Error!

List of products by brand Rinaldi-Tools GmbH

PCD-Insert - C-CCGW ...-1N RTD10

Price ab €31.90
Availability: 214748352 In Stock

Technical data

Shape C-CCGW
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic 
Packaging unit 2 Pc.

Dimensions

r L I.C S d
C-CCGW 060202-1N RTD10 0,2 2,5 6,35 2,38 2,8
C-CCGW 09T304-1N RTD10 0,4 2,5 9,525 3,97 4,4

High-performance PCD insert for excellent surface finishes

The PCD insert C-CCGW ...-1N RTD10 is specifically developed for the high-speed turning of aluminum alloys (up to 12% silicon), non-ferrous metals, and plastics. Its extremely hard cutting material made of polycrystalline diamond provides exceptional wear resistance, even in demanding abrasive machining tasks. The sturdy basic geometry ensures reliable and highly precise manufacturing processes, allowing you to consistently benefit from superior surface qualities and efficient machining cycles.

Advantages of PCD-Insert - C-CCGW ...-1N RTD10

  • Extremely high wear resistance due to polycrystalline diamond (PCD)
  • Convinces in high-speed aluminum turning with reliable cutting speeds
  • Creates favorable conditions for outstanding, dimensionally accurate surface finishes
  • Highly suitable for abrasive non-ferrous materials and various plastics
  • Supplied in a practical packaging unit of 2 pieces

PCD-Insert - CCGT ...-1N RTD10

Price ab €22.95
Availability: 222222214 In Stock

Technical data

Shape CCGT
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic
Packaging unit 2 Pc.

Dimensions

r L I.C S d
CCGT 060202-1N RTD10 0,2 2,5 6,35 2,38 2,8
CCGT 060204-1N RTD10 0,4 2,5 6,35 2,38 2,8
CCGT 09T302-1N RTD10 0,2 2,5 9,525 3,97 4,4
CCGT 09T304-1N RTD10 0,4 2,5 9,525 3,97 4,4
CCGT 09T308-1N RTD10 0,8 2,5 9,525 3,97 4,4

High-Precision PCD Insert CCGT ...-1N RTD10

The PCD insert CCGT ...-1N RTD10 is engineered for the high-speed turning of aluminum with up to 12% silicon content, non-ferrous metals, and plastics. Polycrystalline diamond (PCD) is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix, delivering exceptional wear resistance. ATTENTION! For aluminum with a low silicon content and soft materials with long chip formation, you must use this CCGT insert with a positive rake angle. ATTENTION! For abrasive materials such as aluminum with high silicon content, brass, brass alloys, brittle plastics, and glass-fiber reinforced materials, you need the CCGW insert.

Advantages of PCD-Insert CCGT ...-1N RTD10

  • Extremely hard PCD material ensures outstanding wear resistance
  • Positive rake angle supports efficient chip evacuation in soft materials
  • Creates excellent conditions for high-speed machining of non-ferrous metals
  • Supplied in a practical 2-piece packaging unit for professional applications

PCD-Insert - CCGW ...-1N RTD10

Price ab €22.95
Availability: 214748364 In Stock

Technical data

Plate Shape CCGW
Processing High Speed Alu Turning
Material Aluminum, NF-Materials
Coating RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic 
Packaging unit 2 Pc.

Dimensions

r L I.C S d
CCGW 060202-1N RTD10 0,2 2,5 6,35 2,38 2,8
CCGW 060204-1N RTD10 0,4 2,5 6,35 2,38 2,8
CCGW 09T302-1N RTD10 0,2 2,5 9,525 3,97 4,4
CCGW 09T304-1N RTD10 0,4 2,5 9,525 3,97 4,4
CCGW 09T308-1N RTD10 0,8 2,5 9,525 3,97 4,4

High-performance PCD insert for aluminum and non-ferrous metals

The PCD-Insert CCGW ...-1N RTD10 is engineered for high-speed aluminum turning. The highly wear-resistant cutting material PCD (Polycrystalline diamond) is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix.

