There are 268 products.
| Grooving Insert | MGGN |
| Workpiece Materials | Hard Materials |
| Grade | RTC20=CBN fine grain grade for grooving in hardened steel, also in interrupted cut |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 1 Pc. |
| B | R | L | S | Scope of application | |
| MGGN 200-CBN RTC20 | 2 | 0,2 | 16 | 4,8 | Hard Materials |
| MGGN 300-CBN RTC20 | 3 | 0,4 | 21 | 4,8 | Hard Materials |
| Shape | VBGT |
| Processing | High Speed Alu Turning |
| Workpiece Material | Aluminum, NF-Materials |
| Grade | RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic |
| Packaging unit | 2 Pc. |
PCD = Polycrystalline diamond (PCD) is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix.
| r | L | I.C | S | d | |
| VBGT 160402-1N RTD10 | 0,2 | 2,5 | 9,525 | 4,76 | 4,4 |
| VBGT 160404-1N RTD10 | 0,4 | 2,5 | 9,525 | 4,76 | 4,4 |
| VBGT 160408-1N RTD10 | 0,8 | 2,5 | 9,525 | 4,76 | 4,4 |
| External Tool Holder | PDNNN |
| Cutting Angle | 62,5° |
| Insert | DN.. |
| Main application | Longitudinal turning |
| Clamping | Pin Lock |
| Packaging unit | 1 Pc. |
| h=H | B | L | f | Insert | |
| PDNNN 2020 K15 | 20 | 20 | 125 | 10 | DN.. 1506.. |
| PDNNN 2525 M15 | 25 | 25 | 150 | 12,5 | DN.. 1506.. |
| Shape | VCGW |
| Scope of application | Hard turning |
| Number of cutting edges | 2 |
| Grade | RTC20T : TIN-coated CBN for full to lightly interrupted cuts in hardened steels |
| Packaging unit | 2 Pc |
| I.C. | S | r | d | L | |
| VCGW 110304-2N RTC20T | 6,35 | 3,18 | 0,4 | 2,8 | 2,2 |
| VCGW 110308-2N RTC20T | 6,35 | 3,18 | 0,8 | 2,8 | 2,2 |
| VCGW 160404-2N RTC20T | 9,525 | 4,76 | 0,4 | 4,4 | 2,2 |
| VCGW 160408-2N RTC20T | 9,525 | 4,76 | 0,8 | 4,4 | 2,2 |
| Insert size | 16 |
| Inside/Outside Thread | Outside |
| Direction | Left |
| Thread Type | Imperial |
| Profile | Full profile |
| Workpiece Materials | Steel and Stainless Steel |
| Flank angle | 55° |
| ISO | Pitch | I.C | S | d | |
| 16IL-V-BSW-11 RT315 (55°) | 16 | 11-Gang | 9,525 | 3,52 | 4 |
| 16IL-V-BSW-14 RT315 (55°) | 16 | 14-Gang | 9,525 | 3,52 | 4 |
| 16IL-V-BSW-19 RT315 (55°) | 16 | 19-Gang | 9,525 | 3,52 | 4 |
RT315 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel
Packaging unit = 2 Pc.
MGMN 200-AL RT100 - Alluminium / Plastic / Non-ferrite Materials - Ground, sharp cutting edge with large rake angle
MGMN 200-C RT300 - Steel & Cast Iron - Stable cutting edge, grooving even with interrupted cuts
MGMN 200-J RT300 - Steel & Stainless Steel - Soft-cutting geometry for grooving and parting off
MGMN 200-M RT300 - Steel & Stainless Steel - Grooving, for universal use
MRMN 200 RT300 - Steel & Stainless Steel - Grooving, for universal use
Holder of your Choice:
| d | D | L | l | h | f | t max | D min | |
| BIKTR/L 16-K2C Stechbreite 2mm |
16 | 20 | 150 | 33 | 15 | 11,5 | 4 | 20 |
| BIKTR/L 20-K2C Stechbreite 2mm |
20 | 16 | 170 | 33 | 18 | 14,5 | 6 | 26 |
Packaging unit = 1 Pc.
