 2 | 12,7 | 4,76 |
| RT22R150-R02 RT305 | 1,5 | 0,2 | 3,5 | 12,7 | 4,76 |
| RT22L150-R02 RT305 | 1,5 | 0,2 | 3,5 | 12,7 | 4,76 |
| RT22R175-R02 RT305 | 1,75 | 0,2 | 3,5 | 12,7 | 4,76 |
| RT22L175-R02 RT305 | 1,75 | 0,2 | 3,5 | 12,7 | 4,76 |
| RT22R185-R02 RT305 | 1,85 | 0,2 | 3,5 | 12,7 | 4,76 |
| RT22L185-R02 RT305 | 1,85 | 0,2 | 3,5 | 12,7 | 4,76 |
| RT22R195-R02 RT305 | 1,95 | 0,2 | 3,5 | 12,7 | 4,76 |
| RT22R200-R02 RT305 | 2,0 | 0,2 | 3,5 | 12,7 | 4,76 |
| RT22L200-R02 RT305 | 2,0 | 0,2 | 3,5 | 12,7 | 4,76 |
| RT22R225-R02 RT305 | 2,25 | 0,2 | 3,5 | 12,7 | 4,76 |
| RT22R230-R02 RT305 | 2,3 | 0,2 | 3,5 | 12,7 | 4,76 |
| RT22L230-R02 RT305 | 2,3 | 0,2 | 3,5 | 12,7 | 4,76 |
| RT22R250-R03 RT305 | 2,5 | 0,3 | 4 | 12,7 | 4,76 |
| RT22L250-R03 RT305 | 2,5 | 0,3 | 4 | 12,7 | 4,76 |
| RT22R265-R03 RT305 | 2,65 | 0,3 | 4 | 12,7 | 4,76 |
| RT22L265-R03 RT305 | 2,65 | 0,3 | 4 | 12,7 | 4,76 |
| RT22R280-R03 RT305 | 2,8 | 0,3 | 4 | 12,7 | 4,76 |
| RT22L280-R03 RT305 | 2,8 | 0,3 | 4 | 12,7 | 4,76 |
| RT22R300-R03 RT305 | 3,0 | 0,3 | 4 | 12,7 | 4,76 |
| RT22L300-R03 RT305 | 3,0 | 0,3 | 4 | 12,7 | 4,76 |
| RT22R320-R03 RT305 | 3,2 | 0,3 | 4 | 12,7 | 4,76 |
| RT22L320-R03 RT305 | 3,2 | 0,3 | 4 | 12,7 | 4,76 |
| RT22R330-R03 RT305 | 3,3 | 0,3 | 4 | 12,7 | 4,76 |
| RT22L330-R03 RT305 | 3,3 | 0,3 | 4 | 12,7 | 4,76 |
| RT22R350-R03 RT305 | 3,5 | 0,3 | 5 | 12,7 | 4,76 |
| RT22L350-R03 RT305 | 3,5 | 0,3 | 5 | 12,7 | 4,76 |
| RT22R400-R04 RT305 | 4,0 | 0,4 | 5 | 12,7 | 4,76 |
| RT22L400-R04 RT305 | 4,0 | 0,4 | 5 | 12,7 | 4,76 |
| RT22R430-R04 RT305 | 4,3 | 0,4 | 5 | 12,7 | 4,76 |
| RT22L430-R04 RT305 | 4,3 | 0,4 | 5 | 12,7 | 4,76 |
| RT22R450-R04 RT305 | 4,5 | 0,4 | 5 | 12,7 | 4,76 |
| RT22L450-R04 RT305 | 4,5 | 0,4 | 5 | 12,7 | 4,76 |
| RT22R480-R04 RT305 | 4,8 | 0,4 | 5 | 12,7 | 5,06 |
| RT22L480-R04 RT305 | 4,8 | 0,4 | 5 | 12,7 | 5,06 |
| Shape | SNEG |
|
Grades |
RT250X = PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel |
| RT150K = CVD-coated K10-K20 carbide for rough cast machining | |
| RT305 = PVD grade M20-M30 for stainless steel with the most modern coating | |
| Packaging unit | 10 Pc. |
| L | I.C | S | d | r | |
| SNEG1205-GM RT150K | 7,6 | 12 | 4,76 | 4,6 | 0,8 |
| SNEG1205-GM RT250X | 7,6 | 12 | 4,76 | 4,6 | 0,8 |
| SNEG1205-GM RT305H | 7,6 | 12 | 4,76 | 4,6 | 0,8 |
| Shape | XPHT |
| Workpiece Material | Steel and Stainless Steel |
| Grade | RT302: PVD-coated carbide grade for P15-P30 & M25-M40, suitable for medium to rough machining of stainless steel and steel (milling). |
| Packaging unit | 10 Pc. |
| r | a | L | S | d | |
| XPHT16R0803-GM RT302 | 8 | 9 | 16 | 3,18 | 3,1 |
| XPHT20R10T3-GM RT302 | 10 | 9 | 20 | 3,97 | 4 |
| XPHT25R1204-GM RT302 | 12,5 | 9 | 25 | 4,76 | 4,7 |
| Shape | SEET |
| Grades | RT100: Uncoated K10-K15 carbide for aluminum and plastics |
| RT150K: CVD-coated K10-K20 carbide for cast iron machining | |