ATTENTION! For abrasive materials such as aluminum with a high silicon content, brass and brass alloys, as well as brittle plastics and glass-fiber reinforced materials, you need the CCGW insert.

ATTENTION! For aluminum with a low silicon content and soft materials with long chip formation, you need the CCGT insert with a positive rake angle.

Advantages of PCD-Insert - CCGW ...-1N RTD10

  • Optimized for high-speed machining of aluminum up to 12% Si
  • Delivers precise results when turning non-ferrous metals and plastics
  • Reliably handles abrasive and glass-fiber reinforced materials

PCD-Insert - DCGT ...-1N RTD10

Price ab €22.95
Availability: 2147483635 In Stock

Technical data

Shape DCGT
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic 
Packaging unit 2 Pc.

Dimensions

r L I.C S d
DCGT 070202-1N RTD10 0,2 2,5 6,35 2,38 2,8
DCGT 070204-1N RTD10 0,4 2,5 6,35 2,38 2,8
DCGT 11T302-1N RTD10 0,2 2,5 9,525 3,97 4,4
DCGT 11T304-1N RTD10 0,4 2,5 9,525 3,97 4,4
DCGT 11T308-1N RTD10 0,8 2,5 9,525 3,97 4,4

High-Precision PCD Machining for Aluminum and NF-Materials

The PCD insert DCGT ...-1N RTD10 is specifically engineered for high-speed aluminum turning. Polycrystalline diamond (PCD) is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix. Attention: For aluminum with a low silicon content and soft materials with long chip formation, you need this DCGT insert with a positive rake angle. For abrasive materials such as aluminum with a high silicon content, brass and brass alloys, as well as brittle plastics and fiberglass-reinforced materials, you absolutely need the DCGW insert!

Advantages of PCD-Insert DCGT

  • Convinces with high wear resistance during high-speed turning
  • Extremely hard PCD material for economical machining processes
  • Positive rake angle ideally supports the processing of soft materials
  • Practical solution for clean surface finishes on aluminum up to 12% Si
  • Supplied in a convenient 2-piece packaging unit for secure stocking

PCD-Insert - DCGW ...-1N RTD10

Price ab €22.95
Availability: 214748356 In Stock

Technical data

Shape DCGW
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic
Packaging unit 2 Pc.

Dimensions

r L I.C S d
DCGW 070202-1N RTD10 0,2 2,5 6,35 2,38 2,8
DCGW 070204-1N RTD10 0,4 2,5 6,35 2,38 2,8
DCGW 11T302-1N RTD10 0,2 2,5 9,525 3,97 4,4
DCGW 11T304-1N RTD10 0,4 2,5 9,525 3,97 4,4
DCGW 11T308-1N RTD10 0,8 2,5 9,525 3,97 4,4

High-speed turning for abrasive materials

The PCD-Insert DCGW ...-1N RTD10 provides an excellent foundation for demanding turning operations. Polycrystalline diamond (PCD) is a synthetically produced, extremely hard, intergrown mass of randomly oriented diamond particles in a metal matrix. This specific DCGW shape is highly recommended for abrasive workpiece materials such as aluminum with high silicon content (up to 12% Si), brass, brittle plastics, and glass-fiber reinforced materials. For non-abrasive aluminum with low silicon content or soft materials producing long chips, a DCGT insert with a positive rake angle is required. The tools are supplied in a convenient packaging unit of 2 pieces.

Advantages of the PCD-Insert

  • Extremely hard cutting edge based on randomly oriented polycrystalline diamond
  • Designed for highly efficient high-speed aluminum turning
  • Provides a reliable solution for abrasive non-ferrous metals and plastics
  • Practical packaging unit of 2 pieces to support professional workflows

PCD-Insert - VBGT ...-1N RTD10

Price ab €22.95
Availability: 214748358 In Stock

Technical data

Shape VBGT
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic
Packaging unit 2 Pc.