| Shape | CCGT |
| Workpiece Material | NF-Materials |
| Grade | RT100: Uncoated K10-K15 carbide for ALU and plastics |
| Packaging unit | 10 Pc. |
| r | L | I.C | S | d | |
| CCGT 060202-ALZ RT100 | 0,2 | 6,4 | 6,35 | 2,38 | 2,8 |
| CCGT 060204-ALZ RT100 | 0,4 | 6,4 | 6,35 | 2,38 | 2,8 |
| CCGT 060208-ALZ RT100 | 0,8 | 6,4 | 6,35 | 2,38 | 2,8 |
| CCGT 09T302-ALZ RT100 | 0,2 | 9,7 | 9,525 | 3,97 | 4,4 |
| CCGT 09T304-ALZ RT100 | 0,4 | 9,7 | 9,525 | 3,97 | 4,4 |
| CCGT 09T308-ALZ RT100 | 0,8 | 9,7 | 9,525 | 3,97 | 4,4 |
| CCGT 120404-ALZ RT100 | 0,4 | 12,9 | 12,7 | 4,76 | 5,56 |
| CCGT 120408-ALZ RT100 | 0,8 | 12,9 | 12,7 | 4,76 | 5,56 |
| Boring Bar | PCLNR/L |
| Cutting Angle | 95° |
| Insert | CN.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Pin Lock |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| A25R PCLNR/L-12 with cooling holes |
25 | 23 | 200 | 17 | ≥32 | CNM. 1204.. |
| A32S PCLNR/L-12 with cooling holes |
32 | 30 | 250 | 22 | ≥40 | CNM. 1204.. |
| Shape | CCGT |
| Processing | Medium and Finish |
| Workpiece Material | NF-Materials, Stainless Steel and Special Materials |
| Grade | RT105C: PVD-TiALN coated M10-M20 carbide for ALU / stainless steel |
| Packaging unit | 10 Pc. |
| r | L | I.C | S | d | |
| CCGT 060202-ALM RT105C | 0,2 | 6,4 | 6,35 | 2,38 | 2,8 |
| CCGT 060204-ALM RT105C | 0,4 | 6,4 | 6,35 | 2,38 | 2,8 |
| CCGT 09T302-ALM RT105C | 0,2 | 9,7 | 9,525 | 3,97 | 4,4 |
| CCGT 09T304-ALM RT105C | 0,4 | 9,7 | 9,525 | 3,97 | 4,4 |
| CCGT 09T308-ALM RT105C | 0,8 | 9,7 | 9,525 | 3,97 | 4,4 |
| CCGT 120404-ALM RT105C | 0,4 | 12,9 | 12,7 | 4,76 | 5,56 |
| CCGT 120408-ALM RT105C | 0,8 | 12,9 | 12,7 | 4,76 | 5,56 |
| Grooving Insert | MRMN... |
| Workpiece Materials | Steel/Stainless Steel |
| Grade | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Grooving, for universal use
| B | R | L | S | |
| MRMN 200-M RT300 | 2 | 1 | 16 | 3,5 |
| MRMN 300-M RT300 | 3 | 1,5 | 21 | 4,8 |
| MRMN 400-M RT300 | 4 | 2 | 21 | 4,8 |
| MRMN 500-M RT300 | 5 | 2,5 | 25,85 | 5,8 |
| Plate Shape | VBGW |
| Processing | High Speed Alu Turning |
| Material | Aluminum, NF-Materials |
| Coating | RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic |
| Packaging unit | 2 Pc. |
PCD = Polycrystalline diamond (PCD) is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix.