| RT250X: PVD-Multilayer Beschichtetes P10-P30 und M10-M30 Hartmetall für die Universelle Anwendung in Stahl und Edelstahl | |
| RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel | |
| RTC-Cermet: RTC-Uncoated cermet grade for precision machining in steel and stainless steel | |
| RT300P: CVD-coated P25-P35-TIN carbide for roughing in steel and in interrupted cuts | |
| RT400P: PVD-coated P40 carbide grade for rough steel machining | |
| RT350M: CVD-coated M20-M35 carbide for milling in stainless steel | |
| Packagig Unit | 10 pc. |
| L | I.C | S | d | |
| SEET 12T3-DM RT250X | 13,4 | 13,4 | 3,97 | 4,1 |
| SEET 12T3-PM RT300 | 13,4 | 13,4 | 3,97 | 4,1 |
| SEET 12T3-DF RTC-Cermet | 13,4 | 13,4 | 3,97 | 4,1 |
| SEET 12T3-DM RT300P | 13,4 | 13,4 | 3,97 | 4,1 |
| SEET 12T3-DM RT400P | 13,4 | 13,4 | 3,97 | 4,1 |
| SEET 12T3-EM RT350M | 13,4 | 13,4 | 3,97 | 4,1 |
| SEET 12T3-ALZ RT100 | 13,4 | 13,4 | 3,97 | 4,1 |
| SEET 12T3-DM RT150K | 13,4 | 13,4 | 3,97 | 4,1 |
| Shape | APKT |
| Workpiece Materials |
RT250X: Steel and Stainless Steel RT250K: Cast Iron |
| Grades |
RT250X = PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel RT250K = CVD-coated K25 carbide for rough cast machining |
| Packaging unit | 10 Pc. |
| L | d | s | d1 | r | |
| APKT 070204-PF RT250X | 7,28 | 4,34 | 2,38 | 2 | 0,4 |
| APKT 070204-PF RT250K | 7,28 | 4,34 | 2,38 | 2 | 0,4 |
| Shape | APKT |
|
Grades |
RT250X = PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel |
| RT250K = CVD-coated K10-K20 carbide for rough cast machining | |
| RT100 = Uncoated K10-K15 carbide for ALU and plastics | |
| RT305H: PVD-coated high-performance grade for a wide range of applications. | |
| Packaging unit | 10 Pc. |
| L | d | s | I.W | r | |
| APKT 11T304-PF RT250X | 12,24 | 2,8 | 3,6 | 6,5 | 0,4 |
| APKT 11T308-PM RT250X | 12,24 | 2,8 | 3,6 | 6,5 | 0,8 |
| APKT 11T312-PM RT250X | 12,24 | 2,8 | 3,6 | 6,5 | 1,2 |
| APKT 11T316-PM RT250X | 12,24 | 2,8 | 3,6 | 6,5 | 1,6 |
| APKT 11T320-PM RT250X | 12,24 | 2,8 | 3,6 | 6,5 | 2,0 |
| APKT 11T304-PM RT150K | 12,24 | 2,8 | 3,6 | 6,5 | 0,4 |
| APKT 11T308-PM RT150K | 12,24 | 2,8 | 3,6 | 6,5 | 0,8 |
| APKT 11T312-PM RT150K | 12,24 | 2,8 | 3,6 | 6,5 | 1,2 |
| APKT 11T316-PM RT150K | 12,24 | 2,8 | 3,6 | 6,5 | 1,6 |
| APKT 11T320-PM RT150K | 12,24 | 2,8 | 3,6 | 6,5 | 2,0 |
| APKT 11T304-ALZ RT100 | 12,24 | 2,8 | 3,6 | 6,5 | 0,4 |
| APKT 11T308-ALZ RT100 | 12,24 | 2,8 | 3,6 | 6,5 | 0,8 |
| APKT 11T308-PM RT305H | 12,24 | 2,8 | 3,6 | 6,5 | 0,8 |
| APKT 11T316-PM RT305H | 12,24 | 2,8 | 3,6 | 6,5 | 1,6 |
| Shape | SNMU |
| Processing | Finish/Medium |
|
Grade |
RT250X: PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
- Maximale Wirtschaftlichkeit dank 8 Schneidkanten
- Minimierte Schnittkräfte und erhöhte Prozesssicherheit durch optimierte 3D-Kontur der Schneide
- Wiper-geometry for ecellent surface quality
| L | I.C | S | d | r | |
| SNMU 130520-PL RT250X | 13,5 | 13,5 | 5,28 | 4,7 | 2,0 |