Dimensions

r L I.C S d
VBGT 160402-1N RTD10 0,2 2,5 9,525 4,76 4,4
VBGT 160404-1N RTD10 0,4 2,5 9,525 4,76 4,4
VBGT 160408-1N RTD10 0,8 2,5 9,525 4,76 4,4

PCD Turning Insert for Aluminum and NF-Metals

The VBGT ...-1N RTD10 is a high-performance indexable insert equipped with polycrystalline diamond (PCD), specifically developed for professional high-speed turning. PCD consists of a synthetically produced, extremely hard mass of randomly oriented diamond particles within a metal matrix, ensuring exceptional wear resistance.

ATTENTION! For aluminum with a low silicon content (up to 12% Si) and soft materials that produce long chips, you strictly require this specific VBGT insert featuring a positive rake angle.
ATTENTION! For abrasive materials such as high-silicon aluminum, brass, brass alloys, brittle plastics, and fiberglass-reinforced materials, you must use the VBGW insert instead.

Advantages of VBGT ...-1N RTD10

  • Optimized for high-speed turning of aluminum (up to 12% Si) and non-ferrous metals
  • Positive rake angle promotes reliable chip control in soft workpiece materials
  • Wear-resistant PCD cutting material creates excellent conditions for long tool life
  • Supports efficient workflows by enabling high dimensional accuracy and superior surface finishes

PCD-Insert - VCGT ...-1N RTD10

Price ab €22.95
Availability: 2147483590 In Stock

Technical data

Shape VCGT
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic 
Packaging unit 2 Pc.

Dimensions

r L I.C S d
VCGT 110302-1N RTD10 0,2 2,5 6,35 3,18 2,8
VCGT 110304-1N RTD10 0,4 2,5 6,35 3,18 2,8
VCGT 160402-1N RTD10 0,2 2,5 9,525 4,76 4,4
VCGT 160404-1N RTD10 0,4 2,5 9,525 4,76 4,4
VCGT 160408-1N RTD10 0,8 2,5 9,525 4,76 4,4

High-precision PCD insert for aluminum machining

The PCD-Insert VCGT ...-1N RTD10 by Rinaldi-Tools is a highly specialized solution for high-speed turning of aluminum (up to 12% Si), non-ferrous metals, and plastics. The cutting edge made of polycrystalline diamond (PCD) provides extreme hardness and wear resistance. ATTENTION: For aluminum with a low silicon content and soft materials with long chip formation, you must use this VCGT insert with a positive rake angle. For abrasive materials like aluminum with a high silicon content, brass, or glass-fiber reinforced plastics, you need the VCGW insert instead.

Advantages of PCD-Insert VCGT ...-1N RTD10

  • Specifically optimized for high-speed aluminum turning to support efficient workflows
  • Positive rake angle aids the reliable machining of soft, long-chipping materials
  • High wear resistance due to the synthetically produced PCD cutting edge
  • Provides a solid foundation for achieving excellent surface finishes on complex contours

PCD-Insert - VCGW ...-1N RTD10

Price ab €22.95
Availability: 222222216 In Stock

Technical data

Shape VCGW
Processing High Speed Alu Turning
Workpiece Material Aluminum, NF-Materials
Grade RTD10: Polycrystalline diamond for high-speed machining of aluminum up to 12% Si, non-ferrous metals and plastic 
Packaging unit 2 Pc.

Dimensions

r L I.C S d
VCGW 110302-1N RTD10 0,2 2,5 6,35 3,18 2,8
VCGW 110304-1N RTD10 0,4 2,5 6,35 3,18 2,8
VCGW 160401-1N RTD10 0,1 2,5 9,525 4,76 4,4
VCGW 160402-1N RTD10 0,2 2,5 9,525 4,76 4,4
VCGW 160404-1N RTD10 0,4 2,5 9,525 4,76 4,4
VCGW 160408-1N RTD10 0,8 2,5 9,525 4,76 4,4

Designed for demanding high-speed aluminum turning

The PCD-Insert VCGW ...-1N RTD10 is specifically engineered for machining abrasive materials. Polycrystalline diamond (PCD) offers outstanding wear resistance when turning high-silicon aluminum, brass, and fiber-reinforced plastics. Please note: This VCGW version is the right choice for abrasive workpieces. For low-silicon aluminum or soft materials producing long chips, we recommend using the VCGT geometry.