| r | L | I.C | S | d | |
| VBGW 160402-1N RTD10 | 0,2 | 2,5 | 9,525 | 4,76 | 4,4 |
| VBGW 160404-1N RTD10 | 0,4 | 2,5 | 9,525 | 4,76 | 4,4 |
| VBGW 160408-1N RTD10 | 0,8 | 2,5 | 9,525 | 4,76 | 4,4 |
| External Tool Holder | SDHCR/L |
| Cutting Angle | 107,5° |
| Insert | DC. |
| Main application | Longitudinal turning |
| Clamping | Screw Clamp |
| Packaging unit | 1 Pc. |
| h=H | B | L | f | Insert | |
| SDHCR 2020 K11 | 20 | 20 | 125 | 25 | DCG./DCM. 11.. |
| SDHCL 2020 K11 | 20 | 20 | 125 | 25 | DCG./DCM. 11.. |
| SDHCR 2525 M11 | 25 | 25 | 150 | 29 | DCG./DCM. 11.. |
| SDHCL 2525 M11 | 25 | 25 | 150 | 29 | DCG./DCM. 11.. |
| Shape | CNMG |
| Processing | Roughing |
| Workpiece Material | Stainless Steel |
| Grade | RT250M: PVD coated M20-M30 carbide. |
| Packaging unit | 10 Pc. |
| r | L | I.C. | S | d | |
| CNMG 120408-MR RT250M | 0,8 | 12,9 | 12,7 | 4,76 | 5,16 |
| CNMG 120412-MR RT250M | 1,2 | 12,9 | 12,7 | 4,76 | 5,16 |
| Shape | VBGW |
| Scope of application | Hard turning |
| Cutting edges | 2 |
| Grade | RTC20T : TIN-coated CBN for full to lightly interrupted cuts in hardened steels |
| Packaging unit | 2 Pc |
| I.C. | S | r | d | L | |
| VBGW 160402-2N RTC20T | 9,525 | 4,76 | 0,2 | 4,4 | 2,2 |
| VBGW 160404-2N RTC20T | 9,525 | 4,76 | 0,4 | 4,4 | 2,2 |
| VBGW 160408-2N RTC20T | 9,525 | 4,76 | 0,8 | 4,4 | 2,2 |
| Boring Bar | TCLNR/L |
| Cutting Angle | 95° |
| Insert | CN.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Claw Clamping |
| Cooling | Without Cooling Holes |
| Packaging unit | 1 Pc. |
Particularly suitable for roughing due to stable claw clamping.
| d | h | L | f | Dmin | Insert | |
| S20R TCLNR-12 | 20 | 18 | 200 | 15 | ≥26 | CN.. 1204.. |
| S20R TCLNL-12 | 20 | 18 | 200 | 15 | ≥26 | CN.. 1204.. |
| S25S TCLNR-12 | 25 | 23 | 250 | 19,5 | ≥38 | CN.. 1204.. |
| S25S TCLNL-12 | 25 | 23 | 250 | 19,5 | ≥38 | CN.. 1204.. |
| S32T TCLNR-12 | 32 | 30 | 300 | 24 | ≥40 |
CN.. 1204.. |
| S32T TCLNL-12 | 32 | 30 | 300 | 24 | ≥40 | CN.. 1204.. |
| S40U TCLNR-12 | 40 | 37 | 350 | 30 | ≥50 | CN.. 1204.. |
| S40U TCLNL-12 | 40 | 37 | 350 | 30 | ≥50 | CN.. 1204.. |
| S40U TCLNR-16 | 40 | 37 | 350 | 30 | ≥44 | CN.. 1606.. |
| S40U TCLNL-16 | 40 | 37 | 350 | 30 | ≥44 | CN.. 1606.. |
| S50V TCLNR-12 | 50 | 47 | 400 | 38 | ≥63 | CN.. 1204.. |
| S50V TCLNL-12 | 50 | 47 | 400 | 38 | ≥63 | CN.. 1204.. |
Packaging unit = 1 Pc.