| Shape | RDKW |
| Processing | Medium |
| Workpiece Material | Hard Materials |
| Grade | RT105H: PVD-TiALN coated M10-M20 carbide for hard materials |
| Packaging unit | 10 Pc. |
| I.C | S | d | |
| RDKW 0702MO RT105H HART | 7 | 2,38 | 2,7 |
| RDKW 1003MO RT105H HART | 10 | 3,18 | 3,9 |
| RDKW 10T3MO RT105H HART | 10 | 3,97 | 4,4 |
| RDKW 12T3MO RT105H HART | 12 | 3,97 | 3,9 |
| RDKW 1204MO RT105H HART | 12 | 4,76 | 4,4 |
| RDKW 1604MO RT105H HART | 16 | 4,76 | 5,2 |
| Plattenform | SEHT |
| Sorten | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| RT100: uncoated K10-K15 carbide for ALU and non-ferrous metals | |
| VPE | 10 Stück |
| IC | S | BS | |
| SEHT 1204AFTN RT300 | 12,7 | 4,76 | 1,65 |
| SEHT 1204AFEN-ALZ RT100 | 12,7 | 4,76 | 1,65 |
| Shape | XOKT |
| Workpiece Materials |
RT330: Steel and Stainless Steel |
|
RT350: Steel, Stainless Steel and special materials |
|
| Grades |
RT330: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
|
RT350: PVD-coated M15-M30 and S15-S30 for universal use in steel, stainless steel and special materials |
|
| Packaging unit | 10 Pc. |
| L | W | s | r | |
| XOKT 120408-M RT330 | 12 | 8,2 | 5,07 | 0,8 |
| XOKT 120431-M RT350 | 12 | 8,2 | 5,07 | 3,1 |
| Shape | RDHT |
| Processing | Medium |
| Workpiece Material | Aluminum, Plastics and NF-Metals |
| Grade | RT100: Uncoated K10-K15 carbide for aluminum and plastics |
| Packaging unit | 10 Pc. |
| I.C | S | d | |
| RDHT 0702MO-ALZ RT100 | 7 | 2,38 | 2,7 |
| RDHT 1003MO-ALZ RT100 | 10 | 3,18 | 3,9 |
| RDHT 12T3MO-ALZ RT100 | 12 | 3,97 | 3,9 |
| RDHT 1604MO-ALZ RT100 | 16 | 4,76 | 5,2 |
| Shape | RDKW |
| Processing | Medium |
| Workpiece Material | Steel and Cast Iron |
| Grade | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| I.C | S | d | |
| RDKW 0803MO RT300 | 8 | 3,18 | 3,4 |
| RDKW 10T3MO RT300 | 10 | 3,97 | 4,1 |
| RDKW 1204MO RT300 | 12 | 4,76 | 4,4 |
| Grooving Insert | RT22R/L RT305 |
| Workpiece Materials | Steel and Stainless Steel |
| Grooving system | RT-System |
| Grade | RT305 = PVD grade M20-M30 for stainless steel with the most modern coating |
| Packaging unit | 5 Pc. |
| W±0,025 | r | La max | øI.C | S | |
| RT22R100R RT305 | 1 | 0,5 | 2 | 12,7 | 4,76 |
| RT22L100R RT305 | 1 | 0,5 | 2 | 12,7 | 4,76 |
| RT22R150R RT305 | 1,5 | 0,75 | 3,5 | 12,7 | 4,76 |
| RT22L150R RT305 | 1,5 | 0,75 | 3,5 | 12,7 | 4,76 |
| RT22R170R RT305 | 1,7 | 0,85 | 3,5 | 12,7 | 4,76 |
| RT22R200R RT305 | 2 | 1 | 3,5 | 12,7 | 4,76 |
| RT22L200R RT305 | 2 | 1 | 3,5 | 12,7 | 4,76 |
| RT22R250R RT305 | 2,5 | 1,25 | 4 | 12,7 | 4,76 |
| RT22L250R RT305 | 2,5 | 1,25 | 4 | 12,7 | 4,76 |
| RT22R300R RT305 | 3 | 1,5 | 4 | 12,7 | 4,76 |
| RT22L300R RT305 | 3 | 1,5 | 4 | 12,7 | 4,76 |
| RT22R320R RT305 | 3,2 | 1,6 | 4 | 12,7 | 4,76 |
| RT22R400R RT305 | 4 | 2 | 5 | 12,7 | 4,76 |
| RT22L400R RT305 | 4 | 2 | 5 | 12,7 | 4,76 |
Deutsch
English