Advantages of PCD-Insert - VCGW ...-1N RTD10

  • Extremely hard PCD material ensures prolonged tool life
  • Delivers efficient performance in high-speed turning applications
  • Practical solution for high-silicon aluminum and fiberglass reinforced plastics
  • Supports reliable processes when machining abrasive non-ferrous metals

RCKT...MO... for Stainless Steel

Price ab €4.90
Availability: 10000 In Stock
Shape RCKT
Workpiece
Materials

Stainless Steel

Grades

RT250M: PVD-coated M20-M30 carbide. 1st choice for stainless steel

RT253: CVD-coated M20-M35 carbide for roughing in stainless steel

Packaging unit 10 Pc.

  I.C S d
RCKT 1204MO-DM RT250M 12 4,76 4
RCKT 1204MO-ER RT253 12 4,76 4
RCKT 1606MO-ER RT253 16 6,35 5,56

Reverse Countersink - CCMT 06/09

Price ab €94.00
Availability: 1000000 In Stock

Technical data

Mill Type Reverse Countersink
Insert CCMT
Packaging Unit 1 Stück

Dimensions

D Dmin L L1 L2 L3 d g
RS-D18-K40 CCMT 06 18 10 110 60 47 40 20 4,05
RS-D20-K45 CCMT 06 20 12 117 67 52 45 20 3,8
RS-D26-K60 CCMT 06 26 17 132 82 67 60 20 5,05
RS-D33-K75 CCMT 09 33 21 152 102 82 75 20 6,65

Efficient solution for precise back spotfacing

The reverse countersink for CCMT 06 and 09 inserts is a reliable tool for the economic machining of hard-to-reach reverse bores. Its robust design, combined with proven standard indexable inserts, enables consistent results when producing countersinks and flat surfaces without the need for time-consuming workpiece repositioning.

Advantages of Reverse Countersink - CCMT 06/09

  • Saves time by eliminating additional setups
  • Compatible with standardized CCMT 06 and 09 indexable inserts
  • Stable cylindrical shank with 20 mm diameter for low-vibration machining
  • Four stepped versions cover diameters from 18 to 33 mm

Rotary Burr - Burrs Shape ball

Price ab €9.60
Availability: 9994 In Stock

Technical data

Mill Type Rotary Burr
Workpiece Materials Steel, Stainless Steel, Cast Iron, NF-Metals, Super Alloys & Hard Materials
Grade RT510=TiN-coated carbide burr for use with industrial robots or in manual operation
Schaft Cylindrical Shank
Shape Ball Shape
MOQ To Ø10 = 3, from Ø12 = 1  

Dimensions

D L1 L d
HMFS-K-D06-S06 RT510 6 5 50 6
HMFS-K-D08-S06 RT510 8 7 52 6
HMFS-K-D10-S06 RT510 10 9 54 6
HMFS-K-D12-S06 RT510 12 10 55 6
HMFS-K-D14-S06 RT510 14 12 57 6
HMFS-K-D16-S06 RT510 16 14 61 6

Rotary Burr - Burrs Shape ball

This high-quality carbide burr with a ball shape features a durable carbide head and a solid 6 mm steel shank. Designed for demanding stock removal tasks, it provides exceptional control for contouring and shaping various materials. The efficient cross-cut grinding and RT510 grade TiN coating deliver outstanding performance and reliability in both manual operation and automated industrial robot applications.