Inserts of your Choice:
MGMN 300-AL RT100 - Non Ferrite Materials
MGMN 300-C RT300 - STEEL & CAST IRON
MGMN 300-J RT300 - STEEL & STAINLESS STEEL
MGMN 300-M RT300 - STEEL & STAINLESS STEEL
MRMN 300 RT300 - STEEL & STAINLESS STEEL
Holder of your Choice:
| d | D | L | l | h | f | t max | D min | |
| BIKTR/L 20-K3C 3mm |
20 | 26 | 170 | 33 | 18 | 15 | 6 | 26 |
| BIKTR/L 25-K3C 3mm |
25 | 32 | 200 | 45 | 23 | 18,5 | 7 | 32 |
| BIKTR/L 32-K3C 3mm | 32 | 40 | 250 | 49 | 30 | 22 | 8 | 40 |
| Grooving Holder | QE...R/L |
| Application | Outside Grooving |
| Grooving System | Z-System |
| Grooving Insert | Z...D RT250X |
| Packaging Unit | 1 Pc. |
| HxB | L | S | Width | ar max | |
| QEED1616R/L17 | 16x16 | 125 | 15 | 2,5 | 17 |
| QEED2020R/L17 | 20x20 | 125 | 19 | 2,5 | 17 |
| QEED2525R/L17 | 25x25 | 150 | 19 | 2,5 | 17 |
| QEFD1616R/L17 | 16x16 | 125 | 14,8 | 3 | 17 |
| QEFD2020R/L17 | 20x20 | 125 | 18,8 | 3 | 17 |
| QEFD2525R/L17 | 25x25 | 150 | 23,8 | 3 | 17 |
| QEGD2020R/L13 | 20x20 | 140 | 18,5 | 4 | 13 |
| QEGD2020R/L22 | 20x20 | 140 | 18,5 | 4 | 22 |
| QEGD2525R/L13 | 25x25 | 150 | 23,5 | 4 | 13 |
| QEGD2525R/L22 | 25x25 | 150 | 23,5 | 4 | 22 |
| QEHD2525R/L13 | 25x25 | 150 | 23 | 5 | 13 |
| QEHD2525R/L22 | 25x25 | 150 | 23 | 5 | 22 |
| QEKD2525R/L13 | 25x25 | 150 | 22,6 | 6 | 13 |
| QEKD2525R/L22 | 25x25 | 150 | 22,6 | 6 | 22 |
| QEKD3232R/L22 | 32x32 | 170 | 29,6 | 6 | 22 |
| Shape | CCGT |
| Processing | Finish |
| Worpiece Material | Steel and Stainless Steel |
| Grade | RTC+:PVD coated P05-P15 Cermet grade for finishing of steel and stainless steel |
| Packaging unit | 10 Pc. |
| r | L | I.C | S | d | |
| CCGT 060202-SF RTC+ | 0,2 | 6,4 | 6,35 | 2,38 | 2,8 |
| CCGT 060204-SF RTC+ | 0,4 | 6,4 | 6,35 | 2,38 | 2,8 |
| CCGT 09T302-SF RTC+ | 0,2 | 9,7 | 9,525 | 3,97 | 4,4 |
| CCGT 09T304-SF RTC+ | 0,4 | 9,7 | 9,525 | 3,97 | 4,4 |
| Grooving Insert | MGMR |
| Workpiece Materials | Steel & Stainless Steel |
| Grade | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Soft-cutting geometry for parting off
| B | R | L | S | Scope of application | |
| MGMR 200-J 6D RT300 | 2 | 0,2 | 16 | 3,5 | Steel & Stainless Steel |
| MGMR 300-J 6D RT300 | 3 | 0,2 | 21 | 4,8 | Steel & Stainless Steel |
| Shape | VCGT |
| Processing | High Speed Alu Turning |
| Workpiece Material | Aluminum, NF-Materials |
| Grade | RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic |
| Packaging unit | 2 Pc. |
PCD = Polycrystalline diamond (PCD) is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix.
| r | L | I.C | S | d | |
| VCGT 110302-1N RTD10 | 0,2 | 2,5 | 6,35 | 3,18 | 2,8 |
| VCGT 110304-1N RTD10 | 0,4 | 2,5 | 6,35 | 3,18 | 2,8 |
| VCGT 160402-1N RTD10 | 0,2 | 2,5 | 9,525 | 4,76 | 4,4 |
| VCGT 160404-1N RTD10 | 0,4 | 2,5 | 9,525 | 4,76 | 4,4 |
| VCGT 160408-1N RTD10 | 0,8 | 2,5 | 9,525 | 4,76 | 4,4 |
English
Deutsch