Advantages of Rotary Burr - Burrs Shape ball

  • High stock removal performance thanks to optimized cross-cut grinding
  • Smooth running behavior and excellent chip breaking for short chips
  • TiN coating supports prolonged service life in various steel grades
  • Universally suitable for steel, stainless steel, cast iron, and NF-metals
  • Suitable for versatile use on industrial robots or for manual operation

Rotary Burr - Burrs Shape cylindrical ball nose

Price ab €10.40
Availability: 9994 In Stock

Technical data

Mill Type Rotary Burr
Workpiece Materials Steel, Stainless Steel, Cast Iron, NF-Metals, Super Alloys & Hard Materials
Grade RT510=TiN-coated carbide burr for use with industrial robots or in manual operation
Schaft Cylindrical Shank
Shape Ball-Nosed Cylinder Shape
MOQ To Ø8 = 3, from Ø10 = 1  

Dimensions

D L1 L d
HMFS-WR-D06-S06 RT510 6 16 61 6
HMFS-WR-D08-S06 RT510 8 20 65 6
HMFS-WR-D10-S06 RT510 10 20 65 6
HMFS-WR-D12-S06 RT510 12 25 70 6
HMFS-WR-D14-S06 RT510 14 25 70 6
HMFS-WR-D16-S06 RT510 16 25 70 6

High-performance Rotary Burr in ball-nosed cylinder shape

This professional rotary burr features a solid carbide head and a 6 mm steel shank, designed for efficient stock removal. The ball-nosed cylinder shape provides flexible application options for machining flat surfaces, radii, and complex contours. With its advanced RT510 TiN coating and cross-cut grinding, this tool offers excellent prerequisites for demanding milling tasks, both on industrial robots and in manual operation.

Advantages of Rotary Burr - Burrs Shape cylindrical ball nose

  • High stock removal performance thanks to effective cross-cut grinding
  • Smooth running characteristics and short chips for reliable processing
  • Universally suitable for a wide range of materials including steel, cast iron, and NF-metals
  • TiN coating delivers enhanced tool life and performance in all steel grades
  • Versatile usage on industrial robots or for manual operations

Rotary Burr - Burrs Shape cylindrical without end fase cut

Price ab €10.40
Availability: 9994 In Stock

Technical data

Mill Type Rotary Burr
Workpiece Materials Steel, Stainless Steel, Cast Iron, NF-Metals, Super Alloys & Hard Materials
Grade RT510=TiN-coated carbide burr for use with industrial robots or in manual operation
Schaft Cylindrical Shank
Shape Cylinder Shape
MOQ To Ø8 = 3, from Ø10 = 1 

Dimensions

D
L1
L
d
HMFS-Z-D06-S06 RT510 6 16 61 6
HMFS-Z-D08-S06 RT510 8 20 65 6
HMFS-Z-D10-S06 RT510 10 20 65 6
HMFS-Z-D12-S06 RT510 12 25 70 6
HMFS-Z-D14-S06 RT510 14 25 70 6
HMFS-Z-D16-S06 RT510 16 25 70 6

Efficient material removal with cross-cut

The professional Rotary Burr - Burrs Shape cylindrical without end fase cut provides a reliable solution for demanding machining tasks in various materials. Zylinderform.svg

Advantages of Rotary Burr - Burrs Shape cylindrical without end fase cut

  • Cross-cut grinding ensures smooth running and short chips
  • TiN coating (RT510) supports high performance across all steel grades
  • Universally applicable for a wide range of materials
  • Suitable for manual operation and industrial robots

Rotary Burr - Burrs Shape flame

Price ab €10.40
Availability: 10000 In Stock

Technical data

Mill Type Rotary Burr
Workpiece Materials Steel, Stainless Steel, Cast Iron, NF-Metals, Super Alloys & Hard Materials
Grade RT510: TiN-coated carbide burr for use with industrial robots or in manual operation
Schaft Cylindrical Shank
Shape Flame Shape
MOQ To Ø8 = 3, from Ø10 = 1

Dimensions

D L1 L d
HMFS-F-D06-S06 RT510 6 18 63 6
HMFS-F-D08-S06 RT510 8 20 65 6
HMFS-F-D10-S06 RT510 10 25 70 6
HMFS-F-D12-S06 RT510 12 32 77 6
HMFS-F-D14-S06 RT510 14 34 79 6
HMFS-F-D16-S06 RT510 16 36 81 6

Efficient material processing with the flame-shaped carbide burr

The flame-shaped carbide rotary burr from Rinaldi-Tools is a professional solution for demanding edge and contour machining. Equipped with a robust 6 mm steel shank and a high-performance carbide head, this tool enables high stock removal thanks to its precise cross-cut grinding. The flame geometry is ideal for hard-to-reach areas, weld seams, and complex workpiece contours.

Advantages of the flame shape rotary burrs

  • Flexible use on industrial robots or for manual operation
  • Excellent stock removal performance due to reliable cross-cut grinding
  • Smooth running properties and short chips for controlled handling
  • Wear-resistant TiN coating for a long service life in all steel grades
  • Universally suitable for steel, stainless steel, cast iron, non-ferrous metals, and super alloys

Rotary Burr - Burrs Shape Inverted Cone

Price ab €9.60
Availability: 10000 In Stock

Technical data

Mill Type Rotary Burr
Workpiece Materials Steel, Stainless Steel, Cast Iron, NF-Metals, Super Alloys & Hard Materials
Grade RT510: TiN-coated carbide burr for use with industrial robots or in manual operation
Schaft Cylindrical Shank
Shape Inverted Cone Shape
MOQ To Ø10 = 3, from Ø12 = 1

Dimensions

D L1 L d
HMFS-W-D06-S06 RT510 6 7 52 6
HMFS-W-D08-S06 RT510 8 8 53 6
HMFS-W-D10-S06 RT510 10 10 55 6
HMFS-W-D12-S06 RT510 12 13 58 6
HMFS-W-D14-S06 RT510 14 15 60 6
HMFS-W-D16-S06 RT510 16 16 61 6

Reliable Edge and Contour Machining

The carbide rotary burr in inverted cone shape with a 6 mm steel shank is a well-thought-out solution for demanding edge and chamfering work. Thanks to the TiN coating (grade RT510) and the robust cross-cut grinding, you achieve excellent stock removal results even with tough materials.

Advantages of the Inverted Cone Rotary Burrs

  • High stock removal performance supported by effective cross-cut grinding
  • Smooth running behavior and short, easy-to-handle chips
  • Universally suitable for a wide range of materials
  • Extended service life in all steel grades due to the resilient TiN coating
  • Highly flexible for use on industrial robots or in manual operations

Rotary Burr - Burrs Shape pointed arch

Price ab €10.40
Availability: 9984 In Stock

Technical data

Mill Type Rotary Burr
Workpiece Materials Steel, Stainless Steel, Cast Iron, NF-Metals, Super Alloys & Hard Materials
Grade RT510=TiN-coated carbide burr for use with industrial robots or in manual operation
Schaft Cylindrical Shank
Shape Pointed Tree Shape
MOQ To Ø8 = 3, from Ø10 = 1 

Dimensions

D L1 L d
HMFS-SB-D06-S06 RT510 6 18 63 6
HMFS-SB-D08-S06 RT510 8 17 63 6
HMFS-SB-D10-S06 RT510 10 20 65 6
HMFS-SB-D12-S06 RT510 12 25 70 6
HMFS-SB-D14-S06 RT510 14 25 70 6
HMFS-SB-D16-S06 RT510 16 25 70 6

High-Performance Pointed Arch Burrs

The professional rotary burr in a pointed arch shape provides a reliable solution for demanding contour machining tasks. Featuring a durable carbide head and a solid 6 mm steel shank, this tool opens up versatile applications in industrial metalworking. It is perfectly suited for both manual operation and automated processes using industrial robots.

Advantages of Rotary Burr - Burrs Shape pointed arch

  • High stock removal performance supported by advanced cross-cut grinding.
  • Ensures a smooth running operation and produces short, manageable chips.
  • Universally applicable across a wide range of materials.
  • The TiN coating (RT510 grade) supports extended tool life and consistent performance in all steel grades.
  • Sturdy construction combining a carbide head with a cylindrical steel shank.

Rotary Burr - Burrs Shape pointed cone

Price ab €10.40
Availability: 9982 In Stock

Technical data

Mill Type Rotary Burr
Workpiece Materials Steel, Stainless Steel, Cast Iron, NF-Metals, Super Alloys & Hard Materials
Grade RT510=TiN-coated carbide burr for use with industrial robots or in manual operation
Schaft Cylindrical Shank
Shape Pointed Cone Shape
MOQ To Ø8 = 3, from Ø10 = 1

Dimensions

D L1 L d
HMFS-SK-D06-S06 RT510 6 18 63 6
HMFS-SK-D08-S06 RT510
8 17 63 6
HMFS-SK-D10-S06 RT510
10 20 65 6
HMFS-SK-D12-S06 RT510
12 25 70 6
HMFS-SK-D14-S06 RT510
14 25 70 6
HMFS-SK-D16-S06 RT510
16 25 70 6

High-performance carbide burr for metalworking

This rotary burr with a carbide head and 6 mm steel shank offers excellent processing capabilities. The TiN coating supports a reliable tool life in professional environments.

Advantages of Rotary Burr - Burrs Shape pointed cone

  • High stock removal performance thanks to cross-cut grinding
  • Smooth running behavior and short chip formation
  • Universally suitable for a wide range of materials
  • TiN coating supports long service life in steel grades
  • Flexible application on industrial robots or manual operation

Rotary Burr - Burrs Shape round arch

Price ab €10.40
Availability: 10000 In Stock

Technical data

Mill Type Rotary Burr
Workpiece Materials Steel, Stainless Steel, Cast Iron, NF-Metals, Super Alloys & Hard Materials
Grade RT510=TiN-coated carbide burr for use with industrial robots or in manual operation
Schaft Cylindrical Shank
Shape Ball-Nosed Tree Shape
MOQ To Ø8 = 3, from Ø10 = 1

Dimensions

Item Nr. D L1 L d
HMFS-RB-D06-S06 RT510 2800041 6 18 63 6
HMFS-RB-D08-S06 RT510 2800042 8 18 63 6
HMFS-RB-D10-S06 RT510 2800043 10 20 65 6
HMFS-RB-D12-S06 RT510 2800044 12 25 70 6
HMFS-RB-D14-S06 RT510 2800045 14 25 70 6
HMFS-RB-D16-S06 RT510 2800046 16 25 70 6

Efficient Material Removal with Ball-Nosed Tree Shape

This TiN-coated rotary burr featuring a ball-nosed tree shape is designed for professional use on industrial robots as well as for manual operation. The cross-cut grinding enables swift and controlled material removal across a wide range of materials.

Advantages of Rotary Burr - Burrs Shape round arch

  • TiN coating delivers strong performance across all steel grades
  • Smooth running behavior and formation of short chips
  • Universally suitable for steel, cast iron, NF metals, and hard materials
  • Highly flexible for application on industrial robots or manual tools

Rotary Burr - Burrs Shape round cone

Price ab €10.40
Availability: 9994 In Stock

Technical data

Mill Type Rotary Burr
Workpiece Materials Steel, Stainless Steel, Cast Iron, NF-Metals, Super Alloys & Hard Materials
Grade RT510: TiN-coated carbide burr for use with industrial robots or in manual operation
Schaft Cylindrical Shank
Shape Ball-Nosed Cone Shape
MOQ To Ø8 = 3, from Ø10 = 1

Dimensions

D L1 L d
HMFS-RK-D06-S06 RT510 6 16 61 6
HMFS-RK-D08-S06 RT510
8 22 67 6
HMFS-RK-D10-S06 RT510
10 25 70 6
HMFS-RK-D12-S06 RT510
12 28 73 6
HMFS-RK-D14-S06 RT510
14 28 73 6
HMFS-RK-D16-S06 RT510
16 33 78 6

Efficient stock removal with advanced cross-cut grinding

This carbide rotary burr in a ball-nosed cone shape is engineered for demanding machining operations. The combination of a resilient carbide head, a 6 mm steel shank, and a protective TiN coating establishes optimal conditions for high material removal rates.

Advantages of Rotary Burr - Burrs Shape round cone

  • TiN coating supports enhanced durability across all steel grades
  • Cross-cut grinding enables outstanding stock removal performance
  • Short chips and smooth running facilitate safe handling
  • Versatile application potential in a wide variety of materials
  • Suitable for both industrial robots and manual operation